HP Autowerks Adjustable Swaybar Endlinks

mbanks21 · 03-07-2014, 08:14 AM

Quote:

Originally Posted by yEBMW

Have some m3 front and rear sway bars but the seller didn't have the m3 stabilizer link/end link. Will I be able to use my existing endlinks or will I need to get something like these? Also sent you a pm. I have a 2011 e90 335i

I have the same question. I'll be lowered about an 1-1.2" on ST coilovers and I'm looking at the M3 front swaybar, are these necessary?

yEBMW · 03-08-2014, 11:53 AM

Quote:

Originally Posted by mbanks21

I have the same question. I'll be lowered about an 1-1.2" on ST coilovers and I'm looking at the M3 front swaybar, are these necessary?

The guy from hpa got back to me and said it would be a good idea. So I'm going to get them.

mbanks21 · 03-26-2014, 09:07 AM

So I installed my ST Coilovers 2 weeks ago and yesterday I'm getting the "click clack" noise occasionally from the front. I think I need to order these asap

HP Autosport · 03-26-2014, 12:47 PM

Quote:

Originally Posted by mbanks21

So I installed my ST Coilovers 2 weeks ago and yesterday I'm getting the "click clack" noise occasionally from the front. I think I need to order these asap

Yes, could be links, but you will need to confirm.

mbanks21 · 03-26-2014, 01:08 PM

Whats the easiest way to confirm it's the endlinks?

HP Autosport · 03-31-2014, 12:23 AM

Quote:

Originally Posted by mbanks21

Whats the easiest way to confirm it's the endlinks?

Disconnect and remove them one side at a time and go for a test drive.

lmoretti · 04-01-2014, 10:30 AM

Im also having the same issue (I PM'ed you before I could find this thread). IM trying to understand if I need adjustable or just new stock (Miley HD). I'm lowered on HR Sport springs with stock struts and now I have a clanking noise over bumps in the front right. Should I go adjustable or no? After reading IM pretty sure I installed them wrong (didn't have load on the tire).. Any input is appreciated or brands of links to purchase. Thanks

lmoretti · 04-01-2014, 11:16 AM

Anyone know how to get a hold opt HP to order? Called two number and they didn't work. Thanks

mbanks21 · 04-01-2014, 11:29 AM

Quote:

Originally Posted by lmoretti

Im also having the same issue (I PM'ed you before I could find this thread). IM trying to understand if I need adjustable or just new stock (Miley HD). I'm lowered on HR Sport springs with stock struts and now I have a clanking noise over bumps in the front right. Should I go adjustable or no? After reading IM pretty sure I installed them wrong (didn't have load on the tire).. Any input is appreciated or brands of links to purchase. Thanks

Something could be loose if you didn't tighten the control arms with load on them. You could retighten everything or remove the end links as suggested above

lmoretti · 04-01-2014, 11:31 AM

Quote:

Originally Posted by mbanks21

Quote:

Originally Posted by lmoretti

Im also having the same issue (I PM'ed you before I could find this thread). IM trying to understand if I need adjustable or just new stock (Miley HD). I'm lowered on HR Sport springs with stock struts and now I have a clanking noise over bumps in the front right. Should I go adjustable or no? After reading IM pretty sure I installed them wrong (didn't have load on the tire).. Any input is appreciated or brands of links to purchase. Thanks

Something could be loose if you didn't tighten the control arms with load on them. You could retighten everything or remove the end links as suggested above

Thanks but I didn't touch anything in the control arms.. You meant sway bar end links, right?

mbanks21 · 04-01-2014, 12:02 PM

Quote:

Originally Posted by lmoretti

Thanks but I didn't touch anything in the control arms.. You meant sway bar end links, right?

You didnt loosen the control arm to install the springs? I'd suggest loading the suspension and checking every bolt you can find before you pay $160 for new endlinks

lmoretti · 04-01-2014, 12:08 PM

I did not

ok I'll just have to start over and check everything

lmoretti · 04-01-2014, 12:47 PM

Quote:

Originally Posted by mbanks21

Quote:

Originally Posted by lmoretti

Thanks but I didn't touch anything in the control arms.. You meant sway bar end links, right?

You didnt loosen the control arm to install the springs? I'd suggest loading the suspension and checking every bolt you can find before you pay $160 for new endlinks

Oh and btw I did do that for the rears, I'm having issues in the front only and specific right front. I ordered some new meyle HD links for the front and will replace and button everything up

HP Autosport · 04-09-2014, 06:33 PM

Quote:

Originally Posted by lmoretti

Oh and btw I did do that for the rears, I'm having issues in the front only and specific right front. I ordered some new meyle HD links for the front and will replace and button everything up

PM replied!

HP Autosport · 07-10-2014, 04:11 PM

Bump!

TurboBimmer · 08-07-2014, 03:18 AM

My shop tells me I need shorter endlinks as stock won't fit with Öhlins R/T coilovers and M3 ARB. Does any one know the recommended length for my setup?

