Hmmm...whats this?

Donald-335i · 05-23-2010, 10:37 AM

nice setup!! i'm going to be doing my install towards july/august can't wait!

cn555ic · 05-23-2010, 08:13 PM

Here is a video of my purge in action!

Here is a pic of the bottle heater installed! All there needs to be done after to get it functionable, is wire up the solenoid

Shiv I need your HELP!!

When you get back from vacation please have the wiring to the Procede info for me!

scottp999 · 05-23-2010, 08:24 PM

Great progress! Just about there.

klipseracer · 05-23-2010, 08:36 PM

Quote:

Originally Posted by badass335

What are you going into now?

My new ride is a 26 yr old korean english teacher. Oh and I'm also buying a house with the money

Terrance28 · 05-23-2010, 10:15 PM

Hey CN where did you ground your solenoid(meth and nitrous)?

cn555ic · 05-23-2010, 11:14 PM

Quote:

Originally Posted by Terrance28

Hey CN where did you ground your solenoid(meth and nitrous)?

Havent wired that part up just yet...waiting on Shiv to let me know how to wire it up to Procede..

m I am using the Procede as my nitrous controller for activation..

cn555ic · 05-23-2010, 11:15 PM

Quote:

Originally Posted by scottp999

Great progress! Just about there.

Yeah almost there! Already month and half getting it set up and its still not working, but its neat as hell though!

frozendevl · 05-23-2010, 11:48 PM

Looks great so far, can't wait for the finale!

cn555ic · 05-24-2010, 06:09 PM

Quote:

Originally Posted by Terrance28

Hey CN where did you ground your solenoid(meth and nitrous)?

I have the purge solenoid grounded here...I think I am also going to ground the other meth solenoid and the nitrous solenoid here also...Here is the location of where I am going to ground it later..I think from looking at your pics of your install, your using this location for your mounting of the nitrous solenoid!

Terrance28 · 05-24-2010, 07:38 PM

Thats a good ground. I(dumbass) recently just snapped the bolt off the held that headlight box that you have your relay mounted on so I had to ground it there in that location. Its just temporary until I can figure out how to fix it. I actually have my nitrous and meth solenoid grounded on that nut on the strut tower.

cn555ic · 06-06-2010, 11:18 PM

In nitrous mode (future use 1=100%), the roadspeed output doubles as an intelligent window switch output. This provides the ground to the nitrous relay when the engine conditions are met. The power to the relay is supplied by either a switch or (in my case) a steering wheel mounted button. When both conditions are met, the relay kicks on and drives both the nitrous solenoid and the secondary meth solenoid. And that same 12v activation signal is also fed back into the mapswitch input (what the remote relay box used to plug into), forcing the Procede to use Map2 which is mapped for nitrous. Pretty neat stuff. I just haven't gotten around to writing a schematic yet. Been so busy with everything else. But it's on the top of my list when I get back from vacation in a week.

Shiv

Anyone can make sense of this with wiring?

itsbrokeagain · 06-07-2010, 12:23 AM

Quote:

Originally Posted by cn555ic

FBIS...what is this piece thats on the nitrous bottle neck thats covered in a green cap used for? The little plastic cover on mine is cracked in half, it came like that shipped...Wanted to know if that cap is necessarry...

if im not mistaken that is where you attach the blowdown pipe incase the pressure in the tank exceeds the maximum. It will rupture the seal and vent the gas outside the vehicle instead of keeping it inside the vehicle, causing a possible explosion or causing a fatality due to inhalation.

Technically with a trunk mounted bottle it can be kept closed like that, but hatchback or cabin mounted locations they require you to drill a hole in the floor and run the pipe through to the outside.

Malaka1 · 06-07-2010, 02:36 AM

Post up some vids of the car doing some pulls! How does it feel, are you still on the stock clutch?

Terrance28 · 06-07-2010, 03:12 AM

He hasn't have it hooked up all the way yet, he is still waiting on shiv.

AMASIAN · 08-04-2010, 04:59 PM

subscribing

Mr. 5 · 08-04-2010, 05:43 PM

Why did this thread stop?
What happened with this?

It seems like everyone was nitrous happy for a while but I haven't seen anything lately.

Former_Boosted_IS · 08-05-2010, 06:15 AM

Quote:

Originally Posted by Mr. 5

Why did this thread stop?
What happened with this?

It seems like everyone was nitrous happy for a while but I haven't seen anything lately.

I think they are waiting for Shiv's nitrous integration. If the Procede can dial in the correct AFRs, then there is no reason any aftermarket nitrous controller couldn't be used.

cn555ic · 08-05-2010, 07:56 AM

Yep still waiting on Shiv to give me the wiring schematics to the Procede...Hopefully it will come out soon...
The wait is kind of torture because I have been waiting for over 2 months for the wiring to the Procede, but I guess Shiv wants everything to be perfect before he introduces to the public nitrous...

