Official Alabama Thread

Vdt0001 · 03-10-2014, 04:53 PM

Anybody know a good dealership outside of Tom Williams for service? I have never been so consistently underwhelmed by a group of people as I have by them. I will drive to Tuscaloosa or Decatur if they are reliable and reasonable. Any thoughts?

KhelMP2013 · 03-10-2014, 05:04 PM

I made it over there this past Saturday, but I got distracted and didn't get to meet any of the BMW guys there. I was in the gray 335i convertible.

Vdt0001 · 03-10-2014, 07:23 PM

Quote:

Originally Posted by Ross328i

I know of 3 independent shops, but I have no experience with any of them, maybe some of the others have: Bimmer Motor Works in Trussville, Momentum in Riverchase/Pelham and Empire Autohaus in Pelham.

Yeah I really like Joey in Trussville. Problem is just getting factory warranty issues resolved and other things like a DME upgrade (dealership only I believe)

Vdt0001 · 03-10-2014, 09:12 PM

Quote:

Originally Posted by Ross328i

Have you tried BMW of Montgomery?

Not yet, do you recommend them? All I really need done is a DME upgrade so I can put a COBB on my 335.

Datsik · 03-11-2014, 11:28 AM

Quote:

Originally Posted by cipher982

I made it over there this past Saturday, but I got distracted and didn't get to meet any of the BMW guys there. I was in the gray 335i convertible.

Ahh, I was in the White E90 M3. I saw you when we were all leaving. You should come out again.

avol3xo · 03-11-2014, 04:39 PM

I hope to make it out maybe next weekend the 22nd.

blau335 · 03-11-2014, 09:37 PM

Newb here. Assuming my car is ready, I'll be at Cars and Coffee

Datsik · 03-19-2014, 05:20 PM

Here's the Ferrari Enzo and F40 that have been at Cars and Coffee the past two weekends

JazStar740 · 03-19-2014, 08:35 PM

While at BMW of Montgomery today I saw a E92 328i wrapped in a flat red.... Did not they had someone here in Montgomery wrapping cars.

ghumber1 · 03-25-2014, 02:15 AM

Quote:

Originally Posted by JazStar740

While at BMW of Montgomery today I saw a E92 328i wrapped in a flat red.... Did not they had someone here in Montgomery wrapping cars.

I saw that car about two weeks ago... Looked good

avol3xo · 04-03-2014, 06:03 PM

Anyone coming to Cars and Coffee Montgomery this saturday?

KhelMP2013 · 04-09-2014, 01:26 PM

Quote:

Originally Posted by luke0818

Hey guys. I just want to introduce myself. My is car 2008 black saph e93 FBO+E85+METH+Wedge flash. Where is all the bmw guys hang out in Birmingham?

I usually see a few at the Cars and Coffee event Saturday mornings at Brookwood Mall. Other than that, I'm not sure of any secret hang-out spots for the BMW guys. But if anyone hears of any, let me know!

What transmission do you have? I just started e85 on my car, but the clutch has started to slip pretty bad above 15psi. Seems I'm looking at $1,200+ just for the parts (clutch/SFW)

KhelMP2013 · 04-11-2014, 12:49 AM

Quote:

Originally Posted by luke0818

I have automatic. I am about to flash it back to alpina. The car is making too much torque so sometimes it gives me a DSC malfunction error because of the flash I have on it. What mod do you have on your car?

Just DCI, JB4, and muffler delete. With e85 and autotune I hit about 17psi. But put it back on map 1 for now while I wait for a new clutch.

SLEEP3R · 04-16-2014, 09:33 AM

Anyone in Alabama that has done jb4 install and remove?
preferably closer to Huntsville area.

I got my 335i with the jb4 installed and liked it for a while but decided to go the cobb route. and i love acessport 100x better IMO.

But now i want to remove the jb4 (so i can sell it and get some extra cash for my new exhaust). I have seen the install videos and read on the forums but becuase i actually never did the install in the first place, looking at all the wires looks a bit intimidating. So was wanting to get some experinced help.

Any suggestions would be greatly appriecated. Thx.

thecrc · 07-23-2014, 11:01 AM

Anybody going to Cars and Coffee this Saturday? I still haven't been but am going to go this weekend to check it out, weather permitting.

lukeperformance · 07-24-2014, 02:58 PM

Quote:

Originally Posted by thecrc

Anybody going to Cars and Coffee this Saturday? I still haven't been but am going to go this weekend to check it out, weather permitting.

where is the event? and when?

Bamaben · 07-24-2014, 04:42 PM

https://m.facebook.com/BhmCarsCoffee

KhelMP2013 · 08-04-2014, 01:28 PM

Does anyone know a quality auto electrician or non-dealer shop that can diagnose or repair a faulty DME?

