[unrulyteach]

Originally Posted by NathanK24

I have 50% tints on all sides and 35% on the rear window. Wish I did 35% all around. My main goal was to just even out the difference between front and rear side windows. Barely looks tinted so I doubt I'll get pulled over. 35% guys I know haven't had issues with cops though. Limit for front side in MI is 0 I think?

20% is the way to go

[Greyfox]

Chased down the oil leak and discovered that the valvetronic motor seal was leaking on my wife's car. Replaced it.

[colorado.e9x]

Bought my 330xi with 5% all around. Dropped the front windows to 15% and added a 5% windshield visor. Works perfectly for me

[RealJ22]

Finally got some decent wheels for the E92. Also ordered *M3 Fenders* Gasp.

OEM M220 Forged. Super light. Was going to run my M-Pars, but this is much better

[nsjames]

Originally Posted by desertman123

Gentlemen any issues with polarized sunglasses with these ceramic tints?

not really. I see some odd polarized squares in the rear view, but only in the rear view. it's something with the auto tint mirror+tint+sunglasses.
they have made transitions glasses completely useless though. Blocks so much UV they don't work.

Originally Posted by TheMidnightNarwhal

Basically here nothing can be put in front windshield. Front side windows must allow 70% light. Rear side windows and rear window can be anything.

Hahaha but yeah holy fuck it's dumb, if you have sunglasses technically would that cause the exact same issues as having tint if we follow their logic. I hate tint laws.

if you go to a reputable shop, and have name brand film installed, thy tint film will have a batch number registered with the government for compliance.
Keep the receipt in the glove box.
and any good tint shop will have a VLT meter. They will test the windows before tint application. You lose 3-5% just through the non tinted glass. so if they test out at 4%, and they install a tint that allows 75% of the light, you will be 1% above the legal limit.

and no worries about different tint levels front and rear. I left the front windows lighter, it looks factory.

[Lost808]

Small detailing session to remove hard water spots and a couple pics after.[IMG][/IMG]

[OnlyDriveGerman]

Washed, oiled and installed my k&n air filter for the euro air box. Remembered I forgot to post pics of my broken u joint and front driveshaft. Broken side was the differential side. Car's like new after it was replaced!

[CTinline-six]

Originally Posted by OnlyDriveGerman

Washed, oiled and installed my k&n air filter for the euro air box. Remembered I forgot to post pics of my broken u joint and front driveshaft. Broken side was the differential side. Car's like new after it was replaced!

Ouch that must've made quite the noise and vibration going down the road.

[F30lolz]

Washed both the e90 and the f30.

[Bufalo]

Just swapped out my non-heated driver's seat for a heated one. Just in time for summer!

[Welcome to NBA Jam]

Originally Posted by Lost808

Small detailing session to remove hard water spots and a couple pics after.[IMG][/IMG]

I love Lemans Blue when it's detailed. It's such a great color.

[OnlyDriveGerman]

Originally Posted by CTinline-six

Ouch that must've made quite the noise and vibration going down the road.

Believe it or not, there was no vibration. Did have some odd tinny sounds for a couple weeks that I thought were suspension related at slow speeds when shifting, but couldn't find from where in the suspension… obviously. Lol Had a faint sound similar to a wheel bearing going bad for a few days so I got it on a lift and that was that. So yeah, very oddly no vibration.

[UncleShrek]

Got a check engine light 4 days ago
Eccentric Shaft Sensor
Vacuum leak
Possible ECM failure...
Just before vacation...

[RealJ22]

Ordered M3 Mirrors

[S65Hunter]

Originally Posted by RealJ22

Ordered M3 Mirrors

Send them to me instead.

[RealJ22]

Originally Posted by AlpineE93

Sens them to me instead.

Ill post up some photo's when they are here. If everything goes according to plan, I will post up a DIY for a cost effective method.

[charlieb]

Rear calipers and pads, front rotors and pads.
Replaced both rear abs sensors (shimmed so the hub doesn't eat them) - YAY NO MORE ABS lights.
Also soldered rear pad sensor and replaced front pad wear sensor.
Reset pad wear sensors - Odometer reset + BC button at same time to access reset menu.

[porsche959]

Originally Posted by charlieb

Rear calipers and pads, front rotors and pads.
Replaced both rear abs sensors (shimmed so the hub doesn't eat them) - YAY NO MORE ABS lights.
Also soldered rear pad sensor and replaced front pad wear sensor.
Reset pad wear sensors - Odometer reset + BC button at same time to access reset menu.

what error lights/ numbers were you getting?

[pizza_nightmare]

Changed the Oil Filter Housing Gasket on my 165k mile '07 328.

Way easier than I predicted.

Changed the cabin air filter.

[charlieb]

Originally Posted by porsche959

what error lights/ numbers were you getting?

ABS, DSC, AIR BAG, BRAKE.
No speedometer, no cruise control.

I kept replacing right (cruise control) and left (speedometer) rear speed sensors but it took a while to realize the sensor was being ground down by the portion of the hub the sensor reads.

I finally got a good set of sensors and shimmed them using large washers.

[bluewater328]

Originally Posted by charlieb

ABS, DSC, AIR BAG, BRAKE.
No speedometer, no cruise control.

I kept replacing right (cruise control) and left (speedometer) rear speed sensors but it took a while to realize the sensor was being ground down by the portion of the hub the sensor reads.

I finally got a good set of sensors and shimmed them using large washers.

Yeah, I remember reading a post about that hack awhile back.

[bluewater328]

Originally Posted by OnlyDriveGerman

Washed, oiled and installed my k&n air filter for the euro air box. Remembered I forgot to post pics of my broken u joint and front driveshaft. Broken side was the differential side. Car's like new after it was replaced!

How did that happen?