**Riss Racing** Black Oil Catch Can! (New product release!!!)

Adam@Riss Racing · 06-29-2008, 05:50 AM

Quote:

Originally Posted by hunter399

Where are the DIYs located on your site?

Not on the site yet Hunter,

its on the first post in this thread. Below the pictures. All the beginning pictures are the same for even a tune. We're getting a DIY video up as well just to simplify things even more!

marcvtec · 06-29-2008, 04:11 PM

Quote:

Originally Posted by Adam@Riss Racing

Hi Marc,

just want to make sure you were taken care of. We sent a lot of PM's out and I want to make sure we didn't miss you!

Ya you missed me lol, and I forgot about it lol
Please send PM for N54 kit in black
Cheers

Riss Racing · 06-29-2008, 05:05 PM

Quote:

Originally Posted by marcvtec

Ya you missed me lol, and I forgot about it lol
Please send PM for N54 kit in black
Cheers

If you didn't get it yet please PM me your E-Mail address. Thanks!

Riss Racing · 06-30-2008, 05:58 PM

A lot more went out today you will have a shipping confirmation in your email. Thanks!

Hunter399 · 06-30-2008, 07:35 PM

Got my tracking number today

Very excited!

Thanks guys

Adam@Riss Racing · 06-30-2008, 07:38 PM

Quote:

Originally Posted by hunter399

Got my tracking number today

Very excited!

Thanks guys

Thank you Hunter!

We shipped the 2nd batch today so everybody should have a tracking number by now!

Vicko · 06-30-2008, 08:34 PM

Quote:

Originally Posted by Adam@Riss Racing

Thank you Hunter!

We shipped the 2nd batch today so everybody should have a tracking number by now!

Got mine, thanks!

Riss Racing · 07-01-2008, 02:00 AM

They have all gone out. Everybody should have a tracking number. If you do not please PM Adam@Riss Racing to make sure you get one.

For those of you that bought early thank you, and you were rewarded with FREE N54 KITs! That being said, The N54 kit WILL NO LONGER BE FREE.

Thew new site should be finished tomorrow or the following day and the catch cans will be available for purchase there. If you want to order now please PM me for an invoice. Thanks, and enjoy

jgalaxy · 07-01-2008, 04:25 AM

I installed mine today. Not much room in there. I could not install on the nut next to the washer.

To be able to install on the 10mm nut next to the washer fluid I would have to fab another 'L' bracket. The only 'L' bracket that came with the CC only attaches to CC. Is there a bracket that is missing. The DIY seems to show another smaller 'L' bracket that attaches to the CC's 'L' bracket that my kit didn't come with (Picture below). I had to attach to the heat shield itself. Fits, but real tight.

I noticed that my oil temp is now running about 17C (31F) hotter than it was normally. Could that be due to it's proximity to the turbos?

Any help would be appreciated.

Riss Racing · 07-01-2008, 04:32 AM

Quote:

Originally Posted by jgalaxy

I installed mine today. Not much room in there. I noticed that my oil temp is now running about 17C (31F) hotter than it was normally. Could that be due to it's proximity to the turbos?

Not sure how you installed yours today? Today was the FIRST day we sent any N54 kits intermational, and nobody has yet recieved their N54 kit here in the states? So unless you took the one off my car I'm not sure how you installed it unless your talking about the old CC that did not have an N54 specific kit, and to mount it there you would need to have hand made a bracket....?

All this being said there is no gain or drop in oil temp. Where the can is placed would make no difference since fluid thats in the can doesnt go back into the eng. It is simply an Oil Catch Can.

v2bling · 07-05-2008, 04:38 AM

EVERY N54 engine should have this oil catch can. The oil really does sludge up and build up on stuff thats not suppose to have oil on it. I bought one and am installing mine tomm ! Im so exited. Ill take a few rips on my illadelph and install it. Ill do a review on it. Protect your expensive motor please

Adam@Riss Racing · 07-05-2008, 07:07 AM

Quote:

Originally Posted by v2bling

EVERY N54 engine should have this oil catch can. The oil really does sludge up and build up on stuff thats not suppose to have oil on it. I bought one and am installing mine tomm ! Im so exited. Ill take a few rips on my illadelph and install it. Ill do a review on it. Protect your expensive motor please

Thank you so much. I am sure there are a ton of people who will appreciate your review! I just put up a thread a few min. ago in regards to the catch can and if it is needed. The thread has tons of references of customers who have seen the oil themselves. In some instances, there were small puddles of oil inside the charge pipes. Lets keep our engines running clean!

