BB Fabrication Product Line Intro

klipseracer · 03-19-2010, 02:34 PM

I can personallly vouch for there being a new product being announced in the next few weeks by BB fab. Its a new product and some pretty cool ideas are being tossed around that can allow the flexibility of being fully cattless but still be able to easily pass smog without going through great lengths to replace parts with stock ones. I will let everyone know in about 2 weeks what my analysis is and I'll throw my car back on the dyno jet. Yes I have a baseline, it was taken with only a stett cai. Which by the way, I'm going to be replacing with a new intake system that has not been announced yet. Because of the way our turbos work, they don't pull exactly the same at all times, the STETT cai may in fact be reducing the power it is capable of making and even in some cases losing power. There is a solution coming for that also.

EDIT: The intake solution i'm speaking of is not from BB however, but from BSH, the large metal fabrication company in arizona that makes the only can that is on AR designs level or possibly even slightly above it. You can't go wrong with a dipstick

lpphreakx06 · 03-19-2010, 05:31 PM

Since 3 inch?

itsbrokeagain · 03-19-2010, 08:58 PM

Quote:

Originally Posted by darklocust

So is BB going to fix this issue as well or is it a non-issue for the bung to be in the "wrong" place? Is the o2 long enough?

yup 02 sensor location has been fixed. Not an issue with it being long enough, just welded at the wrong angle causing clearance issues with the other pipe. It since has been fixed

UAP1 · 03-19-2010, 10:17 PM

Subscribing. Let us know pricing....

UAP1 · 04-10-2010, 04:26 PM

Please PM pricing of DP's.

Thanks!
B

GGreek5 · 04-10-2010, 05:16 PM

Just had these installed guys and they fit great. No issues and they perform great also. I'll have a write up soon with some pics.

UAP1 · 04-10-2010, 10:14 PM

Quote:

Originally Posted by GGreek5

Just had these installed guys and they fit great. No issues and they perform great also. I'll have a write up soon with some pics.

Where can we find pricing?

PS: Look forward to the review!

alextremo · 04-10-2010, 10:38 PM

Quote:

Originally Posted by GGreek5

Just had these installed guys and they fit great. No issues and they perform great also. I'll have a write up soon with some pics.

you mind sharing who you went to for the install?

GGreek5 · 04-10-2010, 11:19 PM

BPG did the install. They installed my AR dps last year, and do all the work on my car. Shoot bb fab a pm on n54 tech for pricing.

Sal@AUTOcouture · 04-12-2010, 12:59 AM

Finalizing pricing. GB (catless pipes for i models and meth elbows) will be up shortly

Funkmob · 04-12-2010, 02:14 PM

Quote:

Originally Posted by Sal@AUTOcouture

Finalizing pricing. GB (catless pipes for i models and meth elbows) will be up shortly

Cool , Keep us posted. Im in for it, i really need a set of downpipes.
Can you pm me a shipping quote to Belgium?

Presidio335xi · 04-13-2010, 01:06 AM

Xi fitment done?

D.B.S · 04-15-2010, 10:57 AM

XI fitment? Are these Catted or Catless? Would be nice if both would be offered, it sucks that UR is the only supplier of Catted DP's for the XI's...

jeffmas1587 · 04-15-2010, 04:26 PM

Maybe not the right place for this, but does anyone make a full 3 inch turbo back exhaust system w/ or w/o cats?

WCM3 · 04-15-2010, 05:06 PM

Quote:

Originally Posted by jeffmas1587

Maybe not the right place for this, but does anyone make a full 3 inch turbo back exhaust system w/ or w/o cats?

I'm pretty sure nobody makes a turbo back exhaust. You'll either have to go with AR Design/BB Fabrication/Other downpipes, and then get a downpipes back exhaust like AMS/AE Performance/BMW Performance..

3002 tii · 04-15-2010, 05:28 PM

wow... looks awesome.

assuming these are custom made, any chance you guys will design headers for the n52? i bet you'd get alot of interest from the 1/3/z guys!

jeffmas1587 · 04-15-2010, 05:52 PM

That's really messed up. I think any company that can make a high quality light weight TBE would make a killing. Who wants to mix and match exhaust systems?

Quote:

Originally Posted by WCM3

I'm pretty sure nobody makes a turbo back exhaust. You'll either have to go with AR Design/BB Fabrication/Other downpipes, and then get a downpipes back exhaust like AMS/AE Performance/BMW Performance..

WCM3 · 04-16-2010, 12:54 PM

Quote:

Originally Posted by jeffmas1587

That's really messed up. I think any company that can make a high quality light weight TBE would make a killing. Who wants to mix and match exhaust systems?

It's true. Honestly I thought AMS was going to make downpipes. But I think they just tried AR Designs/BB and were happy. Didn't see a need to make additional downpipes for the N54..

ar design · 04-16-2010, 02:52 PM

Quote:

Originally Posted by WCM3

I think they just tried AR Designs/BB and were happy. Didn't see a need to make additional downpipes for the N54..

