|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Eonon GA6165F review
|
|
05-26-2019, 09:57 AM | #67 | |
Second Lieutenant
4
Rep 229
Posts |
Quote:
|
|
Appreciate
0
|
06-18-2019, 07:45 PM | #68 |
New Member
2
Rep 12
Posts |
Anyone have issues with their aircon not working after install? sounds as though the blower is running however nothing is discharging from the vents in the front of the car, only hot air from the back seat. even when AC is on full. thanks in advance!
|
Appreciate
0
|
06-18-2019, 07:57 PM | #69 | |
Private First Class
7
Rep 155
Posts |
Quote:
Try unplugging and replugging the multi plug at the back of the aircon control panel. |
|
Appreciate
0
|
09-21-2020, 07:39 PM | #70 |
New Member
1
Rep 11
Posts |
Hi Everyone, I know that this post is already quiet for a while but since you guys are owners of this kind Android Units maybe you can help me.
I recently bought one in AliExpress the delivery for Portugal was great in 3 days I had the Radio here with free shipping so wonderful. However since I installed I had a couple of issue's and I had not being able to use the Radio yet: Current main Issue - After everything is installed, and you turn on the radio... and you start driving after +/- 5 minutes of usage the Android Canbus Decoder starts beeping and won't stop. You can turn off the radio, turn off the car, remove the car keys and lock the car... but the beep sounds won't stop at all. The only way to stop it is really by unplugging the decoder box and the cables from the android unit. I used Carly ODB to look for errors while using the android radio, and then I did the same test with the BMW radio. No problems found while using the BMW built-in system, however, when swapped to the android radio, a "battery module error" comes up on Carly So the issue is really related to the radio itself, now what I would like to understand is: - Is this error something common with this kind of Android Radio? Any Workaround? - Is the issue coming from the Android Can Bus Decoder? Do I need to swap it? - Do we need to any change on the battery module to make it work? Help would be really appreciated Thank you all! |
Appreciate
0
|
Bookmarks |
|
|