HP Autosport · 08-07-2014, 11:46 PM

Quote:

Originally Posted by Autobahn335i

My shop tells me I need shorter endlinks as stock won't fit with Öhlins R/T coilovers and M3 ARB. Does any one know the recommended length for my setup?

That is not true. The OE links will fit the Ohlins R&T and OE or E9x M3 anti roll bar without any issues.

TurboBimmer · 08-08-2014, 01:27 AM

Quote:

Originally Posted by HP Autosport

That is not true. The OE links will fit the Ohlins R&T and OE or E9x M3 anti roll bar without any issues.

Indeed, turned out that I had M3 endlinks, which are a tad longer. Yesterday we put in OE endlinks and they fit. Would you still recommend shorter links for proper ARB positioning?

HP Autosport · 08-08-2014, 02:31 AM

Quote:

Originally Posted by Autobahn335i

Indeed, turned out that I had M3 endlinks, which are a tad longer. Yesterday we put in OE endlinks and they fit. Would you still recommend shorter links for proper ARB positioning?

Well, shorter than OE M3, but longer than OE 135/335 would be ideal. If you are OE end links, they will work fine as well until you can get adjustable/longer ones for improved geometry.

HP Autosport · 01-30-2015, 02:53 PM

bump

HP Autosport · 04-06-2015, 03:08 PM

bump

dbltakegs3 · 04-07-2015, 01:39 PM

Harold,

I have PSS9 and pretty much have the car dumped to the ground on my 2007 E90 335i. Would you suggest stock size 11.5? and is 1.25 adjustment length enough. I'm about to order on your website. Thanks

03-26-2014, 09:07 AM	#91
mbanks21 Colonel 1281 Rep 2,962 Posts Drives: 2015 335i MSport Join Date: Aug 2013 Location: High Bridge, NJ iTrader: (8)	So I installed my ST Coilovers 2 weeks ago and yesterday I'm getting the "click clack" noise occasionally from the front. I think I need to order these asap
	Appreciate 0

03-26-2014, 01:08 PM	#93
mbanks21 Colonel 1281 Rep 2,962 Posts Drives: 2015 335i MSport Join Date: Aug 2013 Location: High Bridge, NJ iTrader: (8)	Whats the easiest way to confirm it's the endlinks?
	Appreciate 0

04-01-2014, 10:30 AM	#95
lmoretti First Lieutenant 27 Rep 372 Posts Drives: 2015 F80 YMB Join Date: Sep 2012 Location: Orlando, FL iTrader: (2)	Im also having the same issue (I PM'ed you before I could find this thread). IM trying to understand if I need adjustable or just new stock (Miley HD). I'm lowered on HR Sport springs with stock struts and now I have a clanking noise over bumps in the front right. Should I go adjustable or no? After reading IM pretty sure I installed them wrong (didn't have load on the tire).. Any input is appreciated or brands of links to purchase. Thanks
	Appreciate 0

04-01-2014, 11:16 AM	#96
lmoretti First Lieutenant 27 Rep 372 Posts Drives: 2015 F80 YMB Join Date: Sep 2012 Location: Orlando, FL iTrader: (2)	Anyone know how to get a hold opt HP to order? Called two number and they didn't work. Thanks
	Appreciate 0

04-01-2014, 12:08 PM	#100
lmoretti First Lieutenant 27 Rep 372 Posts Drives: 2015 F80 YMB Join Date: Sep 2012 Location: Orlando, FL iTrader: (2)	I did not ok I'll just have to start over and check everything __________________ 2007 E92 335i - SOLD 2008 E92 335i - SOLD 2008 G37S - SOLD 2005 G35S - SOLD 1988 RX7 TURBO II - SOLD but never forgotten
	Appreciate 0

07-10-2014, 04:11 PM	#103
HP Autosport Supreme Allied Commander 4091 Rep 55,819 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Bump!
	Appreciate 0

08-07-2014, 03:18 AM	#104
TurboBimmer Lieutenant Colonel 78 Rep 1,617 Posts Drives: F82 M4 Join Date: Mar 2009 Location: Luxembourg iTrader: (5)	My shop tells me I need shorter endlinks as stock won't fit with Öhlins R/T coilovers and M3 ARB. Does any one know the recommended length for my setup?
	Appreciate 0

01-30-2015, 02:53 PM	#108
HP Autosport Supreme Allied Commander 4091 Rep 55,819 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0

04-06-2015, 03:08 PM	#109
HP Autosport Supreme Allied Commander 4091 Rep 55,819 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0

04-07-2015, 01:39 PM	#110
dbltakegs3 Private First Class 3 Rep 143 Posts Drives: 2007 335i sedan a22 Join Date: Nov 2008 Location: Chi, IL iTrader: (1) Garage List 2007 BMW 335i [0.00]	Adjustable Swaybar Endlinks Harold, I have PSS9 and pretty much have the car dumped to the ground on my 2007 E90 335i. Would you suggest stock size 11.5? and is 1.25 adjustment length enough. I'm about to order on your website. Thanks
	Appreciate 0