Official Tri-State & PA Chat Thread (#6)

Sejzilla · 07-22-2010, 12:46 PM

Quote:

Originally Posted by Alpine Whiteboy

Good shit Capo! I would love to register my car, it is an eye-catcher but the minor paint chips from pebbles makes me think it's not worthy for a show... And those paint chips are maybe 3 on the side passenger door and rear panel. My front and rear bumpers are fine lol.

My boys probably gonna have his RX-8 there like he does every year. It's gonna be with all the RCT Performance cars.

Sej. Is no herra frush. It's just way too aggressive lol you will rub all over the place

you kno ppl from rct performance? my boy james is the co owner of that shop. the one that drives the M3

Sejzilla · 07-22-2010, 12:47 PM

umm...so whats a good non-stock offset to go with? stock stance is just ghey for me

Alpine Whiteboy · 07-22-2010, 12:51 PM

LMAO GT my name is VINNIE!! Jerry quite contrary calls me Larry

I painted them myself. Home Depot DIY special. 3 small triangular sponge paint brushes, a plastic pan, blue painters tape, newspaper, and a can of Flat Black outdoor plastic spray paint.

Take some painters tape and wad it up into a ball and tape it under the plastic pan on one side so it's on a tilt when u set it down. Then tape the newspaper all around your grills to protect your bumper. Then spray the paint into the plastic pan to make a little puddle of paint, dip brush and dab on. 3 coats should be good.

Alpine Whiteboy · 07-22-2010, 12:59 PM

Yeah I used to take my old car there Sej. I know James, the chubby Asian with the glasses. Ryan is the owner. They are way overpriced and have a "I don't care" attitude. So I stopped going there. They do great work. Oh and the fact that I spent $6k on a turbo kit for my old car and Ryan gave me his word it would be completely safe, the car would stall out at slow speeds, and my tranny started slipping and when I mentioned it to them they told me it's not slipping it's the tune that was jerky. Safe to say I had to replace the tranny for $2500. Yeah real safe, good "tune"... And every time I call their shop or go there, they act like they don't wanna be bothered with me so fuck them.

As far as wheels if u want 19's Rims should be 19x9" Front with 35 offset and rears 19x10" 30 offset. That will get u flush without rolling fenders

GTiceman · 07-22-2010, 01:01 PM

Quote:

Originally Posted by Alpine Whiteboy

LMAO GT my name is VINNIE!! Jerry quite contrary calls me Larry

I painted them myself. Home Depot DIY special. 3 small triangular sponge paint brushes, a plastic pan, blue painters tape, newspaper, and a can of Flat Black outdoor plastic spray paint.

Take some painters tape and wad it up into a ball and tape it under the plastic pan on one side so it's on a tilt when u set it down. Then tape the newspaper all around your grills to protect your bumper. Then spray the paint into the plastic pan to make a little puddle of paint, dip brush and dab on. 3 coats should be good.

the one time i don't look up somebody's name ... o well

thanks though

Sejzilla · 07-22-2010, 01:03 PM

Quote:

Originally Posted by Alpine Whiteboy

Yeah I used to take my old car there Sej. I know James, the chubby Asian with the glasses. Ryan is the owner. They are way overpriced and have a "I don't care" attitude. So I stopped going there. They do great work. Oh and the fact that I spent $6k on a turbo kit for my old car and Ryan gave me his word it would be completely safe, the car would stall out at slow speeds, and my tranny started slipping and when I mentioned it to them they told me it's not slipping it's the tune that was jerky. Safe to say I had to replace the tranny for $2500. Yeah real safe, good "tune"... And every time I call their shop or go there, they act like they don't wanna be bothered with me so fuck them.

As far as wheels if u want 19's Rims should be 19x9" Front with 35 offset and rears 19x10" 30 offset. That will get u flush without rolling fenders

lol i see....even though james is my boy i dont go there at all because of all the things youve mentioned above, i took my rsx there a few times and i was really disappointed.

so basically the wheels they have at wheeldude.com will fit right....they have a 37 and a 30 offset

Alpine Whiteboy · 07-22-2010, 01:11 PM

Quote:

Originally Posted by Sejzilla

lol i see....even though james is my boy i dont go there at all because of all the things youve mentioned above, i took my rsx there a few times and i was really disappointed.

so basically the wheels they have at wheeldude.com will fit right....they have a 37 and a 30 offset

Yeah wheeldude is good. They got a bunch of nice LM's.. And I'm glad u know what I mean about RCT lol. James is actually cool tho. Ryan is just full of himself and offers u know help or suggestions if it's not something they sell.

