Procede 6-14 beta map - MUCH better than 5-10 Beta

OpenFlash · 06-30-2011, 01:04 PM

Quote:

Originally Posted by megaman416

In the read me it mentions:

In this last production run of Procedes (for those who just received their Procedes in the past week), we made a change to the fuel control circuitry. Which gives us considerably more AFR adjustment range. But this also results in having to use different maps. So you will have to identify what Procede hardware revision you have by following this guideline:

-If you received your new Procede unit after May 24th, 2011, you have the new updated Rev.2b.
-If you received your new Procede since before that date (as the vast majority of you have), you have the original Rev.2a. Obviously, this applies to all people who have purchased used Procedes as well.

My unit was shipped from Visnu right on May 24th, is there anyway to tell if its a or b through the command center?

If you received it after the 24th, you have a rev2b.

C4sF80M3 · 06-30-2011, 01:06 PM

Quote:

Originally Posted by import36

roger that...didn't know if changing the starting point (down to say 50%) made much difference with these maps.

According to Shiv adjusting it makes no difference at all with the DIC maps, since it's DIC.

BMW1986 · 06-30-2011, 02:55 PM

Shiv:

What are the differences with the 6-14 Beta vs. 5-25 Beta?

Big Tom · 06-30-2011, 03:11 PM

I just had a little mail conversation with Shiv, and I had an idea of a really useful feature that he will implement in the next software release...
I'm really looking forward to it!

wren57 · 06-30-2011, 03:11 PM

Quote:

Originally Posted by BMW1986

Shiv:

What are the differences with the 6-14 Beta vs. 5-25 Beta?

Did you even read the thread and the readme in the file? The answers are all in front of you...

TT3 iN NyC · 06-30-2011, 04:21 PM

Quote:

Originally Posted by Big Tom

I just had a little mail conversation with Shiv, and I had an idea of a really useful feature that he will implement in the next software release...
I'm really looking forward to it!

What is it? Spill the beans!!!

BMW1986 · 06-30-2011, 07:06 PM

Currently threw 2 codes: 12544 which refers to underboost (30FF) and the other is 10940 Charging pressure sensor, electrical. Any idea what those two are about?

OpenFlash · 06-30-2011, 07:10 PM

Quote:

Originally Posted by BMW1986

Currently threw 2 codes: 12544 which refers to underboost (30FF) and the other is 10940 Charging pressure sensor, electrical. Any idea what those two are about?

After updating firmware, you will need to cycle ignition and then clear codes. Those codes are triggered by the firmware update process. Normal.

ETS Michael · 06-30-2011, 07:15 PM

Quote:

Originally Posted by shiv@vishnu

After updating firmware, you will need to cycle ignition and then clear codes. Those codes are triggered by the firmware update process. Normal.

I bet your going to see this problem because you didn't include the normal reset adaption instructions and clear codes.

BETA NOOBS! RUNNN!!

BMW1986 · 06-30-2011, 07:37 PM

Gee thanks mike! Maybe I should take out your intercooler and send it back! hahah

ETS Michael · 06-30-2011, 07:53 PM

Quote:

Originally Posted by BMW1986

Gee thanks mike! Maybe I should take out your intercooler and send it back! hahah

hahah... NOOOO!!!

Michael

BMW1986 · 06-30-2011, 07:56 PM

Hahaha yeaaa!! Codes are gone but I am still getting a CEL that comes on and then goes off. Any idea?

BMW1986 · 06-30-2011, 08:49 PM

I couldn't open the readme file for some reason on my windows 7 machine. Do all the adaptations need to be reset as well?

OpenFlash · 06-30-2011, 08:51 PM

Quote:

Originally Posted by BMW1986

I couldn't open the readme file for some reason on my windows 7 machine. Do all the adaptations need to be reset as well?

You should be able to read the Read Me file. Try downloading it again. I just added the documentation. Please read it carefully. It should sort you out.

