[Il_Simo]

Just a question, i have a F30 with cic but I haven't a usb port in glove box but just a usb port in the middle console.
what can i do to extract 1b file?
can Bimmercode or bimmerlink help me?
thanks

[frozenfire]

Originally Posted by Il_Simo

Just a question, i have a F30 with cic but I haven't a usb port in glove box but just a usb port in the middle console.
what can i do to extract 1b file?
can Bimmercode or bimmerlink help me?
thanks

Assuming your CIC is running C1A, the easiest way will be to just spend the money and run the cable. It is really easy.

https://f30.bimmerpost.com/forums/sh....php?t=1108386

You can get the cable and usb connector for like $40 usd off ebay. I can't imagine it's much different cost in EU.

[Virgil12]

I did get my 1b but when i'm trying to enter the license it is invalid. i opened the 1b and seems odd. i've looked through other ones and did not appear 1234567 as VIN.
Any solution?

[nn42day]

Hi all, and many thanks to Portalseo for the guide, I have downloaded the files and copied the copie_scr.sh file to a newly formatted fat32 usb drive and followed the instructions to the letter. however its not populating with the required hex files. I have tried another 4GB drive but same again, also tried rufus application to format the drive, but still no joy.

I just wanted to check if the version of CIC I have is compatible, car is a 2009 LCI 320d RHD according to an online VIN decoder, build date is 2009-06-02 and I have S609 Navigation System Professional (wide screen).

Is there a different method to get the required data in order to produce a FSC code?



The current version of maps is ECE 401143.2.10 - Europe WEST Premium 2015-2.
I have downloaded the 2022 Premium map as per link supplied by Penfold2015, Thanks for that!

[alingham]

Hi all,

I've followed all the steps for this post in my 2012 F30. It has the CIC not the NBT system.

I've downloaded the map I need (Aus/NZ PREMIUM 2020 maps) and have put them onto the USB drive, and then plugged it into the glovebox.
The current map loaded in the car is Road Map Japan PREMIUM 2016. The version number at the top says 08.00.2000.

Plug the usb stick containing your downloaded map version in the glove box of your car and switch your ignition on. After a couple of minutes your CIC will prompt you to update your map version.

After a couple of minutes, there is no prompt to update the map version to even get to entering the FSC code that I generated.

I've unzipped, and put the config.nfm and pkgdb folder in the root of the USB as per all the instructions I've read.


Is there something I'm doing wrong, or something else I can do to get the CIC to register that there is a map update available on the USB?

TIA for any help.

[shawnsheridan]

Originally Posted by alingham

Hi all,

I've followed all the steps for this post in my 2012 F30. It has the CIC not the NBT system.

I've downloaded the map I need (Aus/NZ PREMIUM 2020 maps) and have put them onto the USB drive, and then plugged it into the glovebox.
The current map loaded in the car is Road Map Japan PREMIUM 2016. The version number at the top says 08.00.2000.

After a couple of minutes, there is no prompt to update the map version to even get to entering the FSC code that I generated.

I've unzipped, and put the config.nfm and pkgdb folder in the root of the USB as per all the instructions I've read.

Is there something I'm doing wrong, or something else I can do to get the CIC to register that there is a map update available on the USB?

TIA for any help.

Asked and answered:

https://www.bimmerfest.com/threads/n.../post-13683494

[centrum]

Originally Posted by Casual_Az

Apparently my car can only update maps through DVD and I found the latest maps for Europe East PREMIUM, but they are in USB version and I can't seem to find the ones for DVD.

Can I use the USB version with DVD?
Thanks.

EDIT: if 2022 one doesn't work with DVD, can anyone link the latest Europe East premium maps version for DVD?

Hi,

Where did you find the USB File version of the Europe Next 2022-1 map download link?

