[Tronner]

Great news! I've been having some misfire issues as well. Now if Shiv can fix my high-altitude issues I'll be really happy! Apparently the Procede autotuning needs to be sped up slightly to keep up with the really quick changes in atmospheric pressure like we see here in Denver.

[themyst]

Originally Posted by Tronner

Great news! I've been having some misfire issues as well. Now if Shiv can fix my high-altitude issues I'll be really happy! Apparently the Procede autotuning needs to be sped up slightly to keep up with the really quick changes in atmospheric pressure like we see here in Denver.

Looks like Shiv may have been onto something when he stated this misfire is isolated to cold weather users. Really curious.

[Enicinitas]

I'm still looking for a direct answer regarding the snow vs labonte failsafe. Jeez, at this point I'm going to assume people are protecting labonte until they may or may not deliver.. I have no problem getting the snow and adding it to the v kit. I just don't like fussing with meth issues. Thx to anyone that either pm's me or posts an honest take.

[Enicinitas]

F-it. I'll install the labonte and 'when' I have problems I'll be another customer that posts issues.

[themyst]

Originally Posted by Enicinitas

F-it. I'll install the labonte and 'when' I have problems I'll be another customer that posts issues.

read the whole thread. I posted all the information necessary regarding it.

In a nutshell, so far my SP flow sensor has handled 100% meth for 3 weeks and counting. The labonte unit is good for 70/30 tops. They both work with the JB4/Procede.

[Enicinitas]

Originally Posted by themyst

read the whole thread. I posted all the information necessary regarding it.

In a nutshell, so far my SP flow sensor has handled 100% meth for 3 weeks and counting. The labonte unit is good for 70/30 tops. They both work with the JB4/Procede.

Thanks, I have read the thread... This is good clarification though. I'm not as ballsy as you and others running 100% meth. So, did you have ANY issues running a 70/30 mix with the labonte?

[themyst]

Originally Posted by Enicinitas

Thanks, I have read the thread... This is good clarification though. I'm not as ballsy as you and others running 100% meth. So, did you have ANY issues running a 70/30 mix with the labonte?

I don't run 70/30. 90/10 or 100% only

The problem is identical to coolingmists flow sensor the bearing seizes up

[Enicinitas]

Ok, I guess this is what you meant by 'read the thread'. Thanks

[Enicinitas]

Meth is an issue that needs to be sorted out. I believe that the first company that partners with a flash and piggy and is proven good to go on the failsafe end will clean up on sales. 2c

[themyst]

you will quickly be running 80/20 or better real soon. I got the most ignition timing at 100% meth. If you don't mind spending the cash, I'd just get the SnowPerformance and be done with it. Snow Performance seems real confident that it will be fine on 100% meth. And so far in three weeks it has no problems.

[Iwantm3]

Originally Posted by themyst

you will quickly be running 80/20 or better real soon. I got the most ignition timing at 100% meth. If you don't mind spending the cash, I'd just get the SnowPerformance and be done with it. Snow Performance seems real confident that it will be fine on 100% meth. And so far in three weeks it has no problems.

Nice I think I'll go that route also, will order snow failsafe tomorrow, what's the name of the unit?

[themyst]

Originally Posted by Iwantm3

Nice I think I'll go that route also, will order snow failsafe tomorrow, what's the name of the unit?

since you are local to me, just wait a few months to see if mine fails or not. So far so good though, apparently i am flowing 950-1050 ml/min lol a shit ton of meth

[themyst]

Originally Posted by Iwantm3

Nice I think I'll go that route also, will order snow failsafe tomorrow, what's the name of the unit?

yo I wanna know what 18psi on 3 degrees of advance will feel like, I was impressed at 14-15psi!

[Enicinitas]

Thanks bro, I appreciate your post. I will get the SI from snow and run it as you documented earlier. Too bad labonte didn't fix this or promise a free fix or free trade in for those with the v Kit - or - those who sourced out the kit basically as u did

[Iwantm3]

fucking cm 70/30 bullshit is whack, I'ma send the vc2 to upgrade to 1.07 for my progressive spray and if your thing works fine I'll get it too, yeah the 14-15 psi with advance felt really strong I can't wait to finish my whip already

[themyst]

Originally Posted by Enicinitas

Thanks bro, I appreciate your post. I will get the SI from snow and run it as you documented earlier. Too bad labonte didn't fix this or promise a free fix or free trade in for those with the v Kit - or - those who sourced out the kit basically as u did

To be fair, labonte is still working with the manufacturer to come out with a flow sensor that works with 100% meth. Dan @ Labonte has been nothing but courteous and professional with the whole mess, and I've been without my Labonte unit for almost six weeks now. He agreed it was designed for 100% meth, and that's what it should be doing.

I just found a cheap SnowPerformance unit and figured I'd take the leap of faith, because in theory there is no reason why it wouldn't work aside from a different reading output. Safe to say, the cost of used SnowPerformance flow sensors have just gone up

[Iwantm3]

Originally Posted by themyst

To be fair, labonte is still working with the manufacturer to come out with a flow sensor that works with 100% meth. Dan @ Labonte has been nothing but courteous and professional with the whole mess, and I've been without my Labonte unit for almost six weeks now. He agreed it was designed for 100% meth, and that's what it should be doing.

I just found a cheap SnowPerformance unit and figured I'd take the leap of faith, because in theory there is no reason why it wouldn't work aside from a different reading output. Safe to say, the cost of used SnowPerformance flow sensors have just gone up

Who's selling 1 ? lol

[Enicinitas]

Originally Posted by themyst

To be fair, labonte is still working with the manufacturer to come out with a flow sensor that works with 100% meth. Dan @ Labonte has been nothing but courteous and professional with the whole mess, and I've been without my Labonte unit for almost six weeks now. He agreed it was designed for 100% meth, and that's what it should be doing.

I just found a cheap SnowPerformance unit and figured I'd take the leap of faith, because in theory there is no reason why it wouldn't work aside from a different reading output. Safe to say, the cost of used SnowPerformance flow sensors have just gone up

To be honest, I called Dan as well. He is a good guy and I expect that he wil fix this issue. I just can't put my car through the issues that come from meth 'failures', read, not blown Engines.

[themyst]

Originally Posted by Enicinitas

To be honest, I called Dan as well. He is a good guy and I expect that he wil fix this issue. I just can't put my car through the issues that come from meth 'failures', read, not blown Engines.

well that's the beauty of progressive meth, if the flow sensor craps out, the tune won't transition to high boost.

[Enicinitas]

True . But this concept is left for those on the meth fence.. Those who think and have the brains to do it correctly. Only about 5 % on This forum can pull off a meth install regardless of tune without Going through the easy issues

[themyst]

Originally Posted by Enicinitas

True . But this concept is left for those on the meth fence.. Those who think and have the brains to do it correctly. Only about 5 % on This forum can pull off a meth install regardless of tune without Going through the easy issues

On this platform, its pretty damn idiot-proof if you have the hardware.

[cn555ic]

Originally Posted by themyst

On this platform, its pretty damn idiot-proof if you have the hardware.

Its pretty simple install for those of us who have no fear in ripping the car apart, but its far from a novice install thats for sure...Even though hardware is pretty idiot proof, its actually doing it which scares many....I have alot of people asking me to install their meth setup but I decline because with meth its not just installing it, but you have to CONSTANTLY maintain that system and I am not looking forward to problems when they arise and have to troubleshoot it...Not fun at all.