What did you do to your car today?

SuaveSpoolin · 04-12-2014, 09:01 PM

Quote:

Originally Posted by 3Coupe4Me

Today I took my car from this ABS error

To no ABS error

By replacing this (DSC Hydro Unit)

DIY to come once I get it all written up.

Howd you do this yo! I have the same lights on except the service engine!! Please help

AGO 530 · 04-12-2014, 10:52 PM

I used the Q5 loaner (X5 at dealer) to take my E90's summers to get balanced.

SirHoward · 04-12-2014, 11:36 PM

Update! Picked them up from UPS today!

(iPhone Pic, Sorry!!)

MMMCOOKIES55 · 04-13-2014, 12:05 AM

Gave her a nice spring correction.

tc535i · 04-13-2014, 12:07 AM

Ordered er fmic, er cp with Tial q bov, and blacklines

Bitch better appreciate it!

Monster900 · 04-13-2014, 12:13 AM

Quote:

Originally Posted by MMMCOOKIES335...

Gave her a nice spring correction.

^ Did exact same thing today after crazy winter we had this year. It took 8 hrs to complete.

Curt · 04-13-2014, 12:32 AM

Had my CA Smog emissions test pass after 2 fails in a row

NEFARIOUS · 04-13-2014, 01:45 AM

Washed the car and cleaned off all the pine tree sap off

... I didn't know how much those trees dripped until now! There goes the only spot in the shade.

maxxxboost · 04-13-2014, 01:47 AM

In the works to get a dual exhaust conversion on my 325i

tmdals0213 · 04-13-2014, 06:27 AM

Quote:

Originally Posted by SirHoward

Update! Picked them up from UPS today!

(iPhone Pic, Sorry!!)

Quote:

Originally Posted by SirHoward

Found a set of M3 E92/E93 Side Mirrors for only $615 shipped

link pleaseeeee, but wait.. were they auto fold and heated??

StayClassy7 · 04-13-2014, 09:34 AM

Quote:

Originally Posted by maxxxboost

In the works to get a dual exhaust conversion on my 325i

How much is the conversion?

woggledog · 04-13-2014, 09:57 AM

Took he acoustic shield off the top of the engine and started cleaning. I think it's the first time someone has done this to this car. Took me 40 mins just to do around the oil filler port. I have a long road ahead of me, from what I can see :-)

When I get back off my holiday, the inlet manifold and EGR are coming off for a clean. Am dreading that!

dkay1 · 04-13-2014, 11:14 AM

Took off the roof rack, washed the car, drove with the windows down and music turned up...

SCMalum · 04-13-2014, 11:57 AM

Drove her to the shop to get a headlight fixed unfortunately : (.

Mardio · 04-13-2014, 11:58 AM

Put gas in... again.

bransan · 04-13-2014, 01:03 PM

Washed/waxed and adjusted LF door, wasn't closing tight. Now if I could just find some replacement covers for the roof rack attachment locations.

Nicky92 · 04-13-2014, 08:03 PM

Washed it lol

DF · 04-13-2014, 08:13 PM

put the dci on and cleaned and conditioned the leather

maxxxboost · 04-13-2014, 11:01 PM

Quote:

Originally Posted by StayClassy7

How much is the conversion?

I am just buying all the parts now but i think it will be roughly $650-850 CAD.

$200 Bumper (OEM 335i rear bumper with PDC; picked up today)
$80-100 Magnaflow 11148 muffler (eBay)
$80-100 2x Magnaflow 4" double walled stainless steel tips (eBay)
$300-450 muffler install and paint (really rough estimate; local shops)

How i plan on doing this.

Remove my OEM 325i bumper
Cut my OEM 325i muffler
Test fit the OEM 335i bumper and drive it to the muffler shop without an exhaust (LOL)
Get it fitted with all the Magnaflow parts
Drive it to the autobody shop and get the 335i bumper painted
Have a beer

Efthreeoh · 04-14-2014, 06:19 AM

Pulled the drive shaft and replaced the center bearing.

StayClassy7 · 04-14-2014, 08:47 AM

Quote:

Originally Posted by maxxxboost

I am just buying all the parts now but i think it will be roughly $650-850 CAD.

$200 Bumper (OEM 335i rear bumper with PDC; picked up today)
$80-100 Magnaflow 11148 muffler (eBay)
$80-100 2x Magnaflow 4" double walled stainless steel tips (eBay)
$300-450 muffler install and paint (really rough estimate; local shops)

How i plan on doing this.

Remove my OEM 325i bumper
Cut my OEM 325i muffler
Test fit the OEM 335i bumper and drive it to the muffler shop without an exhaust (LOL)
Get it fitted with all the Magnaflow parts
Drive it to the autobody shop and get the 335i bumper painted
Have a beer

Sounds like a good day to me. I've been wanting to get quad exhaust for sometime now for my 328i. Would that increase HP or torgue? And how much would that usually cost?

maxxxboost · 04-14-2014, 05:31 PM

Quote:

Originally Posted by StayClassy7

Sounds like a good day to me. I've been wanting to get quad exhaust for sometime now for my 328i. Would that increase HP or torgue? And how much would that usually cost?

