Installation of the mods finally began!

Alpina_B3_Lux · 11-02-2009, 03:54 AM

Quote:

Originally Posted by edo

OK, time for some updates as I abandoned this thread a bit.

This time - installation of the VK Motorwerks Oil Cooler.
All I can say - the installation was such a big PITA and I was really dissapointed with the OC, as A LOT of cutting and trimming was needed, some parts of the OC needed to be cut off because of manufacturing failures, the hoses were way too stiff (I even thought that it would be impossible to install them, but we somehow managed to curl them), the OC was loose and wasn't holding in the bracket. If I knew it, I would've gone with ar desing OC.
But I've bought it, it's installed and here are the pics.

Great thread! Very informative. I'm happy I went with the ar design oil cooler, after seeing how difficult it was for you to make the install.

Thanks for your efforts!

Alpina_B3_Lux

P.S. What's next on your agenda?

edo · 11-02-2009, 04:18 AM

Quote:

Originally Posted by Alpina_B3_Lux

Great thread! Very informative.

Thanks.

Quote:

Originally Posted by Alpina_B3_Lux

P.S. What's next on your agenda?

Everything is installed already, I'll just post pics of Milltek exhaust installation shortly.

Ferre86 · 11-02-2009, 07:12 AM

Clean one!

mechanikas · 11-02-2009, 12:01 PM

Quote:

Originally Posted by edo

...I'll just post pics of Milltek exhaust installation shortly.

+ M Tech rear bumper with carbon diffuser

ar design · 11-02-2009, 12:07 PM

Quote:

Originally Posted by Alpina_B3_Lux

Great thread! Very informative. I'm happy I went with the ar design oil cooler, after seeing how difficult it was for you to make the install.

twinturbopg · 11-18-2009, 06:56 PM

really

thanks for the high quality pix plz keep in going, great mods too. btw your friend must really love working on cars and you gotta be hitting him back on the help. LOL I do the same with my brother in-law hahaha but not that advance mods yet, we shall see.

RevC · 11-18-2009, 09:08 PM

Quote:

Originally Posted by XPO186

Actually the Forge DVs are louder than stock... especially when boosting @ 12psi and above. Letting off the throttle quickly sounds almost like a BOV, but not as loud.

TRY AGAIN

edo · 11-29-2009, 12:11 PM

Time for some updates.

This time - installation of Milltek fully catless resonated exhaust system.

Here's the package that arrived:

The weight of the box:

Content of the box:

The stock exhaust:

Firstly the stock exhaust was taken off:

Sock exhaust off:

Milltek:

Putting it on and adjusting was PITA...

I was a bit dissappointed with the quality of production. To be specific - the hangers were welded inaccurately, the exhaust was hitting the "v brace" when driving over bumps, resonators touch each other. So we took the car to a friend's shop and some of the problems were solved (by bending the hangers, making a spacer).

There resonators still touch each other. I don't know if this is the reason, but there's some drone and vibration between 1,5 and 2k rpm.

ar design · 11-29-2009, 02:15 PM

Quote:

Originally Posted by edo

There resonators still touch each other. I don't know if this is the reason, but there's some drone and vibration between 1,5 and 2k rpm.

Yup, that'd be it.

edo · 11-29-2009, 02:27 PM

The thing that pisses me off is that it is impossible to make any space between the resonators... It's manufacturing fail.

vladster · 11-29-2009, 03:57 PM

Maybe try and wrap the resonators in some kind of heat resistant fabric.

mechanikas · 11-29-2009, 03:57 PM

It's strange, that fitment issue (space between resonators) is not eliminated. I always thought, that BMW is some kind of luxury cars and any noise or vibration, apart engine is not acceptable... but it can be fixed as well, it's possible to bend a little bit these pipes and weld them together, what would not let them vibrate and make noises.

mechanikas · 11-29-2009, 03:58 PM

Quote:

Originally Posted by vladster

Maybe try and wrap the resonators in some kind of heat resistant fabric.

There is not enough space for that

twinturbopg · 12-02-2009, 02:00 PM

Quote:

Originally Posted by mechanikas

It's strange, that fitment issue (space between resonators) is not eliminated. I always thought, that BMW is some kind of luxury cars and any noise or vibration, apart engine is not acceptable... but it can be fixed as well, it's possible to bend a little bit these pipes and weld them together, what would not let them vibrate and make noises.

to me that defeat's the purpose of purchasing that exhaust then. I would have personally sent it back and gave them the opportunity to send me back a fixed one or just get a different one.

twinturbopg · 12-02-2009, 02:02 PM

hey EDO thx for the high res pix of ur DCI install...I used those to help me install mine as well. It worked out just great!

edo · 12-02-2009, 02:44 PM

Quote:

Originally Posted by twinturbopg

hey EDO thx for the high res pix of ur DCI install...I used those to help me install mine as well. It worked out just great!

You're welcome.

enrita · 12-02-2009, 03:16 PM

wow luckily i got the resonated RennArt instead of the Milltek... was still not a perfect fit but no touching or resonation.

gt3fever · 12-02-2009, 03:38 PM

good to see you back edo !! looking forward to see some awesome vids from you soon.

as for the installation of milltek, the 2 resonators should be touched each other.
I remembered mine fits perfect as well.

doctor_vino · 12-02-2009, 04:05 PM

edo · 12-03-2009, 12:46 AM

Quote:

Originally Posted by hipertech

good to see you back edo !! looking forward to see some awesome vids from you soon.

as for the installation of milltek, the 2 resonators should be touched each other.
I remembered mine fits perfect as well.