I'm looking for Road Map EUROPE Next 2022-1 or closest possible to date.
My Map Version is:
Europa
BMW Group
101131.3.117
Road Map EUROPE Next 2014-1

NBT_G13024l

Thank you in advance,
Centrum

[IggyPop]

Can anyone please Generate me an FSC code for this Map: Road Map Europe West MOVE 2021
Vin: D604322

Thanks

[Garkov]

Hello! Can anyone generate me an FCS code? I tried so many times to do it by myself ,but i can't get the 1b file from the car..
I will be so happy if anyone help me!

[Peter@A]

Tried 6 USB sticks with no success not getting anything no 1b.hex (and fsc.bat)

[djdomi2]

Hello, i have a 06-2012 F30 and want to update the maps. I can not pull the 1b.hex from the navi. I have only one USB port under the armrest, i have no USB in glovebox. Is it possible to pull the 1b from there? I formatted the USB to FAT32, and put the copie_scr on it, but it does not pull the 1b.

[opjose]

Originally Posted by djdomi2

Hello, i have a 06-2012 F30 and want to update the maps. I can not pull the 1b.hex from the navi. I have only one USB port under the armrest, i have no USB in glovebox. Is it possible to pull the 1b from there? I formatted the USB to FAT32, and put the copie_scr on it, but it does not pull the 1b.

Post your VIN.

The glovebox USB port is required to use the script.

You may not have a compatible CIC installed or another model, e.g. business instead.

[Delian]

Originally Posted by Peter@A

Tried 6 USB sticks with no success not getting anything no 1b.hex (and fsc.bat)

Same here.

[Rajmun340]

Originally Posted by portalseo

.]

portalseo, critical info which should be added on the first page :

I found the explanation and solution to most problems in this thread regarding the Idrive not recognizing your USB.

All Windows OSs versions are designed to not allow formatting a USB drive larger than 32GB (2.0 or 3.0 regardless) to FAT32 format (64 GB, 128 GB drives). Only exFAT will be proposed by Window which won't work with the idrive for an e9x . After doing some internet search i learned that FAT32 has no such limitation implied by Window OS, in fact 1 TB is possible in FAT32 ! To go around Window OS was easy after I downloaded a small free tool that does exactly that and I formatted my 3.0 USB 128 GB drive to FAT32. It takes 10 seconds. After having gone through the whole update process and seeing it failing to be recognized by Idrive in exFAT format (as predicted). It all went smoothly in FAT32 No problems at all. Takeaway points are :
- You CAN use > 32 GB USB sticks. The problem was people being forced by Window OS to format to exFAT since Window does not let you select FAT32 for > 32 GB drives. But the free tool does.

- Idrive has no problem at all reading USB 3.0 USB only the transfer speed will be halved (which is still same as USB 2.0) since idrive does not support 3.0 speeds.

- You CAN use a larger capacity USB. i used a brand new 128 GB USB stick

To conclude, it all depends on the size of your maps data. If the year is after 2018 then it will be > 28 GB ,and you're going to need a large USB drive and pay attention to this post.

- Last but not least. Once your update is started, you can drive the car and don't have to finish the update on that day. You can turn off ignition and idrive will be happy to automatically resume the update where it left off on any day, you don't even have to take the USB stick out, which is pretty cool. Most importantly no need to waste your battery. The idrive will ask you again if you want to update the navg then it will resume where it left off.

FAT32 formating free tool for USB sticks > 32 GB (64 GB, 128 GB, 256 GB..)
http://ridgecrop.co.uk/index.htm?guiformat.htm

[johannesrose]

I keep getting an empty 1b.hex file. What am I doing wrong? Could someone maybe make one for me so I can update my map?
Thank you

[lnxguy]

How can someone make a 1B for you? lol. Try a different USB stick.

[NickEs]

I inherited a like-new BMW X3 xDrive30i from my dad, who passed away at 95 last May.

The nav system has maps dated 2018 (North America EVO 2018-1, NBTevo_U19384I), with the region set to NC/SC. I live in the NY region, but it looks to be very difficult to change the region via E-SYS or BimmerCode, so I'm leaving it as is.