Sal G@Camber-Toe · 07-22-2010, 01:31 PM

herro?

PandaBear · 07-22-2010, 01:39 PM

heeerrroooo

PandaBear · 07-22-2010, 01:47 PM

guys how long does it take for my plates to come from albany....something got screwed up and i had to resign the papers and send it back up there so they can send me plates...so now my temp license is expired and i can't drive my car...but how long does it usually take?

KyLu II · 07-22-2010, 02:04 PM

Quote:

Originally Posted by coldasicex5

larry.. are you a ricer?

Remember larry? He was a crazy mofo' hahaha

KyLu II · 07-22-2010, 02:05 PM

Quote:

Originally Posted by PandaBear

guys how long does it take for my plates to come from albany....something got screwed up and i had to resign the papers and send it back up there so they can send me plates...so now my temp license is expired and i can't drive my car...but how long does it usually take?

Do what mexicans do

KyLu II · 07-22-2010, 02:14 PM

Quote:

Originally Posted by coldasicex5

Kumar was more insane, prolonged by a fate of destiny, Louis.

it cant be!!! You supposed be DEAd!!!

Sejzilla · 07-22-2010, 02:16 PM

Quote:

Originally Posted by PandaBear

guys how long does it take for my plates to come from albany....something got screwed up and i had to resign the papers and send it back up there so they can send me plates...so now my temp license is expired and i can't drive my car...but how long does it usually take?

since i work for chase i sometimes deal with other peoples auto loan...and in the process ive noticed that it CAN take up to a month for them to get it straightened out....but i hope youre not that unlucky

Sejzilla · 07-22-2010, 02:16 PM

im thinking about going for custom plates...yay or nay?

KyLu II · 07-22-2010, 02:19 PM

Quote:

Originally Posted by Sejzilla

im thinking about going for custom plates...yay or nay?

Do it!! They should read "assmilk"

Kevin@AKMotorwerk · 07-22-2010, 02:20 PM

Quote:

Originally Posted by coldasicex5

ask kevin

AT LEAST MY FU(KING HOOD WAS CLOSED

KyLu II · 07-22-2010, 02:21 PM

Quote:

Originally Posted by coldasicex5

dat bitch aint dead, b. he got a divorce from my ass again son, shit dawg

LOMO!!! Im having flash backs!!!

Make

Em

[COLOR="rgb(139, 0, 0)"]Stop!![/COLOR]

Kevin@AKMotorwerk · 07-22-2010, 02:23 PM

Quote:

Originally Posted by coldasicex5

AT LEAST I DROVE WITH A HALF OPEN HOOD WITH A LICENSE (AT THE TIME)

I DONT LIKE LITTLE PEOPLE N E MORE!!!!!

saturday little man, saturday your joke is ending

Alpine Whiteboy · 07-22-2010, 02:23 PM

I'm thinking of putting my plate "JBEAST3" but I don't know if the dealer will void my warranty

KyLu II · 07-22-2010, 02:26 PM

Quote:

Originally Posted by Alpine Whiteboy

I'm thinking of putting my plate "JBEAST3" but I don't know if the dealer will void my warranty

Your turning into jimmeh!!!

Alpine Whiteboy · 07-22-2010, 02:28 PM

I wanna put "3B3A5T" is "3 Beast" with "335" hidden like a NINJA!

