Rolling Gears headlights

mybimmerlife · 03-01-2016, 09:26 PM

Quote:

Originally Posted by Ruddigger

I had it coded. Angel eyes on at all times, amber only comes on as turn signals. Looks so much better.

How much did it cost to have the coding done?

Ruddigger · 03-01-2016, 10:07 PM

60 bucks.

Ruddigger · 03-02-2016, 06:09 PM

As further update, I was sent a replacement set of headlights. I've had them on for a day, error free so far. The real test will be if they work in the morning.

94marcus · 03-03-2016, 01:06 PM

is the eBay seller that autonet15 person?

335iAP · 03-03-2016, 03:06 PM

Wish they'd make something similar for e92s

94marcus · 03-03-2016, 04:40 PM

Quote:

Originally Posted by 335iAP

Wish they'd make something similar for e92s

I think they do check out Mars performance

Ruddigger · 03-03-2016, 04:41 PM

Quote:

Originally Posted by 94marcus

is the eBay seller that autonet15 person?

Shopauto247 or something like that.

All lights still functioned this morning, havent had an error yet with the new set. Fingers crossed.

xyaaeg234g234 · 03-04-2016, 12:56 AM

Has anyone found similar headlights to these that'll work on an 09 e90 335i lci w/xenon AHL? The ones sold by shopauto all say that they don't have auto-level control.

I'm not even sure if I'd lose anything with that? Is the auto-leveling 100% necessary? Sorry for the dummy questions, just got the car a week ago and still learning about the bells & whistles!

Ali-E90 · 03-04-2016, 01:44 AM

Quote:

Originally Posted by prodigymix

Has anyone found similar headlights to these that'll work on an 09 e90 335i lci w/xenon AHL? The ones sold by shopauto all say that they don't have auto-level control.

I'm not even sure if I'd lose anything with that? Is the auto-leveling 100% necessary? Sorry for the dummy questions, just got the car a week ago and still learning about the bells & whistles!

Oem xenons are much higher quality than these or most aftermarket lights.

Not sure these even fit xenon cars, but even if so, light output would be much worse than oem. Of course the halos would look cool though.

The better options are to get brighter bulbs for your current halos, or retrofit different rings into your current headlights.

xyaaeg234g234 · 03-04-2016, 02:07 AM

Quote:

Originally Posted by Ali-323i

Oem xenons are much higher quality than three or most aftermarket lights.

Not sure these even fit xenon cars, but even if so, light output would be much worse than oem. Of course the halos would look cool though.

The better options are to get brighter bulbs for your current halos, or retrofit different rings into your current headlights.

Awesome - thanks for the info! I already tossed some new bulbs in and while they're definitely whiter - they're just not that bright.

Plus, I really dig the DTM (Raptor?) or squared rings - and yeah a retrofit would be ideal if I wasn't a bumbling idiot who will find a way to break anything. I'd rather not try knowing how massively I'd fail... perhaps I'll see if anyone local is more experienced and mechanically skilled with such things.

b1mmr · 03-04-2016, 03:23 AM

Nice looking lights.. Only bad thing about leaving my oem's would be the cornering and auto level

Mike. · 03-05-2016, 12:05 PM

Quote:

Originally Posted by Ruddigger

Shopauto247 or something like that.

All lights still functioned this morning, havent had an error yet with the new set. Fingers crossed.

any new updates?

Ruddigger · 03-05-2016, 02:31 PM

So far so good. I also used a bunch of electrical tape around all the wire connections before installing, I don't know if that helped it or not. I have now emailed the seller about the tail lights I bought from them at the same time. The turn signal LEDs dont all light up, only about half of them do. Lol.

Mike. · 03-05-2016, 02:38 PM

Quote:

Originally Posted by Ruddigger

So far so good. I also used a bunch of electrical tape around all the wire connections before installing, I don't know if that helped it or not. I have now emailed the seller about the tail lights I bought from them at the same time. The turn signal LEDs dont all light up, only about half of them do. Lol.

yeah...love when that happens

GSTiDDY · 03-06-2016, 08:22 PM

Can anyone tell me where the leveling adjuster is for the low beams? I just put the hids, makes a world of a diff jus need to level them off.

Ruddigger · 03-06-2016, 09:20 PM

Its the twisty brass knob hat sticks way out.

Ali-E90 · 03-06-2016, 09:47 PM

Quote:

Originally Posted by GSTiDDY

Can anyone tell me where the leveling adjuster is for the low beams? I just put the hids, makes a world of a diff jus need to level them off.

Light output looks great in the pic. Is it sufficient now that you don't feel out of place when next to a high end car with factory xenons?

GSTiDDY · 03-06-2016, 09:59 PM

Quote:

Originally Posted by Ruddigger

Its the twisty brass knob hat sticks way out.

Not sure if I could see it. Is it accessible from the engine bay while mounted on?