However, I'd love to update the maps to something newer. So, for that, it looks like I need the 1b file.

I've practically torn the car apart, and it really seems like there's only one USB port -- in the front center console, near the cigarette-lighter power port. Nothing in the armrest storage box, glove compartment, or back seat climate controls. I didn't find anything under the dashboard, either.

Unless I'm mistaken, then, it looks like the only way to get it is via E-SYS and the OBDII port, correct?

If so:

I've got an E-SYS OBDII-to-Ethernet cable (and an Ethernet-to-USB-C adapter, in case there's an app for Android; I don't have a laptop, and otherwise I'd have to string a USB cable about 40 feet from my PC to the car).

Are there any good instructions for me (a BMW-coding newbie, but pro software developer) that I can use to get that precious 1b file and accomplish a map update?

Thanks for any leads!

[shawnsheridan]

Originally Posted by NickEs

I inherited a like-new BMW X3 xDrive30i from my dad, who passed away at 95 last May.

The nav system has maps dated 2018 (North America EVO 2018-1, NBTevo_U19384I), with the region set to NC/SC. I live in the NY region, but it looks to be very difficult to change the region via E-SYS or BimmerCode, so I'm leaving it as is.

However, I'd love to update the maps to something newer. So, for that, it looks like I need the 1b file.

I've practically torn the car apart, and it really seems like there's only one USB port -- in the front center console, near the cigarette-lighter power port. Nothing in the armrest storage box, glove compartment, or back seat climate controls. I didn't find anything under the dashboard, either.

Unless I'm mistaken, then, it looks like the only way to get it is via E-SYS and the OBDII port, correct?

If so:

I've got an E-SYS OBDII-to-Ethernet cable (and an Ethernet-to-USB-C adapter, in case there's an app for Android; I don't have a laptop, and otherwise I'd have to string a USB cable about 40 feet from my PC to the car).

Are there any good instructions for me (a BMW-coding newbie, but pro software developer) that I can use to get that precious 1b file and accomplish a map update?

Thanks for any leads!

EVO does not have a 1B File for you to pull.

[NickEs]

Originally Posted by shawnsheridan

EVO does not have a 1B File for you to pull.

This is the first I'd heard of that. Then how does one update the maps? Isn't a 1b file necessary necessary to generate the FSC code?

[shawnsheridan]

Originally Posted by NickEs

This is the first I'd heard of that. Then how does one update the maps? Isn't a 1b file necessary necessary to generate the FSC code?

If it's EVO ID4, it has an F0 File, and if EVO ID5/6 it has no Nav Enabler File at all, and FSC cannot be generated.

[NickEs]

Originally Posted by shawnsheridan

If it's EVO ID4, it has an F0 File, and if EVO ID5/6 it has no Nav Enabler File at all, and FSC cannot be generated.

Thank you, Shawn. I apologize for the late thanks; I needed to go to Tampa on a family emergency.

It's disheartening to find that after a year's worth of research, everything I thought I knew about upgrading the maps was wrong.

So, it turns out that my system is ID6 (three tiles per page, not five). Which leaves me with the question: since I evidently can't generate an FSC on my own, can I update the maps on this system at all using E-SYS? If not, what options do I have?

Thank you again!

[shawnsheridan]

Originally Posted by NickEs

Thank you, Shawn. I apologize for the late thanks; I needed to go to Tampa on a family emergency.

It's disheartening to find that after a year's worth of research, everything I thought I knew about upgrading the maps was wrong.

So, it turns out that my system is ID6 (three tiles per page, not five). Which leaves me with the question: since I evidently can't generate an FSC on my own, can I update the maps on this system at all using E-SYS? If not, what options do I have?

Thank you again!

Not E-Sys. Options are OEM FSC Code or Aftermarket EVO Patch and FSC Code set.