N54 Public XDF Repository

WedgePerformance · 09-15-2016, 04:49 PM

Quote:

Originally Posted by CarAbuser

Will the tables for enabling exhaust burble be added into the XDFs?
So I can change duration without using the flash time options in MHD.

No, the tables will remain private.

jyamona · 09-22-2016, 02:45 PM

Quote:

Originally Posted by CarAbuser

Will the tables for enabling exhaust burble be added into the XDFs?
So I can change duration without using the flash time options in MHD.

No, I found them for MHD as an exclusive feature, sorry

CarAbuser · 09-22-2016, 06:05 PM

Quote:

Originally Posted by jyamona

No, I found them for MHD as an exclusive feature, sorry

Perfectly understandable. I just like to keep as many things set in the BIN file as I can since MHD occasionally has problems with the flash time options not correctly applying.

jyamona · 12-07-2016, 01:04 PM

XDF Update!

The Fuel (Start) table has been added Click here to enlarge So go enjoy no more cold start E85 issues!

Also, very big thanks to MHD Tuning for adding ALL missing table axis. If anyone spots an issue, please comment.

Thanks!

clay6316 · 03-15-2017, 12:14 PM

Dear all
I am a new tuner in the tunerpro ,i want to tune my 335i,i have elm327 ,but i don't connect tunerpro, and i don't know to load the car Bin,can give me some support?
thank you so much

WedgePerformance · 03-16-2017, 02:42 AM

Quote:

Originally Posted by clay6316

Dear all
I am a new tuner in the tunerpro ,i want to tune my 335i,i have elm327 ,but i don't connect tunerpro, and i don't know to load the car Bin,can give me some support?
thank you so much

You cannot use TunerPro to flash the car. You'll need MHD Flasher and you can use TunerPro to modify the bin and flash via MHD.

clay6316 · 03-17-2017, 12:58 AM

Quote:

Originally Posted by WedgePerformance

You cannot use TunerPro to flash the car. You'll need MHD Flasher and you can use TunerPro to modify the bin and flash via MHD.

so~frist i need use MHD read my car Bin file,
then use Tunerpro to modify the Bin file ,
last ues MHD to flash my car?

thank you so much

WedgePerformance · 03-17-2017, 01:54 AM

Quote:

Originally Posted by clay6316

so~frist i need use MHD read my car Bin file,
then use Tunerpro to modify the Bin file ,
last ues MHD to flash my car?

thank you so much

Yes

But I also recommend just paying the $49 for a stage 1 or 2 map pack and flash your car with a decent MHD/WedgePerformance map.

clay6316 · 03-17-2017, 11:14 AM

Quote:

Originally Posted by WedgePerformance

Yes

But I also recommend just paying the $49 for a stage 1 or 2 map pack and flash your car with a decent MHD/WedgePerformance map.

Dear sir thank you so much
but i Want to learn about tuning,and where can Let me learn to tuning know how?I am very interested in it

jyamona · 03-21-2017, 02:09 PM

Quote:

Originally Posted by clay6316

Dear sir thank you so much
but i Want to learn about tuning,and where can Let me learn to tuning know how?I am very interested in it

Please keep this type of discussion out of the XDF thread. Thank you!

xQx · 01-17-2018, 09:58 PM

Does anyone have a xdf file which defines the Toggles for Diagnostic codes 29F4 and 29F5 in the IJE0S bin file?

(or can link instructions of how to define them in tunerPro?)

I'm Australian, so we're legally allowed to code these out, but since they're not in the XDF file, I can't.

Thanks,
Will

Ballistic · 01-18-2018, 04:04 AM

Thank you for all the work and making it publicly available.

however;

Quote:

Originally Posted by WedgePerformance

converting them from metric to standard values

I'm sorry... YOU DID WHAT!?

Your "standard" is NOT A STANDARD!

Stop using retard numbering. Its 2018 ffs!

feuer · 01-18-2018, 09:00 AM

Quote:

Originally Posted by Ballistic

I'm sorry... YOU DID WHAT!?

Your "standard" is NOT A STANDARD!

very well said!

veer90 · 06-20-2018, 10:44 AM

The github link in post 1 always has all the most up to date XDFs right?

Was looking at the IJE0S XDF and noticed the last commit was a year ago, just wanted to double check. Thanks.

studio54 · 07-22-2019, 09:35 AM

Thanks for this !

Anyone knows the difference between torque request high & low tables for a 6 MT ?

Is "low" is for when DTC is pressed once ? and high for the rest of the time?

svvag2000 · 10-04-2019, 02:10 AM

good day
great jobe

Gixfighter · 01-06-2020, 03:43 AM

I've been struggling to get the exhaust flap to stay closed when car is idle or low speed driving. I've tried many settings for static exhaust flap position, and also torque request % map for 0 and first gear but it won't stay closed.
I've tried MHD and that keeps the valve closed during idle so the valve works fine.
I'm thinking the problem might be the '1' setting for the static exhaust flap postion, according to the comment in the XDF info, 1 should be closed. can anyone confirm this is the case? Maybe i need to input a different number there, as for many other toggles?

paolotonzini · 02-03-2020, 10:10 AM

Is there an xdf for e9x n55 that will allow modifying fuel start and idle setpoints for cold start idle changes?

335ir1r6 · 02-04-2020, 04:12 AM

any xdf file for tcu with gke195 family ?

