|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CODERS E90 E91 E92 E93 in UK
|
|
11-28-2017, 07:06 PM | #749 |
Registered
0
Rep 1
Posts |
I'm looking for a coder who can reset my CIC retrofit. It was done with script activation so I cannot update the maps even with the proper code. I'd like the CIC to be set to my car VIN and having it work with FSC so I can later update the maps.
I'm in Northampton but will travel if need be. Thanks. |
Appreciate
0
|
02-07-2018, 06:01 PM | #751 |
Captain
68
Rep 763
Posts
Drives: BMW E90 Dinan stage 3 335I
Join Date: Mar 2017
Location: Peoples Republic of California
|
my M3 cluster in my 335i has an issue
2007 pre-lci M3 cluster in same thinks the oil pressure gauge is a fuel efficiency gauge. My previous cluster had the oil temp gauge. Does any coder know how to fix this? Thanks!
__________________
2007 E90 335i N54 Montego blue with grey Dakota leather interior
Last edited by MILLER335I; 02-07-2018 at 07:01 PM.. |
Appreciate
0
|
03-24-2018, 03:34 PM | #753 |
Registered
0
Rep 2
Posts |
I'd like to invest a few grand in my car adding as much stuff as I can, if anyone wants a big job somewhere around Cheshire / Manchester / South Yorkshire (I travel a lot) then I'm interested in:
CCC to CIC - including adding USB (none fitted currently only Aux) Reverse camera All dealer coding options enabling (well, maybe not all, but almost) Folding mirrors Heated seats --> can this even be done, with new seats? I got the car at a low price with low miles so I'm going for it on the retrofits... open to other ideas too. Also interested in re-trimming, I fancy some Novillo leather |
Appreciate
0
|
06-08-2018, 07:52 AM | #756 | |
Horse power over man power
0
Rep 2
Posts |
Quote:
do you still do installs? looking to install alpine upgrade into my e92 lci. thanks |
|
Appreciate
0
|
06-12-2018, 12:26 PM | #758 |
Enlisted Member
10
Rep 46
Posts |
Hi all, I am new here. I got an BMW E91 2005 and the body control module has been replaced due to previous one failure. Most of the electronics are not working properly. Can someone advice if this needs programming or coding? If so, please can someone let me know what would be acceptable price for that. Sorry if this is the wrong place to ask.
|
Appreciate
0
|
07-25-2018, 06:08 AM | #759 |
New Member
2
Rep 12
Posts |
Hi,
i am having some trouble in coding base to hifi on my 2012 CIC with a complete aftermarket system . do you know the exact process for it ? i live in east london/essex. thanks |
Appreciate
0
|
08-17-2018, 02:50 PM | #760 |
New Member
0
Rep 8
Posts
Drives: Bmw 320D E90 2006
Join Date: Jun 2018
Location: Kent
|
|
Appreciate
0
|
08-28-2018, 04:39 PM | #762 |
New Member
0
Rep 6
Posts
Drives: 2010 x5 Xdrive 3.0
Join Date: Aug 2018
Location: California
|
Upgrade E70 2010
HI, so I have been going for some number of months, reading, and some modifications(without any added codes).
I Have a E70 X5 3.0si USA and I am in USA. Can anyone help me, or yield a specific set of procedure to me which I will need to do? thanks. Here is my specs: Type code FE43 Type GEFZG Engine N52K Production date is 2009-11-25 Here it seem easier to just add the photos. I am attempting to have control over my system, and particularly add a amp with sub. So, I would want the outputs to be more flat, or coded to Hifi? I have the base with 6 speaker and tweeters, center speaker placement but empty. I think its CIC, pro Nav, us radio, Sirius, cell options, satellite tuner, COP, USB audio interface, all the integration options with no radio it seems. or no amp. the system has MOST. Combox, SOS call, HID lights and controls, no heads up display. |
Appreciate
0
|
08-28-2018, 04:43 PM | #763 |
New Member
0
Rep 6
Posts
Drives: 2010 x5 Xdrive 3.0
Join Date: Aug 2018
Location: California
|
it seems the best route is to code to Hifi, and this is done with a purchase only?
and then do the following sequential codes from the listed parameters above? the only thing, everyone is UK, and the models definitely make these things confusion of all. I know my x5 has the lower of the years base audio. and I have no disk or grace note CD, not even a stock one. IT has a grace note in system in hidden menu for the original programming, and I have the model that shows up as no programing available via interface. so I am not sure what to do at this point. |
Appreciate
0
|
10-01-2018, 02:47 AM | #764 |
New Member
2
Rep 22
Posts |
|
Appreciate
0
|
11-06-2018, 03:24 PM | #765 |
Registered
0
Rep 1
Posts |
Hi
I have a 320d M Sport Business Edition and am looking to update the maps or even the firmware if possible via a new combox? However I do not have the tick on the lower corner of my navigation which from other posts suggests that my firmware does need updating before I can even update via usb. Is this correct? Does anyone know anybody in the north midlands that can do this or aware of how to do this myself? Thanks in advance |
Appreciate
0
|
11-16-2018, 05:54 AM | #767 |
New Member
2
Rep 22
Posts |
|
Appreciate
0
|
01-08-2019, 10:31 AM | #769 |
New Member
0
Rep 7
Posts |
Hi,
Any coders around South East London or Essex area that could help me with a couple of issues? 1. The scroll wheel on my idrive does not really work. If i spin the wheel as fast as I can it will react extrememly slowly and i can get things done like resetting journey computer etc. but it's pretty ridiculous. I assume this is what other people who claim their wheel doesn't work are experiencing too. If i reset/upgraded the idrive software would this start working? I understand from reading the forums that the system needs to be reset in order for a new scroll wheel to interact with it. 2. The bumpers have parking sensors in them with the cables however they do not lead anywhere further than the inside of the boot. The idrive inside the car has the parking sensor button so if I bought the sender unit that is between the idrive and sensors what are the chances I will have fully working sensors? I want the visual display etc on the screen like you're meant to have. Please let me know if you think you may be able to help Last edited by mattegreythree; 03-25-2019 at 09:41 AM.. |
Appreciate
0
|
01-10-2019, 02:15 AM | #770 | |
Colonel
532
Rep 2,503
Posts |
Quote:
1. I doubt this is a firmware or software issue. What generation of idrive do you have? CCC or CIC? Try a hard reset. But it's more likely a hardware problem. 2. Have you actually inspected if you have a PDC control unit? The e90 has a common problem with water ingress in the PDC module. Often it causes CAN bus faults and is unplugged as a quick fix. Have a look at the module. PDC is behind the trim by the battery in the boot. https://www.newtis.info/tisv2/a/en/e...ol-pdc/OXOJHMT |
|
Appreciate
0
|
Bookmarks |
|
|