[Socket]

Originally Posted by t4orce

Nice interior wrap. Looks great.

It's a bit of an art form being able to remove trim gently and to wrap cleanly.

I wrapped my front lip of my E36 M3 and whilst it came out ok, was not easy balancing odd angles and heat gun...

Thanks have not tried wrapping but I'm pretty sure I'd sux at it lel

[Socket]

Originally Posted by EB89

Interior looks much better.

I had a go and wrapping mine and got the shits and gave up

Thanks EB

[Socket]

Originally Posted by bradsm87

Sucks about the BOV. Next softer is the black spring. It's a bugger here in Australia, you can't just go to the shop and try them all. The spring really is all it can be but it seems the white spring was not different enough.

Yep would be nice will get costly pretty fast if I gotta buy a heap of diff springs

[NeT335]

Looking good sock

Let me know when you ready for these

[Socket]

Originally Posted by GeTiNQ

Looking good sock

Let me know when you ready for these

Thanks for helping me fit em mate.. they look great

[NeT335]

Originally Posted by Socket

Thanks for helping me fit em mate.. they look great

No worries sock anytime

[Socket]

Was planning to a full interior conversion from beige to black but came across something a little different. A two tone theme with space grey trim

From what I can tell most peeps who go down this route colour, dye and paint, but Im planning to replace the parts instead.

Any help in spotting the bits and pieces to complete this project would be much appreciated.

Im going to pick up a blacked out dash this week and have window pillars on the way but need black, door trim, seat belts, carpets, center and rear consoles etc

Ill get all the bits and post progress pics

Pic 1 and 2 - Current beige interior
Pics 3 and 4 - Hopefully will look something like this when done

[NeT335]

Uhuh that's what you meant by surprise sock... Will look much better than how it is now.

Msg the m3 guy on eBay and ask for the glove box, seat belts and any of the trim that goes around the footwell areas (like where the bonnet release and shit is) and also the rear parcel shelf aswell if yours isn't black already

[Socket]

Originally Posted by GeTiNQ

Uhuh that's what you meant by surprise sock... Will look much better than how it is now.

Msg the m3 guy on eBay and ask for the glove box, seat belts and any of the trim that goes around the footwell areas (like where the bonnet release and shit is and also the rear parcel shelf aswell if yours isn't black already

Thanks bro.... hopefully finding all the parts wont be too hard

[NeT335]

Originally Posted by Socket

Thanks bro.... hopefully finding all the parts wont be too hard

It won't be hard just have to know where to look. Let me know how you go and what you need and I will help you find it brah

[NeT335]

The front and rear console you can get from peninsula bm in Mornington. Give them a call and tell them to make it cheaper. Also I'll give you my old handbrake since yours has a beige boot

http://www.ebay.com.au/ulk/itm/231728923202

[Socket]

Originally Posted by GeTiNQ

The front and rear console you can get from peninsula bm in Mornington. Give them a call and tell them to make it cheaper. Also I'll give you my old handbrake since yours has a beige boot

http://www.ebay.com.au/ulk/itm/231728923202

Nice one mate
Ill grab this from them

[NeT335]

Originally Posted by Socket

Nice one mate
Ill grab this from them

No worries bro go there in person and sus it out before you buy. Maybe try ask if they will do like part exchange with your old one... I doubt they but worth a try

[Socket]

MOD 33 - Custom tune by Trebila

Been running an OTS MHD tune since installing RBs. Finally got around to getting a custom tune to work with the new set up. Decided to go down the MHD piggy backed with the JB4 controlling the boost after chatting to Ink who is running the same set up. I sold my JB4 so I had to stump up for a new one, thanks to Justin supplying a new unit and getting it down to Melb in a couple of days. Installed and coded with help from Vince and Dave plus phone support from Scotty (thanks guys). Trebila supplied the custom tune (super friendly, fast and helpful). First startup threw a limp mode, but easily fixed with a reflash. Have not had a chance to give it a run yet, but aim to put it on the dyno in the next week or two. Will update soon.

[Carbonara]

No problem sox... note to everyone, make sure when fitting off a jb4 not to loop power around the hood strut haha

[_ink]

Originally Posted by Socket

MOD 33 - Custom tune by Trebila

Been running an OTS MHD tune since installing RBs. Finally got around to getting a custom tune to work with the new set up. Decided to go down the MHD piggy backed with the JB4 controlling the boost after chatting to Ink who is running the same set up. I sold my JB4 so I had to stump up for a new one, thanks to Justin supplying a new unit and getting it down to Melb in a couple of days. Installed and coded with help from Vince and Dave plus phone support from Scotty (thanks guys). Trebila supplied the custom tune (super friendly, fast and helpful). First startup threw a limp mode, but easily fixed with a reflash. Have not had a chance to give it a run yet, but aim to put it on the dyno in the next week or two. Will update soon.

Has it fixed any of the previous symptoms you were experiencing?

[EB89]

I like the direction you are going with the interior.

The two tone looks good and not dyeing I think is a good move.

[iliketurtl3s]

Numbers going to be huge

[E85 335]

Originally Posted by iliketurtl3s

Numbers going to be huge

My guess around 400rwhp with your mods and tune. Great build..

[Socket]

Originally Posted by DAT335

My guess around 400rwhp with your mods and tune. Great build..

With the exception of the turbos and meth we are close to running the same mods DAT. I'd be pretty happy with these numbers. What are you hitting with your set up?

[bmwheath]

Originally Posted by Socket

MOD 33 - Custom tune by Trebila

Been running an OTS MHD tune since installing RBs. Finally got around to getting a custom tune to work with the new set up. Decided to go down the MHD piggy backed with the JB4 controlling the boost after chatting to Ink who is running the same set up. I sold my JB4 so I had to stump up for a new one, thanks to Justin supplying a new unit and getting it down to Melb in a couple of days. Installed and coded with help from Vince and Dave plus phone support from Scotty (thanks guys). Trebila supplied the custom tune (super friendly, fast and helpful). First startup threw a limp mode, but easily fixed with a reflash. Have not had a chance to give it a run yet, but aim to put it on the dyno in the next week or two. Will update soon.

Nice one Socks. Im going the JB4 MHD stack as well, just waiting on these dam new turbos to arrive... waiting.... waiting.... waiting....

[bmwheath]

Originally Posted by Socket

With the exception of the turbos and meth we are close to running the same mods DAT. I'd be pretty happy with these numbers. What are you hitting with your set up?

You will be well over 400rwhp with RB's Sock! I was over 400rwhp with the stock turbo's with just FBO (with stock inlets)