A misfire that I originally thought might just be a bad injector now seems to lead to a failed DME. It seems a lot of guys on the forums are having this issue with a certain production date in mid 2007. One or more MOSFET transistors within the DME burn out and cause erratic injector behavior.

It is warrantied by federal emmisions standards till 80,000 miles but I just passed that mark, so it looks like it will be up to $3,000 at the dealer for a replacement.

But fortunately this can be repaired with a $2 transistor, from what I have been reading. I have soldered in the past, but don't trust myself with something this important.

lukeperformance · 08-04-2014, 02:08 PM

Quote:

Originally Posted by cipher982

Does anyone know a quality auto electrician or non-dealer shop that can diagnose or repair a faulty DME?

A misfire that I originally thought might just be a bad injector now seems to lead to a failed DME. It seems a lot of guys on the forums are having this issue with a certain production date in mid 2007. One or more MOSFET transistors within the DME burn out and cause erratic injector behavior.

It is warrantied by federal emmisions standards till 80,000 miles but I just passed that mark, so it looks like it will be up to $3,000 at the dealer for a replacement.

But fortunately this can be repaired with a $2 transistor, from what I have been reading. I have soldered in the past, but don't trust myself with something this important.

Did you flash the car? How did you find out that the issue? Any how if you need some help you can hit me up. I am in Birmingham. You can email me at Lukeperformance@gmail.com.

KhelMP2013 · 08-04-2014, 03:04 PM

E-mail sent!

Running JB4 piggy-back for about 5 months. Pulling a 30ba code (DME internal failure) and sporadic misfires from mostly cylinder 2, but also others at times. Engine fires up with noticeable misfire on single cylinder, then loses all power and stalls between 5-10 seconds.

Fortunately I can ride the motorcycle to work in the meantime, but it's definitely a bit warm with my full suit and tie outfit.

5tony · 12-31-2019, 07:42 AM

Can someone recommend a good window tint shop in the Birmingham area? Need to replace some scratched and bubbling tint.

speedeep · 03-09-2020, 01:30 PM

New to the forum, recently acquired 2011 BMW 335D. 57k miles, JBD piggyback
Near Prattville. Anybody from metro Montgomery head(ing) up to Cars and Coffee in Birmingham?

03-10-2014, 04:53 PM	#89
Vdt0001 New Member 2 Rep 20 Posts Drives: 2011 335i e90 Join Date: Feb 2014 Location: Birmingham iTrader: (0)	Anybody know a good dealership outside of Tom Williams for service? I have never been so consistently underwhelmed by a group of people as I have by them. I will drive to Tuscaloosa or Decatur if they are reliable and reasonable. Any thoughts?
	Appreciate 0 Quote

03-10-2014, 05:04 PM	#90
KhelMP2013 Private 2 Rep 78 Posts Drives: 07 335i Join Date: Dec 2013 Location: Birmingham, AL iTrader: (0)	I made it over there this past Saturday, but I got distracted and didn't get to meet any of the BMW guys there. I was in the gray 335i convertible.
	Appreciate 0 Quote

03-11-2014, 04:39 PM	#94
avol3xo Captain 63 Rep 733 Posts Drives: 2008 E92 M3 Join Date: Jul 2012 Location: Atlanta, GA iTrader: (1) Garage List 2008 BMW [0.00]	I hope to make it out maybe next weekend the 22nd. __________________ 2011 BMW 335i E92 Vermillion Red, 6MT [SOLD] 2008 BMW M3 E92 Alpine White, 6MT
	Appreciate 0 Quote

03-11-2014, 09:37 PM	#95
blau335 New Member 0 Rep 11 Posts Drives: 2009 E90 335i Join Date: Oct 2013 Location: AL/FL iTrader: (1)	Newb here. Assuming my car is ready, I'll be at Cars and Coffee __________________ 2009 E90 335i Monaco Blue/Saddle. Sport, Premium, Cold Weather, Navi, JB4, LUX, Michelin Super Sport
	Appreciate 0 Quote

03-19-2014, 05:20 PM	#96
Datsik Lieutenant 23 Rep 522 Posts Drives: 2011 E90 M3 DCT Join Date: Apr 2013 Location: Birmingham iTrader: (3)	Here's the Ferrari Enzo and F40 that have been at Cars and Coffee the past two weekends Attached Images __________________ 2011 Alpine White/Black E90 M3 Competition, Technology, Premium Sound, Cold Weather, Comfort
	Appreciate 0 Quote

