|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
My Build Story In Detail (Dat-335)
|
|
02-11-2016, 02:47 PM | #68 |
First Lieutenant
56
Rep 330
Posts |
Not sure why they jumped so much. Guessing because of demand. They ordered 10 sets and we're all sold straight away. I am dying to get it back and start re-tuning and dialing it in.
|
Appreciate
0
|
02-12-2016, 09:25 PM | #69 |
First Lieutenant
56
Rep 330
Posts |
So I decided to buy the Fuel-it Port Injection Kit (Bronze) from Steve cause they have an awesome buy back program at present. If you upgrade to PI and Stage 3 LPFP you get $400usd cahsback and cause I have the original LPFP you get another $300usd... Works out to be $1000aud off. The kit has been sent so once it arrives I will take some pics for everyone so they can see the quality of the product. Cant wait to run 100% E85 and pushing these pure stage 2 turbos to 30psi....
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
02-16-2016, 03:25 AM | #70 |
First Lieutenant
56
Rep 330
Posts |
Just a quick update, got the New Bluetooth Rev 3 JB4 connection today Plus upgrading the chip inside the JB4 to the Anti-Lag chip for the Port Injection by Fuel-It. I pretty sure the Port Injection Arrives tomorrow and Thursday so I take some pics once it does for everyone to see the workmanship of the rail, lines and injectors.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
02-17-2016, 04:14 AM | #71 |
First Lieutenant
56
Rep 330
Posts |
New arrival of Fuel-It Port Injection.. Looking Forward to adding this to the build.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
02-18-2016, 12:13 AM | #72 |
Lieutenant General
4665
Rep 11,950
Posts |
Niceeeeeeeee
|
Appreciate
0
|
02-23-2016, 06:46 AM | #73 |
First Lieutenant
56
Rep 330
Posts |
So an update. Pistons are still coming and wont be here till the 7th of March before rebuild starts. Had to purchase a VRS kit which was $900, Head gasket and doing all the timing gear at the same time aswell which was another $600 plus head bolts.
These pistons are killing me in the time they are taking but hopefully being patient it will be well worth it in the long run.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
02-23-2016, 07:43 PM | #74 | |
Captain
75
Rep 853
Posts |
Quote:
Good things comes to those who wait lol |
|
Appreciate
0
|
02-24-2016, 04:28 AM | #75 |
First Lieutenant
56
Rep 330
Posts |
|
Appreciate
0
|
03-17-2016, 04:13 AM | #76 |
First Lieutenant
56
Rep 330
Posts |
So yesterday I finally got my forge pistons from pure performance motorsports after a 10 week wait. The product is awesome but are hopeless to keep to a time frame and ignore the customer if trying to find out what is going on with your order. Never again will I deal with them. I got them only to find out that the pistons are 84.5mm dimensions when the stock pistons are 83.92mm so now I have to get the block bored out to the correct size which is another couple of days and a extra $440 for the block. Compression should be slightly higher which should be good. So hopefully things will be smooth sailing from here on out.
Last edited by E85 335; 03-17-2016 at 06:07 AM.. |
Appreciate
0
|
03-17-2016, 05:57 AM | #78 | |
Lieutenant General
4665
Rep 11,950
Posts |
Quote:
|
|
Appreciate
0
|
03-17-2016, 06:47 AM | #79 | |
Lieutenant Colonel
598
Rep 1,693
Posts |
Quote:
|
|
Appreciate
0
|
03-17-2016, 07:21 AM | #80 |
First Lieutenant
56
Rep 330
Posts |
Well they didnt tell me or i would of had it done ages ago. They said that it would just wack straight in..
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
03-29-2016, 05:37 PM | #82 |
First Lieutenant
56
Rep 330
Posts |
So a quick update. The motor is completely stripped down. The block has been sent to precision engineering to get bored out which will take around 2 days if all goes to plan. Next week the engine should be ready for the complete rebuild from scratch. The finish line is in site. lol
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
03-29-2016, 07:59 PM | #83 |
Brigadier General
544
Rep 3,127
Posts
Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW
|
One day... You will drive your car
|
Appreciate
0
|
03-29-2016, 10:08 PM | #84 |
Major General
907
Rep 6,285
Posts |
|
Appreciate
0
|
03-30-2016, 12:23 AM | #85 | |
Lieutenant General
4665
Rep 11,950
Posts |
Quote:
|
|
Appreciate
0
|
03-30-2016, 04:45 AM | #86 | |
First Lieutenant
56
Rep 330
Posts |
Quote:
Hahaha it gets a bit like that. Since its all apart everything to tell you the truth is spot on. I was surprise that nothing was worn out internally which is a huge plus but I am replacing all the bottom end and big end bearings just to be sure. My mechanic is a whizz at doing rebuilds on these engines plus I have replaced virtually everything that could fail. It will be a brand new engine virtually. I also saw that the guys from Nizpro have a new transmission setup for around $6000 which will handle massive power. Might have to put that on the wish list lol...
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
|
Appreciate
0
|
03-30-2016, 05:19 AM | #87 |
Jedi samurai ninja turtle
631
Rep 3,021
Posts
Drives: X3 M40i 2018
Join Date: May 2012
Location: Sydney, Australia
|
Did your mechanic check the camshaft ledges? How were they holding up?
|
Appreciate
0
|
03-30-2016, 05:22 AM | #88 |
First Lieutenant
56
Rep 330
Posts |
Yeah they were like new. I suggested the same to him to check them out but yeah no wear at all.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
|
Appreciate
0
|
Bookmarks |
|
|