They are not one and the same, to be clear. Not even close.

03-19-2010, 02:34 PM	#67
klipseracer Banned 228 Rep 3,012 Posts Drives: 2007 E90 335i, 05 E46 330i Join Date: Aug 2009 Location: Arizona iTrader: (27) Garage List 2007 335i [0.00] 2005 330i [0.00]	I can personallly vouch for there being a new product being announced in the next few weeks by BB fab. Its a new product and some pretty cool ideas are being tossed around that can allow the flexibility of being fully cattless but still be able to easily pass smog without going through great lengths to replace parts with stock ones. I will let everyone know in about 2 weeks what my analysis is and I'll throw my car back on the dyno jet. Yes I have a baseline, it was taken with only a stett cai. Which by the way, I'm going to be replacing with a new intake system that has not been announced yet. Because of the way our turbos work, they don't pull exactly the same at all times, the STETT cai may in fact be reducing the power it is capable of making and even in some cases losing power. There is a solution coming for that also. EDIT: The intake solution i'm speaking of is not from BB however, but from BSH, the large metal fabrication company in arizona that makes the only can that is on AR designs level or possibly even slightly above it. You can't go wrong with a dipstick
	Appreciate 0 Quote

03-19-2010, 05:31 PM	#68
lpphreakx06 Professional Moose Racer 327 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	Since 3 inch? __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0 Quote

03-19-2010, 10:17 PM	#70
UAP1 www.UltimateAutoPortal.co m 63 Rep 556 Posts Drives: 2007 BMW 335i. Few mods. Join Date: Mar 2010 Location: Texas iTrader: (3)	Subscribing. Let us know pricing....
	Appreciate 0 Quote

04-10-2010, 04:26 PM	#71
UAP1 www.UltimateAutoPortal.co m 63 Rep 556 Posts Drives: 2007 BMW 335i. Few mods. Join Date: Mar 2010 Location: Texas iTrader: (3)	Please PM pricing of DP's. Thanks! B
	Appreciate 0 Quote

04-10-2010, 05:16 PM	#72
GGreek5 Olimpiakos 93 Rep 1,426 Posts Drives: M3 Join Date: Apr 2008 Location: Mass iTrader: (10)	Just had these installed guys and they fit great. No issues and they perform great also. I'll have a write up soon with some pics.
	Appreciate 0 Quote

04-10-2010, 11:19 PM	#75
GGreek5 Olimpiakos 93 Rep 1,426 Posts Drives: M3 Join Date: Apr 2008 Location: Mass iTrader: (10)	BPG did the install. They installed my AR dps last year, and do all the work on my car. Shoot bb fab a pm on n54 tech for pricing.
	Appreciate 0 Quote

04-12-2010, 12:59 AM	#76
Sal@AUTOcouture 746 Rep 10,100 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	Finalizing pricing. GB (catless pipes for i models and meth elbows) will be up shortly
	Appreciate 0 Quote

04-13-2010, 01:06 AM	#78
Presidio335xi Lieutenant 22 Rep 414 Posts Drives: 335xi coupe Join Date: Oct 2007 Location: San Francisco iTrader: (0)	Xi fitment done? __________________ 2017 F82
	Appreciate 0 Quote

04-15-2010, 10:57 AM	#79
D.B.S Lieutenant Colonel 30 Rep 1,748 Posts Drives: '11 X5 35i / '13 S5 Join Date: Jun 2009 Location: Deployed to Kuwait iTrader: (2)	XI fitment? Are these Catted or Catless? Would be nice if both would be offered, it sucks that UR is the only supplier of Catted DP's for the XI's... __________________ BMW X5 35i: Boopie Exhaust & Intercooler, K&N Drop in Filter, JB3 (3+ psi) 2013 Dodge Challenger R/T: CAI, Catch Can, Custom Exhaust, Headers, 87MM Throttle Body, Diablo Custom 93 OCT Tune
	Appreciate 0 Quote

04-15-2010, 04:26 PM	#80
jeffmas1587 New Member 0 Rep 22 Posts Drives: '07 335i Join Date: Apr 2010 Location: DFW iTrader: (0)	Maybe not the right place for this, but does anyone make a full 3 inch turbo back exhaust system w/ or w/o cats?
	Appreciate 0 Quote

04-15-2010, 05:28 PM	#82
3002 tii Lieutenant General 2492 Rep 12,698 Posts Drives: Z4 M, X5, GX460 Join Date: Apr 2008 Location: CT iTrader: (100) Garage List E86 Z4 M [10.00] F15 X5 xDrive35i [9.17] F10 550i (Retired) [9.17] E85 Z4 M (Retired) [9.41] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.56] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [8.93]	wow... looks awesome. assuming these are custom made, any chance you guys will design headers for the n52? i bet you'd get alot of interest from the 1/3/z guys! __________________ Follow for latest mods
	Appreciate 0 Quote