Thanks. I'm braking-in the engine now, so videos will have to wait

So, your resonators touch each other or not?

gt3fever · 12-03-2009, 08:35 PM

Quote:

Originally Posted by edo

Thanks. I'm braking-in the engine now, so videos will have to wait

So, your resonators touch each other or not?

Nah... my installer even told me that fitment was decent.

but, the resonator will be pretty closed to the X bracket.

mechanikas · 12-04-2009, 09:52 AM

Quote:

Originally Posted by hipertech

Nah... my installer even told me that fitment was decent.

but, the resonator will be pretty closed to the X bracket.

What downpipes you have installed now?

11-02-2009, 07:12 AM	#91
Ferre86 Captain 39 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	Clean one! __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Quote

11-18-2009, 06:56 PM	#94
twinturbopg How you like them apples? 42 Rep 1,492 Posts Drives: 335i Join Date: Sep 2009 Location: SD & OC its where I belong iTrader: (5) Garage List 2007 BMW 335i [0.00]	really thanks for the high quality pix plz keep in going, great mods too. btw your friend must really love working on cars and you gotta be hitting him back on the help. LOL I do the same with my brother in-law hahaha but not that advance mods yet, we shall see. __________________ V5 rev2.5 \| VExhaust \| V1 KW \| V701 \| H&R Sway Bars \| Ram Air Scoops \| DCI WTB: stock mirror cover for pre-lci e90
	Appreciate 0 Quote

11-29-2009, 12:11 PM	#96
edo ****** 56 Rep 886 Posts Drives: E92 335i Join Date: Nov 2008 Location: hell iTrader: (1)	Time for some updates. This time - installation of Milltek fully catless resonated exhaust system. Here's the package that arrived: The weight of the box: Content of the box: The stock exhaust: Firstly the stock exhaust was taken off: Sock exhaust off: Milltek: Putting it on and adjusting was PITA... I was a bit dissappointed with the quality of production. To be specific - the hangers were welded inaccurately, the exhaust was hitting the "v brace" when driving over bumps, resonators touch each other. So we took the car to a friend's shop and some of the problems were solved (by bending the hangers, making a spacer). There resonators still touch each other. I don't know if this is the reason, but there's some drone and vibration between 1,5 and 2k rpm. __________________ Mods: RB turbos, JB4, BMS DCI, Scoops, Forge DVs, ar design catless DPs, Milltek exhaust system, Helix FMIC, Quaife LSD, VK MotorWerks OC Kit, Bilstein B16 PSS10
	Appreciate 0 Quote

11-29-2009, 02:27 PM	#98
edo ****** 56 Rep 886 Posts Drives: E92 335i Join Date: Nov 2008 Location: hell iTrader: (1)	The thing that pisses me off is that it is impossible to make any space between the resonators... It's manufacturing fail. __________________ Mods: RB turbos, JB4, BMS DCI, Scoops, Forge DVs, ar design catless DPs, Milltek exhaust system, Helix FMIC, Quaife LSD, VK MotorWerks OC Kit, Bilstein B16 PSS10
	Appreciate 0 Quote

11-29-2009, 03:57 PM	#99
vladster Private First Class 12 Rep 190 Posts Drives: BMW 335 ci Join Date: Mar 2007 Location: Slovenia iTrader: (0)	Maybe try and wrap the resonators in some kind of heat resistant fabric.
	Appreciate 0 Quote

11-29-2009, 03:57 PM	#100
mechanikas New Member 0 Rep 22 Posts Drives: Evo and my girlfriend crazy Join Date: Apr 2009 Location: My garage iTrader: (0)	It's strange, that fitment issue (space between resonators) is not eliminated. I always thought, that BMW is some kind of luxury cars and any noise or vibration, apart engine is not acceptable... but it can be fixed as well, it's possible to bend a little bit these pipes and weld them together, what would not let them vibrate and make noises.
	Appreciate 0 Quote

12-02-2009, 02:02 PM	#103
twinturbopg How you like them apples? 42 Rep 1,492 Posts Drives: 335i Join Date: Sep 2009 Location: SD & OC its where I belong iTrader: (5) Garage List 2007 BMW 335i [0.00]	hey EDO thx for the high res pix of ur DCI install...I used those to help me install mine as well. It worked out just great! __________________ V5 rev2.5 \| VExhaust \| V1 KW \| V701 \| H&R Sway Bars \| Ram Air Scoops \| DCI WTB: stock mirror cover for pre-lci e90
	Appreciate 0 Quote

12-02-2009, 03:16 PM	#105
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	wow luckily i got the resonated RennArt instead of the Milltek... was still not a perfect fit but no touching or resonation. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

12-02-2009, 03:38 PM	#106
gt3fever Major 79 Rep 1,232 Posts Drives: 992 GT3, G87 Join Date: Oct 2008 Location: Socal, Taiwan iTrader: (15)	good to see you back edo !! looking forward to see some awesome vids from you soon. as for the installation of milltek, the 2 resonators should be touched each other. I remembered mine fits perfect as well.
	Appreciate 0 Quote

12-02-2009, 04:05 PM	#107
doctor_vino Captain 39 Rep 802 Posts Drives: really slowly Join Date: May 2009 Location: Toronto, ON iTrader: (6)
	Appreciate 0 Quote