07-22-2010, 12:47 PM	#90158
Sejzilla Major 51 Rep 1,436 Posts Drives: AW 14 M5 ZCP Join Date: Jun 2010 Location: BAYSIDE NY iTrader: (6)	umm...so whats a good non-stock offset to go with? stock stance is just ghey for me
	Appreciate 0

07-22-2010, 12:51 PM	#90159
Alpine Whiteboy Jerry's Fault... 187 Rep 9,258 Posts Drives: 2013 535xi M-Sport SGM Join Date: Sep 2009 Location: Queens, N.Y. iTrader: (1)	LMAO GT my name is VINNIE!! Jerry quite contrary calls me Larry I painted them myself. Home Depot DIY special. 3 small triangular sponge paint brushes, a plastic pan, blue painters tape, newspaper, and a can of Flat Black outdoor plastic spray paint. Take some painters tape and wad it up into a ball and tape it under the plastic pan on one side so it's on a tilt when u set it down. Then tape the newspaper all around your grills to protect your bumper. Then spray the paint into the plastic pan to make a little puddle of paint, dip brush and dab on. 3 coats should be good. __________________ *BoopieMotorwerks MartinoAutoConcepts**
	Appreciate 0

07-22-2010, 12:59 PM	#90160
Alpine Whiteboy Jerry's Fault... 187 Rep 9,258 Posts Drives: 2013 535xi M-Sport SGM Join Date: Sep 2009 Location: Queens, N.Y. iTrader: (1)	Yeah I used to take my old car there Sej. I know James, the chubby Asian with the glasses. Ryan is the owner. They are way overpriced and have a "I don't care" attitude. So I stopped going there. They do great work. Oh and the fact that I spent $6k on a turbo kit for my old car and Ryan gave me his word it would be completely safe, the car would stall out at slow speeds, and my tranny started slipping and when I mentioned it to them they told me it's not slipping it's the tune that was jerky. Safe to say I had to replace the tranny for $2500. Yeah real safe, good "tune"... And every time I call their shop or go there, they act like they don't wanna be bothered with me so fuck them. As far as wheels if u want 19's Rims should be 19x9" Front with 35 offset and rears 19x10" 30 offset. That will get u flush without rolling fenders __________________ *BoopieMotorwerks MartinoAutoConcepts**
	Appreciate 0

07-22-2010, 01:31 PM	#90164
Sal G@Camber-Toe 204 Rep 14,190 Posts Drives: E92 335xi 6mt Join Date: Jun 2009 Location: Long Island, NY iTrader: (2)	herro?
	Appreciate 0

07-22-2010, 01:39 PM	#90165
PandaBear Banned 194 Rep 7,269 Posts Drives: 2009 335i X-Drive Join Date: Sep 2009 Location: Long Island, New York iTrader: (1) Garage List 2009 335i X-Drive [0.00] 2007 328xi [0.00]	heeerrroooo
	Appreciate 0

07-22-2010, 01:47 PM	#90166
PandaBear Banned 194 Rep 7,269 Posts Drives: 2009 335i X-Drive Join Date: Sep 2009 Location: Long Island, New York iTrader: (1) Garage List 2009 335i X-Drive [0.00] 2007 328xi [0.00]	guys how long does it take for my plates to come from albany....something got screwed up and i had to resign the papers and send it back up there so they can send me plates...so now my temp license is expired and i can't drive my car...but how long does it usually take?
	Appreciate 0

07-22-2010, 02:16 PM	#90171
Sejzilla Major 51 Rep 1,436 Posts Drives: AW 14 M5 ZCP Join Date: Jun 2010 Location: BAYSIDE NY iTrader: (6)	im thinking about going for custom plates...yay or nay?
	Appreciate 0

07-22-2010, 02:23 PM	#90176
Alpine Whiteboy Jerry's Fault... 187 Rep 9,258 Posts Drives: 2013 535xi M-Sport SGM Join Date: Sep 2009 Location: Queens, N.Y. iTrader: (1)	I'm thinking of putting my plate "JBEAST3" but I don't know if the dealer will void my warranty __________________ *BoopieMotorwerks MartinoAutoConcepts**
	Appreciate 0

07-22-2010, 02:28 PM	#90178
Alpine Whiteboy Jerry's Fault... 187 Rep 9,258 Posts Drives: 2013 535xi M-Sport SGM Join Date: Sep 2009 Location: Queens, N.Y. iTrader: (1)	I wanna put "3B3A5T" is "3 Beast" with "335" hidden like a NINJA! __________________ *BoopieMotorwerks MartinoAutoConcepts**
	Appreciate 0