GSTiDDY · 03-06-2016, 10:01 PM

Quote:

Originally Posted by Ali-323i

Light output looks great in the pic. Is it sufficient now that you don't feel out of place when next to a high end car with factory xenons?

Feels fuckin great! Lol, the hids def make the car feel more luxurious esp with the DTM angel eyes

Mike. · 03-06-2016, 10:21 PM

Quote:

Originally Posted by GSTiDDY

Feels fuckin great! Lol, the hids def make the car feel more luxurious esp with the DTM angel eyes

any leds burn out yet?

GSTiDDY · 03-06-2016, 10:25 PM

Quote:

Originally Posted by Mike.

any leds burn out yet?

So far so good

Ruddigger · 03-06-2016, 10:54 PM

Quote:

Originally Posted by GSTiDDY

Not sure if I could see it. Is it accessible from the engine bay while mounted on?

Yeah, for sure. It's super long. When I'm by my car again I'll take a picture. It takes an 8mm socket.

Looks great, btw.

03-01-2016, 10:07 PM	#90
Ruddigger Major 696 Rep 1,302 Posts Drives: 2012 E91 Join Date: Aug 2015 Location: SoCal iTrader: (0)	60 bucks. __________________ My build thread. It's a wagon with stuff on it.
	Appreciate 0 Quote

03-02-2016, 06:09 PM	#91
Ruddigger Major 696 Rep 1,302 Posts Drives: 2012 E91 Join Date: Aug 2015 Location: SoCal iTrader: (0)	As further update, I was sent a replacement set of headlights. I've had them on for a day, error free so far. The real test will be if they work in the morning. __________________ My build thread. It's a wagon with stuff on it.
	Appreciate 0 Quote

03-03-2016, 01:06 PM	#92
94marcus Private First Class 16 Rep 145 Posts Drives: 09 328i 6MT Join Date: Jun 2014 Location: san diego iTrader: (0)	is the eBay seller that autonet15 person? __________________ Charcoal Delete // K&N Drop In // Cyba Air Scoops // OEM SSK // AA Stage 2 Tune // BC Coils // Apex Arc-8 18X9.5 255/35/18 //
	Appreciate 0 Quote

03-03-2016, 03:06 PM	#93
335iAP Captain 149 Rep 921 Posts Drives: AW E92 & F26 Join Date: Jul 2011 Location: United States iTrader: (0)	Wish they'd make something similar for e92s
	Appreciate 0 Quote

03-04-2016, 12:56 AM	#96
xyaaeg234g234 happy. 139 Rep 464 Posts Drives: 2009 e90 335i Join Date: Jun 2009 Location: palm beach county iTrader: (4)	Has anyone found similar headlights to these that'll work on an 09 e90 335i lci w/xenon AHL? The ones sold by shopauto all say that they don't have auto-level control. I'm not even sure if I'd lose anything with that? Is the auto-leveling 100% necessary? Sorry for the dummy questions, just got the car a week ago and still learning about the bells & whistles! __________________ '09 Jet Black E90 335i \| BMS DCI \| Forge DV \| VRSF CP, DP, 7" FMIC, Exhaust \| MHD Stg 2 / 93 Oct \| Koni Yellow / H&R Sport \| Mooooarrrrrr this list is getting too long.....
	Appreciate 0 Quote

03-04-2016, 03:23 AM	#99
b1mmr Major 320 Rep 891 Posts Drives: 2008 335XI E90 Join Date: Jun 2015 Location: Ohio iTrader: (0)	Nice looking lights.. Only bad thing about leaving my oem's would be the cornering and auto level __________________ Formerly Ian_N54 - @b1mmr
	Appreciate 0 Quote

03-05-2016, 02:31 PM	#101
Ruddigger Major 696 Rep 1,302 Posts Drives: 2012 E91 Join Date: Aug 2015 Location: SoCal iTrader: (0)	So far so good. I also used a bunch of electrical tape around all the wire connections before installing, I don't know if that helped it or not. I have now emailed the seller about the tail lights I bought from them at the same time. The turn signal LEDs dont all light up, only about half of them do. Lol. __________________ My build thread. It's a wagon with stuff on it.
	Appreciate 0 Quote

03-06-2016, 08:22 PM	#103
GSTiDDY Second Lieutenant 77 Rep 243 Posts Drives: 328XI Join Date: May 2015 Location: Strong Island, NY iTrader: (1)	Can anyone tell me where the leveling adjuster is for the low beams? I just put the hids, makes a world of a diff jus need to level them off. Attached Images
	Appreciate 0 Quote

03-06-2016, 09:20 PM	#104
Ruddigger Major 696 Rep 1,302 Posts Drives: 2012 E91 Join Date: Aug 2015 Location: SoCal iTrader: (0)	Its the twisty brass knob hat sticks way out. __________________ My build thread. It's a wagon with stuff on it.
	Appreciate 0 Quote