Hunter399 · 07-05-2008, 01:40 PM

Got mine in the mail thursday!

Cant wait for install on monday!

Thanks Riss

Adam@Riss Racing · 07-05-2008, 03:31 PM

Quote:

Originally Posted by hunter399

Got mine in the mail thursday!

Cant wait for install on monday!

Thanks Riss

Thank you Hunter!

Can't wait to see some pics!

NM_BMW · 07-06-2008, 01:48 PM

Got mine on Thursday too!! Was gonna install this weekend, but planning on doing this tomorrow. I'll post some pics when finished. BTW the N54 kit is perfect! Awesome work. I've mentioned this CC to a few Evo and Supra buddies. They'll be ordering it as well as it is priced very low for such a great can.

i2iSTUDIOS · 07-13-2008, 11:46 PM

Quote:

Originally Posted by jgalaxy

I installed mine today. Not much room in there. I could not install on the nut next to the washer.

To be able to install on the 10mm nut next to the washer fluid I would have to fab another 'L' bracket. The only 'L' bracket that came with the CC only attaches to CC. Is there a bracket that is missing. The DIY seems to show another smaller 'L' bracket that attaches to the CC's 'L' bracket that my kit didn't come with (Picture below). I had to attach to the heat shield itself. Fits, but real tight.

I noticed that my oil temp is now running about 17C (31F) hotter than it was normally. Could that be due to it's proximity to the turbos?

Any help would be appreciated.

31 Degrees is HUGE, we're already running at 240 degrees. Others please post if you are seeing similar results. We might need to put heat wrap on this this if the turbos are causing an increase in heat. Extra heat = extra wear on the engine in the long run.

davedave · 07-13-2008, 11:49 PM

does it fits 03 Evo? PM me info thanks

e90AW335i · 07-14-2008, 08:04 AM

Here are some pics of it installed on my car (dirty engine bay...I know):

Name: IMG_0648.jpg
Views: 303
Size: 77.3 KB

Name: IMG_0649.jpg
Views: 297
Size: 77.5 KB

Name: IMG_0650.jpg
Views: 287
Size: 68.4 KB

Name: IMG_0651.jpg
Views: 294
Size: 61.3 KB

Name: IMG_0652.jpg
Views: 287
Size: 60.5 KB

Name: IMG_0653.jpg
Views: 287
Size: 53.1 KB

Name: IMG_0654.jpg
Views: 293
Size: 60.1 KB

rustyrotors · 07-14-2008, 08:36 AM

How do you empty the Catch Can once it starts to fill up with oil?

Adam@Riss Racing · 07-14-2008, 07:43 PM

Quote:

Originally Posted by rustyrotors

How do you empty the Catch Can once it starts to fill up with oil?

There is a drain plug at the bottom of the canister. That way, when you need to empty, just take the 2 bolts off the bracket and dump.

ducati955 · 07-15-2008, 07:22 AM

Quote:

Originally Posted by Adam@Riss Racing

There is a drain plug at the bottom of the canister. That way, when you need to empty, just take the 2 bolts off the bracket and dump.

every how many number of miles do we empty it?

raceyBMW · 07-15-2008, 01:39 PM

They have a level guage on the side of the can that you can just keep and eye on yourself and empty when needed.

06-30-2008, 05:58 PM	#92
Riss Racing Banned 278 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	A lot more went out today you will have a shipping confirmation in your email. Thanks!
	Appreciate 0 Quote

06-30-2008, 07:35 PM	#93
Hunter399 Major General 336 Rep 8,088 Posts Drives: F90M5 Join Date: Apr 2005 Location: Houston, TX iTrader: (33)	Got my tracking number today Very excited! Thanks guys
	Appreciate 0 Quote

07-01-2008, 02:00 AM	#96
Riss Racing Banned 278 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	Oil Catch Can Update (black) They have all gone out. Everybody should have a tracking number. If you do not please PM Adam@Riss Racing to make sure you get one. For those of you that bought early thank you, and you were rewarded with FREE N54 KITs! That being said, The N54 kit WILL NO LONGER BE FREE. Thew new site should be finished tomorrow or the following day and the catch cans will be available for purchase there. If you want to order now please PM me for an invoice. Thanks, and enjoy
	Appreciate 0 Quote

