BMW CODING success

DimSum · 01-15-2011, 03:15 PM

Quote:

Originally Posted by Toshi

Mmm... Seems nobody likes the DRL taillight delete...

I used trial-and-error approach and... finally I found the code today!

"DRL_TFL_MIT_RL_BL_2" in NFRM change aktiv to nicht_aktiv

Now my E92 turns on the DRL with AEs only.
I updated the spreadsheet for those who are interested.

Congratulations Toshi-San!

Randall41 · 01-15-2011, 03:48 PM

For all that purchased the USB/k+DECAN cable through EBay here is a link to the Correct drivers. Might cure most problems.

http://www.osefactory.com/tools/k+dcan/

Technic · 01-15-2011, 03:50 PM

Quote:

Originally Posted by spazticrecords

@Technic

what did you set your car to?

It is in HiFi from Top HiFi (Individual Audio) right now as I have aftermarket amps.

BabyBlack · 01-15-2011, 06:02 PM

Will this be the cable that I need to coding for the 2011 model?
http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

Wissam · 01-15-2011, 06:35 PM

Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?

Amlethae · 01-15-2011, 07:24 PM

Quote:

Originally Posted by BabyBlack

Will this be the cable that I need to coding for the 2011 model?
http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

Yes, you'll just need to pull it apart and break off PIN 8 (easier than desoldering)

dr004 · 01-15-2011, 08:12 PM

Quote:

Originally Posted by Wissam

Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?

i had no luck with Win 7 64bit. I partitioned my HD and loaded a 32 bit version. That's the only way I could get mine to work

spera23 · 01-15-2011, 08:59 PM

Anyone know how to code the NFRM on an e92? It shows up as one of the 3 ECU Modules when I hit <F3> but does not show up as a module when i select "process ecu". Only one that shows up then is FRM.

BabyBlack · 01-15-2011, 11:46 PM

Quote:

Originally Posted by Amlethae

Yes, you'll just need to pull it apart and break off PIN 8 (easier than desoldering)

Thank you

bimal296 · 01-16-2011, 08:09 AM

Anyone know how to code Top Hifi in 2008 E92 CIC

Thx

Technic · 01-16-2011, 08:22 AM

Quote:

Originally Posted by bimal296

Anyone know how to code Top Hifi in 2008 E92 CIC

Thx

I just added that to the database.

bimal296 · 01-16-2011, 08:48 AM

Quote:

Originally Posted by Technic

I just added that to the database.

AUDIO_SYSTEM_CIC hifi to top_hifi in 0ct 2008 E92 M3 CIC cuts off the
sound completely

I changed it in CIC module.

Can you help.I see modifications for 2009/2010/2011

Thx

e90TiAg335i · 01-16-2011, 09:05 AM

Quote:

Originally Posted by Amlethae

Yes, you'll just need to pull it apart and break off PIN 8 (easier than desoldering)

You don't need to break off pin 8 except for cars equiped with ethernet. 1 and 3series do not have ethernet. I've verified with an 11 135 already.

Technic · 01-16-2011, 11:05 AM

Quote:

Originally Posted by bimal296

AUDIO_SYSTEM_CIC hifi to top_hifi in 0ct 2008 E92 M3 CIC cuts off the
sound completely

I changed it in CIC module.

Can you help.I see modifications for 2009/2010/2011

Thx

Of course it will cut off the analog sound... you will need a MOST amp and new fiber optic harness.

spazticrecords · 01-16-2011, 11:49 AM

Does anyone have a 2010 + with an LMA module. I only have NRFM module and not LMA. I see in the spreadsheet someone posted positive results with 2010 and LMA module. I have stock Xenon's and I made a change for high beams and fogs at same time in NRFM module and it worked.

bimal296 · 01-16-2011, 12:22 PM

Quote:

Originally Posted by Technic

Of course it will cut off the analog sound... you will need a MOST amp and new fiber optic harness.

Thx

bimal296 · 01-16-2011, 12:45 PM

Quote:

Originally Posted by bimal296

My E92 M3 Defaults to Drivelogic D2(Euro Version)

Anyone knows how to change thro' NCS the Default as I
want it to default to D3 when I start the car without
having to use the M buttom

Thx

anyone found the way to change the Drivelogic settings.

Thx

spazticrecords · 01-16-2011, 03:06 PM

Updated DATEN files for CIC module for 2009 + cars. I uploaded another archive a while back, but some reported that other modules couldn't be read/write when replaced all files so I just found the CIC files instead of everything. These are just the files for the CIC. Replace with respective directories inside the achieve. There are 2 directories.

C:\NCSEXPERT\DATEN\E89
C:\EDIBIAS\ECU

Once replaced I was able to read and write all previous working modules + CIC. Please let me know if you have any questions and this works.

http://hotfile.com/dl/97282608/d8023...dated.rar.html

Pass: e90post

spera23 · 01-17-2011, 01:34 PM

Does anyone know how to code the different welcome lights to activate when the car is unlocked?