Former_Boosted_IS · 08-05-2010, 08:04 AM

Quote:

Originally Posted by cn555ic

Yep still waiting on Shiv to give me the wiring schematics to the Procede...Hopefully it will come out soon...
The wait is kind of torture because I have been waiting for over 2 months for the wiring to the Procede, but I guess Shiv wants everything to be perfect before he introduces to the public nitrous...

Buy an aftermarket controller and sell it later!

cn555ic · 08-05-2010, 09:16 AM

Lol. I wil just wait on Shiv. Don't want to spend any more money on nitrous system.

05-23-2010, 10:37 AM	#67
Donald-335i Banned 202 Rep 3,588 Posts Drives: The Hoes Crazy! Join Date: Nov 2008 Location: Central NJ iTrader: (13)	nice setup!! i'm going to be doing my install towards july/august can't wait!
	Appreciate 0 Quote

05-23-2010, 08:13 PM	#68
cn555ic 464 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Here is a video of my purge in action! Here is a pic of the bottle heater installed! All there needs to be done after to get it functionable, is wire up the solenoid Shiv I need your HELP!! When you get back from vacation please have the wiring to the Procede info for me! Attached Images Last edited by cn555ic; 05-23-2010 at 08:43 PM..
	Appreciate 0 Quote

05-23-2010, 08:24 PM	#69
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Great progress! Just about there.
	Appreciate 0 Quote

05-23-2010, 10:15 PM	#71
Terrance28 Brigadier General 114 Rep 3,334 Posts Drives: Crimson Red E92 Join Date: Nov 2007 Location: Killeen, TX iTrader: (17)	Hey CN where did you ground your solenoid(meth and nitrous)? __________________ Mods list got too long, lets just say more than enough.
	Appreciate 0 Quote

05-23-2010, 11:48 PM	#74
frozendevl Private 5 Rep 98 Posts Drives: 2015 X5 35ix Join Date: Apr 2010 Location: Chicago iTrader: (0)	Looks great so far, can't wait for the finale!
	Appreciate 0 Quote

05-24-2010, 07:38 PM	#76
Terrance28 Brigadier General 114 Rep 3,334 Posts Drives: Crimson Red E92 Join Date: Nov 2007 Location: Killeen, TX iTrader: (17)	Thats a good ground. I(dumbass) recently just snapped the bolt off the held that headlight box that you have your relay mounted on so I had to ground it there in that location. Its just temporary until I can figure out how to fix it. I actually have my nitrous and meth solenoid grounded on that nut on the strut tower. Attached Images __________________ Mods list got too long, lets just say more than enough.
	Appreciate 0 Quote

06-06-2010, 11:18 PM	#77
cn555ic 464 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	In nitrous mode (future use 1=100%), the roadspeed output doubles as an intelligent window switch output. This provides the ground to the nitrous relay when the engine conditions are met. The power to the relay is supplied by either a switch or (in my case) a steering wheel mounted button. When both conditions are met, the relay kicks on and drives both the nitrous solenoid and the secondary meth solenoid. And that same 12v activation signal is also fed back into the mapswitch input (what the remote relay box used to plug into), forcing the Procede to use Map2 which is mapped for nitrous. Pretty neat stuff. I just haven't gotten around to writing a schematic yet. Been so busy with everything else. But it's on the top of my list when I get back from vacation in a week. Shiv Anyone can make sense of this with wiring?
	Appreciate 0 Quote

06-07-2010, 02:36 AM	#79
Malaka1 General 107 Rep 919 Posts Drives: F30 335i 6MT Black Join Date: Jun 2009 Location: Clearwater, FL iTrader: (6)	Post up some vids of the car doing some pulls! How does it feel, are you still on the stock clutch?
	Appreciate 0 Quote

06-07-2010, 03:12 AM	#80
Terrance28 Brigadier General 114 Rep 3,334 Posts Drives: Crimson Red E92 Join Date: Nov 2007 Location: Killeen, TX iTrader: (17)	He hasn't have it hooked up all the way yet, he is still waiting on shiv. __________________ Mods list got too long, lets just say more than enough.
	Appreciate 0 Quote

08-04-2010, 04:59 PM	#81
AMASIAN Banned 46 Rep 598 Posts Drives: 335i Vert Join Date: Jul 2010 Location: Rochester, NY iTrader: (8)	subscribing
	Appreciate 0 Quote

08-04-2010, 05:43 PM	#82
Mr. 5 Modder Raider 802 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	Why did this thread stop? What happened with this? It seems like everyone was nitrous happy for a while but I haven't seen anything lately. __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

08-05-2010, 07:56 AM	#84
cn555ic 464 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Yep still waiting on Shiv to give me the wiring schematics to the Procede...Hopefully it will come out soon... The wait is kind of torture because I have been waiting for over 2 months for the wiring to the Procede, but I guess Shiv wants everything to be perfect before he introduces to the public nitrous... Last edited by cn555ic; 08-05-2010 at 08:03 AM..
	Appreciate 0 Quote

08-05-2010, 09:16 AM	#86
cn555ic 464 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Lol. I wil just wait on Shiv. Don't want to spend any more money on nitrous system.
	Appreciate 0 Quote