07-01-2008, 04:25 AM	#97
jgalaxy Gearing 87 Rep 3,962 Posts Drives: E46 M3, F22 M240 Join Date: Oct 2006 Location: Out East Canada iTrader: (3)	I installed mine today. Not much room in there. I could not install on the nut next to the washer. To be able to install on the 10mm nut next to the washer fluid I would have to fab another 'L' bracket. The only 'L' bracket that came with the CC only attaches to CC. Is there a bracket that is missing. The DIY seems to show another smaller 'L' bracket that attaches to the CC's 'L' bracket that my kit didn't come with (Picture below). I had to attach to the heat shield itself. Fits, but real tight. I noticed that my oil temp is now running about 17C (31F) hotter than it was normally. Could that be due to it's proximity to the turbos? Any help would be appreciated. Attached Images __________________ If at first you don't succeed ... Last edited by jgalaxy; 07-01-2008 at 04:56 AM..
	Appreciate 0 Quote

07-05-2008, 04:38 AM	#99
v2bling First Lieutenant 7 Rep 301 Posts Drives: speed demon Join Date: Dec 2007 Location: Mansfield,tx iTrader: (0)	EVERY N54 engine should have this oil catch can. The oil really does sludge up and build up on stuff thats not suppose to have oil on it. I bought one and am installing mine tomm ! Im so exited. Ill take a few rips on my illadelph and install it. Ill do a review on it. Protect your expensive motor please __________________ 535i - Black Sapphire/Black Dakota/Bamboo/AnthraciteHeadliner/M-Tech Kit/Spoiler/Sports/Premium/Navi/HUD/Comfort/Rear Shades/ParkDistance/Ipod/Sports Auto w/Paddle/Logik7/30% Tint/Clear Bra/KW3/ Radenergie rs10 20"/Defi RedRacer Psi/Smoked front reflectors/ LED interior lights Soon: Rpi Catback, GIAC or EVOtech flash, Dinan Rear Strut, OEM M5 Mirrors
	Appreciate 0 Quote

07-05-2008, 01:40 PM	#101
Hunter399 Major General 336 Rep 8,088 Posts Drives: F90M5 Join Date: Apr 2005 Location: Houston, TX iTrader: (33)	Got mine in the mail thursday! Cant wait for install on monday! Thanks Riss
	Appreciate 0 Quote

07-06-2008, 01:48 PM	#103
NM_BMW Vishnu Powered 74 Rep 2,205 Posts Drives: 335xi, S1000RR Join Date: Nov 2007 Location: Proceding iTrader: (7)	Got mine on Thursday too!! Was gonna install this weekend, but planning on doing this tomorrow. I'll post some pics when finished. BTW the N54 kit is perfect! Awesome work. I've mentioned this CC to a few Evo and Supra buddies. They'll be ordering it as well as it is priced very low for such a great can. __________________ 2008 335xi Sedan \| Titanium Silver \| Black Dakota PROcede v5 \| Vishnu Exhaust \| BMS DCI \| AR Catless DPs \| Helix FMIC \| Stett Charge w/ Tial BOV \| MORR VS8s \| KWv3
	Appreciate 0 Quote

07-13-2008, 11:49 PM	#105
davedave Captain 44 Rep 787 Posts Drives: Godzilla Join Date: Jul 2007 Location: Somewhere iTrader: (7)	does it fits 03 Evo? PM me info thanks
	Appreciate 0 Quote

07-14-2008, 08:04 AM	#106
e90AW335i Major General 144 Rep 6,608 Posts Drives: e90 335i Join Date: Sep 2007 Location: ...... iTrader: (4)	Here are some pics of it installed on my car (dirty engine bay...I know): __________________ I install all tunes, intakes, o2 simms, and most cosmetic mods. PM me for a quote.
	Appreciate 0 Quote

07-14-2008, 08:36 AM	#107
rustyrotors Private 95 Rep 99 Posts Drives: BMW M4 Join Date: May 2008 Location: Philadelphia iTrader: (1)	How do you empty the Catch Can once it starts to fill up with oil?
	Appreciate 0 Quote

07-15-2008, 01:39 PM	#110
raceyBMW king of the hills 112 Rep 2,923 Posts Drives: 2011 M3 w/ESS55, 2001 540i/6 Join Date: Dec 2006 Location: Arvada, CO iTrader: (1) Garage List 2001 BMW 540i/6 [8.17] 1994 530i [9.00] 2007 335i Coupe [8.37]	They have a level guage on the side of the can that you can just keep and eye on yourself and empty when needed.
	Appreciate 0 Quote