WELCOME_LIGHTS in the CAPPL module seems to just give me a "welcome lights" option in the iDrive menu that does not change anything nor does it stay activated!

Steveo · 01-17-2011, 01:51 PM

Quote:

Originally Posted by bimal296

anyone found the way to change the Drivelogic settings.

Thx

Would love to know this too,

When i connected last time to the car i had a play about and got the below on the screen, though didnt want to go changing anything in case it went tittts up!

Noxious_ · 01-17-2011, 02:26 PM

Quote:

Originally Posted by Wissam

Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?

I couldnt get it running without XP mode. If you need to upgrade Win 7 to ulitimate to get XP mode there is a keygen on the piratebay that will do it no problem (pm me for link). From there you can download virtual PC and XP mode.

I can get that far but when I try to run NCSEXPERT i get: CANNOT FIND APP.DLL

Did anyone else have this issue or is it just me. I know its related to a registry error but could not find the solution.

GenePoole · 01-17-2011, 04:59 PM

Quote:

Originally Posted by Noxious_

I couldnt get it running without XP mode. If you need to upgrade Win 7 to ulitimate to get XP mode there is a keygen on the piratebay that will do it no problem (pm me for link). From there you can download virtual PC and XP mode.

I can get that far but when I try to run NCSEXPERT i get: CANNOT FIND APP.DLL

Did anyone else have this issue or is it just me. I know its related to a registry error but could not find the solution.

Are you sure it's not api.dll? That is a 16bit dll that NCSExpert need to talk to the 32 bit ediabas.

01-15-2011, 03:48 PM	#1014
Randall41 Private First Class 15 Rep 121 Posts Drives: 2008 BMW 135i Alpine White Join Date: Apr 2008 Location: DreamLand iTrader: (1)	For all that purchased the USB/k+DECAN cable through EBay here is a link to the Correct drivers. Might cure most problems. http://www.osefactory.com/tools/k+dcan/ Last edited by Randall41; 01-27-2011 at 05:37 PM..
	Appreciate 0 Quote

01-15-2011, 06:02 PM	#1016
BabyBlack First Lieutenant 28 Rep 304 Posts Drives: E46 M3 & E90 335i & E71 X6M Join Date: Jun 2006 Location: Canada iTrader: (3)	Will this be the cable that I need to coding for the 2011 model? http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT
	Appreciate 0 Quote

01-15-2011, 06:35 PM	#1017
Wissam Private First Class 20 Rep 141 Posts Drives: 2007 e90 328I Join Date: Dec 2006 Location: GTA, Canada iTrader: (3)	Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?
	Appreciate 0 Quote

01-15-2011, 08:59 PM	#1020
spera23 Second Lieutenant 13 Rep 208 Posts Drives: 335i Join Date: Sep 2009 Location: Toronto iTrader: (3)	Anyone know how to code the NFRM on an e92? It shows up as one of the 3 ECU Modules when I hit <F3> but does not show up as a module when i select "process ecu". Only one that shows up then is FRM.
	Appreciate 0 Quote

01-16-2011, 08:09 AM	#1022
bimal296 New Member 0 Rep 9 Posts Drives: E92 M3 Join Date: Feb 2010 Location: Mauritius iTrader: (0)	Anyone know how to code Top Hifi in 2008 E92 CIC Thx
	Appreciate 0 Quote

01-16-2011, 11:49 AM	#1027
spazticrecords Banned 1 Rep 123 Posts Drives: 2010 E90 328 XI Join Date: Jun 2007 Location: Yorktown Heights, NY. iTrader: (0)	Does anyone have a 2010 + with an LMA module. I only have NRFM module and not LMA. I see in the spreadsheet someone posted positive results with 2010 and LMA module. I have stock Xenon's and I made a change for high beams and fogs at same time in NRFM module and it worked.
	Appreciate 0 Quote

01-16-2011, 03:06 PM	#1030
spazticrecords Banned 1 Rep 123 Posts Drives: 2010 E90 328 XI Join Date: Jun 2007 Location: Yorktown Heights, NY. iTrader: (0)	Updated DATEN files for CIC module for 2009 + cars. I uploaded another archive a while back, but some reported that other modules couldn't be read/write when replaced all files so I just found the CIC files instead of everything. These are just the files for the CIC. Replace with respective directories inside the achieve. There are 2 directories. C:\NCSEXPERT\DATEN\E89 C:\EDIBIAS\ECU Once replaced I was able to read and write all previous working modules + CIC. Please let me know if you have any questions and this works. http://hotfile.com/dl/97282608/d8023...dated.rar.html Pass: e90post
	Appreciate 0 Quote

01-17-2011, 01:34 PM	#1031
spera23 Second Lieutenant 13 Rep 208 Posts Drives: 335i Join Date: Sep 2009 Location: Toronto iTrader: (3)	Does anyone know how to code the different welcome lights to activate when the car is unlocked? WELCOME_LIGHTS in the CAPPL module seems to just give me a "welcome lights" option in the iDrive menu that does not change anything nor does it stay activated!
	Appreciate 0 Quote