Shiv

BMW1986 · 06-30-2011, 08:59 PM

Quote:

Originally Posted by shiv@vishnu

Quote:

Originally Posted by BMW1986

I couldn't open the readme file for some reason on my windows 7 machine. Do all the adaptations need to be reset as well?

You should be able to read the Read Me file. Try downloading it again. I just added the documentation. Please read it carefully. It should sort you out.

Shiv

Thanks Shiv! Car didn't feel as fast as 5-25 but will try and report back.

OpenFlash · 06-30-2011, 09:01 PM

Quote:

Originally Posted by BMW1986

Thanks Shiv! Car didn't feel as fast as 5-25 but will try and report back.

That's because you were in valet mode (CEL light flashing). And please read the bit about contacting us directly if you need help. These are BETA maps.

BMW1986 · 06-30-2011, 09:06 PM

Quote:

Originally Posted by shiv@vishnu

Quote:

Originally Posted by BMW1986

Thanks Shiv! Car didn't feel as fast as 5-25 but will try and report back.

That's because you were in valet mode (CEL light flashing). And please read the bit about contacting us directly if you need help. These are BETA maps.

much appreciated

mariusz335i · 06-30-2011, 09:18 PM

Some people never learn.I bet,that 1986 is the year when he was born and that explains everything.

BMW1986 · 06-30-2011, 09:21 PM

Quote:

Originally Posted by mariusz335i

Some people never learn.I bet,that 1986 is the year when he was born and that explains everything.

What kind of statement is that? Pretty ignorant of you I would say.

OpenFlash · 06-30-2011, 09:25 PM

let's play nice guys...

BMW1986 · 06-30-2011, 09:30 PM

I pay no attention to a forum tough guy. Proceed with the Procede talk

Brey335i · 06-30-2011, 09:43 PM

About to take these maps for a spin to see Transformers 3

Will report back later with my impressions

06-30-2011, 02:55 PM	#69
BMW1986 Major 93 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	Shiv: What are the differences with the 6-14 Beta vs. 5-25 Beta? __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

06-30-2011, 03:11 PM	#70
Big Tom Banned 59 Rep 1,054 Posts Drives: 335i n54 e92 MT Join Date: Mar 2009 Location: Västerås iTrader: (0)	I just had a little mail conversation with Shiv, and I had an idea of a really useful feature that he will implement in the next software release... I'm really looking forward to it! Last edited by Big Tom; 06-30-2011 at 03:20 PM..
	Appreciate 0 Quote

06-30-2011, 07:06 PM	#73
BMW1986 Major 93 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	Currently threw 2 codes: 12544 which refers to underboost (30FF) and the other is 10940 Charging pressure sensor, electrical. Any idea what those two are about? __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

06-30-2011, 07:37 PM	#76
BMW1986 Major 93 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	Gee thanks mike! Maybe I should take out your intercooler and send it back! hahah __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

06-30-2011, 07:56 PM	#78
BMW1986 Major 93 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	Hahaha yeaaa!! Codes are gone but I am still getting a CEL that comes on and then goes off. Any idea? __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

06-30-2011, 08:49 PM	#79
BMW1986 Major 93 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	I couldn't open the readme file for some reason on my windows 7 machine. Do all the adaptations need to be reset as well? __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

06-30-2011, 09:18 PM	#84
mariusz335i Private 6 Rep 84 Posts Drives: 2015 M3 Join Date: Aug 2010 Location: Pensacola iTrader: (0)	Some people never learn.I bet,that 1986 is the year when he was born and that explains everything.
	Appreciate 0 Quote

06-30-2011, 09:25 PM	#86
OpenFlash 1806 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	let's play nice guys...
	Appreciate 0 Quote

06-30-2011, 09:30 PM	#87
BMW1986 Major 93 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	I pay no attention to a forum tough guy. Proceed with the Procede talk __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

06-30-2011, 09:43 PM	#88
Brey335i Banned 118 Rep 4,771 Posts Drives: e46 ///M3 Join Date: Oct 2009 Location: Austin, TX iTrader: (11)	About to take these maps for a spin to see Transformers 3 Will report back later with my impressions
	Appreciate 0 Quote