[CarAbuser]

Originally Posted by 6ixSpd

Anyone? Looking to do the same on a 2010 N54 as well. I don't want to tune the car for power or any Stage 2, just disable the CEL for the catless DPs.

It's pretty clear in the XDF files.

Reduce all the cells in the cold start duration table to 0 then disable the two diagnostic codes for cat monitoring (29F4 29F5)

[6ixSpd]

Originally Posted by CarAbuser

It's pretty clear in the XDF files.

Reduce all the cells in the cold start duration table to 0 then disable the two diagnostic codes for cat monitoring (29F4 29F5)

Issue was the IJE0S XDF in the OP's link does not contain the Toggles for those two DTCs. I found another XDF on the "other" side that is much more comprehensive

[bernardo774]

Originally Posted by 6ixSpd

Issue was the IJE0S XDF in the OP's link does not contain the Toggles for those two DTCs. I found another XDF on the "other" side that is much more comprehensive

can you share this xdf?

i found the RFP xdf, have somethings news

[kulakv]

Hello. Can anyone tell what tables to modify to delete the "soft rev limiter"