6ixSpd · 02-05-2020, 04:29 PM

Is there any way to determine which lines need to be modified to disable cold start and CEL for carless DP on a 2011 N55 xdf?

B6T · 04-01-2020, 08:27 AM

Quote:

Originally Posted by Gixfighter

I've been struggling to get the exhaust flap to stay closed when car is idle or low speed driving. I've tried many settings for static exhaust flap position, and also torque request % map for 0 and first gear but it won't stay closed.
I've tried MHD and that keeps the valve closed during idle so the valve works fine.
I'm thinking the problem might be the '1' setting for the static exhaust flap postion, according to the comment in the XDF info, 1 should be closed. can anyone confirm this is the case? Maybe i need to input a different number there, as for many other toggles?

Had a similar problem with my E82 a while back. Turned out to be a hole in the vacuum that runs from the brake booster tube under the hood.

6ixSpd · 08-05-2020, 04:23 PM

Quote:

Originally Posted by 6ixSpd

Is there any way to determine which lines need to be modified to disable cold start and CEL for carless DP on a 2011 N55 xdf?

Anyone? Looking to do the same on a 2010 N54 as well. I don't want to tune the car for power or any Stage 2, just disable the CEL for the catless DPs.

12-07-2016, 01:04 PM	#70
jyamona Private 177 Rep 98 Posts Drives: 2010 135i Join Date: Oct 2013 Location: Northeast PA iTrader: (0)	XDF Update! The Fuel (Start) table has been added Click here to enlarge So go enjoy no more cold start E85 issues! Also, very big thanks to MHD Tuning for adding ALL missing table axis. If anyone spots an issue, please comment. Thanks! __________________ Enjoying the new tables discovered and the XDF progress made? if you'd like. Every bit is appreciated!
	Appreciate 3 WedgePerformance1340.50 MHD Tuning1984.50 JValenzSD10.50 Quote

03-15-2017, 12:14 PM	#71
clay6316 Registered 2 Rep 3 Posts Drives: E82 135i Join Date: Feb 2017 Location: taiwan iTrader: (0)	Dear all I am a new tuner in the tunerpro ,i want to tune my 335i,i have elm327 ,but i don't connect tunerpro, and i don't know to load the car Bin,can give me some support? thank you so much
	Appreciate 0 Quote

01-17-2018, 09:58 PM	#77
xQx General 906 Rep 1,004 Posts Drives: 2008 BMW 135i (E88 N54 6AT) Join Date: Aug 2016 Location: Sunshine Coast QLD Australia iTrader: (0)	Does anyone have a xdf file which defines the Toggles for Diagnostic codes 29F4 and 29F5 in the IJE0S bin file? (or can link instructions of how to define them in tunerPro?) I'm Australian, so we're legally allowed to code these out, but since they're not in the XDF file, I can't. Thanks, Will
	Appreciate 0 Quote

06-20-2018, 10:44 AM	#80
veer90 Private 28 Rep 92 Posts Drives: . Join Date: Jan 2016 Location: . iTrader: (1)	The github link in post 1 always has all the most up to date XDFs right? Was looking at the IJE0S XDF and noticed the last commit was a year ago, just wanted to double check. Thanks.
	Appreciate 0 Quote

07-22-2019, 09:35 AM	#81
studio54 Captain 205 Rep 714 Posts Drives: n54 Join Date: Feb 2017 Location: belgium iTrader: (0)	Thanks for this ! Anyone knows the difference between torque request high & low tables for a 6 MT ? Is "low" is for when DTC is pressed once ? and high for the rest of the time?
	Appreciate 0 Quote

10-04-2019, 02:10 AM	#82
svvag2000 Registered 0 Rep 1 Posts Drives: BMW M3 Join Date: Oct 2019 Location: Russia iTrader: (0)	good day great jobe Last edited by svvag2000; 10-04-2019 at 11:43 AM..
	Appreciate 0 Quote

01-06-2020, 03:43 AM	#83
Gixfighter New Member 3 Rep 21 Posts Drives: E91 2006 335i, M-sport Join Date: Mar 2018 Location: Netherlands iTrader: (0)	I've been struggling to get the exhaust flap to stay closed when car is idle or low speed driving. I've tried many settings for static exhaust flap position, and also torque request % map for 0 and first gear but it won't stay closed. I've tried MHD and that keeps the valve closed during idle so the valve works fine. I'm thinking the problem might be the '1' setting for the static exhaust flap postion, according to the comment in the XDF info, 1 should be closed. can anyone confirm this is the case? Maybe i need to input a different number there, as for many other toggles?
	Appreciate 0 Quote

02-03-2020, 10:10 AM	#84
paolotonzini New Member 0 Rep 18 Posts Drives: 335i Join Date: Jul 2018 Location: fl iTrader: (0)	Is there an xdf for e9x n55 that will allow modifying fuel start and idle setpoints for cold start idle changes?
	Appreciate 0 Quote

02-04-2020, 04:12 AM	#85
335ir1r6 New Member 0 Rep 9 Posts Drives: 335i Join Date: Jan 2019 Location: bulgaria iTrader: (0)	any xdf file for tcu with gke195 family ?
	Appreciate 0 Quote

02-05-2020, 04:29 PM	#86
6ixSpd Save the manuals! 6066 Rep 6,763 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	Is there any way to determine which lines need to be modified to disable cold start and CEL for carless DP on a 2011 N55 xdf?
	Appreciate 0 Quote