I'm doing this purely for aesthetic so my objective is not the same as your if you plan on adding ponies to your ride.

Honestly, i don' think you'll get much (if any) HP/Torque increases. But then again it really depends on how you piece it together, what type of piping you get (crush bend or mandrel bend), axle-back style or full system, etc. Depending on how you get it done, it will cost you so much more.

The cost benefit is just no there if you want more hp/ torque.

04-12-2014, 10:52 PM	#794
AGO 530 ... 27 Rep 194 Posts Drives: SG '24 M3CX Join Date: Feb 2010 Location: Toronto iTrader: (2) Garage List 2017 BMW M3 [0.00]	I used the Q5 loaner (X5 at dealer) to take my E90's summers to get balanced. Attached Images __________________ SOLD Mineral White '17 M3 Comp / Dinan S2 / FBO SOLD AW '15 435i F36 Msport / EUROCHARGED TUNED, STAGE 2 / FBO SOLD AW '11 335i E90 MSport FBO
	Appreciate 0 Quote

04-12-2014, 11:36 PM	#795
SirHoward Captain 85 Rep 693 Posts Drives: Da Car I Wanted Join Date: Oct 2010 Location: Driver's Seat iTrader: (0)	Update! Picked them up from UPS today! (iPhone Pic, Sorry!!) Attached Images
	Appreciate 0 Quote

04-13-2014, 12:05 AM	#796
MMMCOOKIES55 Major 350 Rep 1,376 Posts Drives: '17 M3 ZCP/ '16 ATS-V Join Date: Oct 2009 Location: Apex, NC iTrader: (3)	Gave her a nice spring correction. Attached Images
	Appreciate 0 Quote

04-13-2014, 12:07 AM	#797
tc535i Lieutenant Colonel 222 Rep 1,818 Posts Drives: 2007 335i, 2001 330i, 1995 M3 Join Date: Sep 2013 Location: West Los Angeles iTrader: (1)	Ordered er fmic, er cp with Tial q bov, and blacklines Bitch better appreciate it!
	Appreciate 0 Quote

04-13-2014, 12:32 AM	#799
Curt Private 24 Rep 95 Posts Drives: 2007 e92 335i Join Date: Apr 2012 Location: Bay Area iTrader: (0)	Had my CA Smog emissions test pass after 2 fails in a row
	Appreciate 0 Quote

04-13-2014, 01:47 AM	#801
maxxxboost Private 9 Rep 75 Posts Drives: e90 m3 Join Date: Dec 2013 Location: Vancouver iTrader: (0)	In the works to get a dual exhaust conversion on my 325i
	Appreciate 0 Quote

04-13-2014, 09:57 AM	#804
woggledog First Lieutenant 29 Rep 320 Posts Drives: 2015 F31 320D Sport Join Date: Jan 2014 Location: Surrey iTrader: (0)	Took he acoustic shield off the top of the engine and started cleaning. I think it's the first time someone has done this to this car. Took me 40 mins just to do around the oil filler port. I have a long road ahead of me, from what I can see :-) When I get back off my holiday, the inlet manifold and EGR are coming off for a clean. Am dreading that!
	Appreciate 0 Quote

04-13-2014, 11:14 AM	#805
dkay1 New Member 1 Rep 20 Posts Drives: 2007 BMW 335i Join Date: Jul 2013 Location: Washington State iTrader: (0)	Took off the roof rack, washed the car, drove with the windows down and music turned up...
	Appreciate 0 Quote

04-13-2014, 11:57 AM	#806
SCMalum Private First Class 9 Rep 147 Posts Drives: 2007 328XI Join Date: Apr 2014 Location: United States iTrader: (2)	Drove her to the shop to get a headlight fixed unfortunately : (.
	Appreciate 0 Quote

04-13-2014, 11:58 AM	#807
Mardio Brigadier General 197 Rep 3,211 Posts Drives: 2017 X5 Join Date: Jun 2006 Location: Nashville iTrader: (0)	Put gas in... again.
	Appreciate 0 Quote

04-13-2014, 01:03 PM	#808
bransan New Member 0 Rep 11 Posts Drives: 07' e90 w/6 speed manual Join Date: Apr 2014 Location: Park Rapids Minnesota iTrader: (0)	Washed/waxed and adjusted LF door, wasn't closing tight. Now if I could just find some replacement covers for the roof rack attachment locations.
	Appreciate 0 Quote

04-13-2014, 08:03 PM	#809
Nicky92 Fastest 335 on Earth 44 Rep 426 Posts Drives: 2008 335i Join Date: Feb 2014 Location: Levittown, NY iTrader: (0)	Washed it lol
	Appreciate 0 Quote

04-13-2014, 08:13 PM	#810
DF Major 239 Rep 1,255 Posts Drives: F23 Join Date: Sep 2013 Location: Sherman Oaks iTrader: (0)	put the dci on and cleaned and conditioned the leather
	Appreciate 0 Quote

04-14-2014, 06:19 AM	#812
Efthreeoh General 19164 Rep 19,710 Posts Drives: The E90 + Z4 Coupe & Z3 R'ster Join Date: May 2012 Location: Virginia iTrader: (0)	Pulled the drive shaft and replaced the center bearing.
	Appreciate 0 Quote