03-19-2014, 08:35 PM	#97
JazStar740 Private First Class 11 Rep 175 Posts Drives: 2018 F31 330XI/2011 E93 335is Join Date: Sep 2011 Location: Wetumpka, AL iTrader: (0)	While at BMW of Montgomery today I saw a E92 328i wrapped in a flat red.... Did not they had someone here in Montgomery wrapping cars. __________________ 2011 E93 335is / BSM / Coral Red / 6MT / NAV / HK L7 / BSW Stage One / SWS8's 1994 E32 740iL / Black / Black 2008 E85 Z4 / Stratus Grey / Dream Red SOLD / 2006 E90 325i / Jet Black / Black SOLD / 2001 E53 X5 / Silver / Grey SOLD
	Appreciate 0 Quote

04-03-2014, 06:03 PM	#99
avol3xo Captain 63 Rep 733 Posts Drives: 2008 E92 M3 Join Date: Jul 2012 Location: Atlanta, GA iTrader: (1) Garage List 2008 BMW [0.00]	Anyone coming to Cars and Coffee Montgomery this saturday? __________________ 2011 BMW 335i E92 Vermillion Red, 6MT [SOLD] 2008 BMW M3 E92 Alpine White, 6MT
	Appreciate 0 Quote

04-16-2014, 09:33 AM	#102
SLEEP3R Private 7 Rep 66 Posts Drives: 2009 e92 335i Join Date: Jun 2013 Location: Huntsville, AL iTrader: (1)	Anyone in Alabama that has done jb4 install and remove? preferably closer to Huntsville area. I got my 335i with the jb4 installed and liked it for a while but decided to go the cobb route. and i love acessport 100x better IMO. But now i want to remove the jb4 (so i can sell it and get some extra cash for my new exhaust). I have seen the install videos and read on the forums but becuase i actually never did the install in the first place, looking at all the wires looks a bit intimidating. So was wanting to get some experinced help. Any suggestions would be greatly appriecated. Thx.
	Appreciate 0 Quote

07-23-2014, 11:01 AM	#103
thecrc New Member 0 Rep 12 Posts Drives: 335i Join Date: Oct 2011 Location: United States iTrader: (0)	Anybody going to Cars and Coffee this Saturday? I still haven't been but am going to go this weekend to check it out, weather permitting.
	Appreciate 0 Quote

07-24-2014, 04:42 PM	#105
Bamaben Major 183 Rep 1,082 Posts Drives: 07 335i blk/blk/alum 6MT Join Date: Jun 2010 Location: Bimmertown iTrader: (0)	https://m.facebook.com/BhmCarsCoffee __________________ It takes a big man to cry. It takes an even bigger man to laugh at him-- Jack Handey mods: blackout grill, finishing rods, badges, Blacklines.
	Appreciate 0 Quote

08-04-2014, 01:28 PM	#106
KhelMP2013 Private 2 Rep 78 Posts Drives: 07 335i Join Date: Dec 2013 Location: Birmingham, AL iTrader: (0)	Does anyone know a quality auto electrician or non-dealer shop that can diagnose or repair a faulty DME? A misfire that I originally thought might just be a bad injector now seems to lead to a failed DME. It seems a lot of guys on the forums are having this issue with a certain production date in mid 2007. One or more MOSFET transistors within the DME burn out and cause erratic injector behavior. It is warrantied by federal emmisions standards till 80,000 miles but I just passed that mark, so it looks like it will be up to $3,000 at the dealer for a replacement. But fortunately this can be repaired with a $2 transistor, from what I have been reading. I have soldered in the past, but don't trust myself with something this important.
	Appreciate 0 Quote

08-04-2014, 03:04 PM	#108
KhelMP2013 Private 2 Rep 78 Posts Drives: 07 335i Join Date: Dec 2013 Location: Birmingham, AL iTrader: (0)	E-mail sent! Running JB4 piggy-back for about 5 months. Pulling a 30ba code (DME internal failure) and sporadic misfires from mostly cylinder 2, but also others at times. Engine fires up with noticeable misfire on single cylinder, then loses all power and stalls between 5-10 seconds. Fortunately I can ride the motorcycle to work in the meantime, but it's definitely a bit warm with my full suit and tie outfit.
	Appreciate 0 Quote

12-31-2019, 07:42 AM	#109
5tony Lieutenant 156 Rep 508 Posts Drives: '21 M5/'15 X5 35i/'88 M3 Join Date: Jul 2010 Location: Atlanta iTrader: (1)	Can someone recommend a good window tint shop in the Birmingham area? Need to replace some scratched and bubbling tint. __________________
	Appreciate 0 Quote

03-09-2020, 01:30 PM	#110
speedeep Registered 0 Rep 3 Posts Drives: 2011 BMW 335d Join Date: Feb 2020 Location: Central Alabama iTrader: (0)	New to the forum, recently acquired 2011 BMW 335D. 57k miles, JBD piggyback Near Prattville. Anybody from metro Montgomery head(ing) up to Cars and Coffee in Birmingham?
	Appreciate 0 Quote