[cn555ic]

Originally Posted by Former_Boosted_IS

Props to the work, I just think it looks out of place personally. It's not like I am saying this was poorly done.

You have to actually see it in person to get a grasp of it, but just sit in a M series car and you will understand...I guess the M interior cluster is not up your alley either! But again I know its your own opinion....just like how I feel with the Stett charge piping

[Former_Boosted_IS]

Originally Posted by cn555ic

You have to actually see it in person to get a grasp of it, but just sit in a M series car and you will understand...I guess the M interior cluster is not up your alley either! But again I know its your own opinion....just like how I feel with the Stett charge piping

Lol. Just love to throw darts huh? I tried to help you and your friend. Oh well.

[HighVoltage]

Originally Posted by cn555ic

Alot of detail goes behind this mod and DIY is almost impossible if you don't have the skillz, taking out the cluster is not the problem!!! Its the eternals and circuit board thats the issue...I mean you can fry your whole circuit board for the cluster and there goes 1000 bucks down the drain, if more because it would require you to bring it to the dealer and reprogram it, if you don't know what your doing.....

Its not that bad really. The package footprints for leds are not that big of an issue to remove and install. You arent likely going to fry anything but if you arent comfortable using a soldering iron than you should not touch it. If you are then you just need to be careful with removing and installing the needles. The cost for this is all in the labor. The parts are dirt cheap.

[cn555ic]

Originally Posted by Former_Boosted_IS

Lol. Just love to throw darts huh? I tried to help you and your friend. Oh well.

Im only messing with you dude....but I will tell my friend about what your stated....but I wish they could have used the OEM coupling to the manifold and I would have been 100% sold....I am in the market for a FMIC and I love alot of them but will not pull the trigger because I want them to use the OEM couplings and fittings instead of those dreaded clamps...But seriously I was joking with you!! Your taking it the wrong way!

[LuvMyRide]

Help me out how?? What do I need help with?? lol

Originally Posted by Former_Boosted_IS

Lol. Just love to throw darts huh? I tried to help you and your friend. Oh well.

[cn555ic]

Originally Posted by LuvMyRide

Help me out how?? What do I need help with?? lol

Not you, I am speaking of someone else with a Stett charge pipe!

[Former_Boosted_IS]

cn, understanding internet tone is difficult. lol.

If anyone wants to do this themselves, just look up surface mount or chip LEDs. They traditionally cost about 50 cents to a dollar a piece. Anyone with a set of tweezers and soldering iron can do this for probably about $10. cn555ic, you can do the rest of the car for probably $30 in parts if you wanted to venture into it.

[Former_Boosted_IS]

cn, understanding internet tone is difficult. lol.

High Voltage is exactly right too. If anyone wants to do this themselves, just look up surface mount or chip LEDs. They traditionally cost about 50 cents to a dollar a piece. Anyone with a set of tweezers and soldering iron can do this for probably about $10. cn555ic, you can do the rest of the car for probably $30 in parts if you wanted to venture into it.

[cn555ic]

Originally Posted by Former_Boosted_IS

cn, understanding internet tone is difficult. lol.

High Voltage is exactly right too. If anyone wants to do this themselves, just look up surface mount or chip LEDs. They traditionally cost about 50 cents to a dollar a piece. Anyone with a set of tweezers and soldering iron can do this for probably about $10. cn555ic, you can do the rest of the car for probably $30 in parts if you wanted to venture into it.

I would believe that almost anything can be changed on the car, but somethings are left to people that have some knowledge in soldering and the precise soldering of small items that are size of a grape pit...I have done every mod thus far on my car myself, but looking at the cluster from the circuit board as I did when it was opened up, I would never even attempt to try this mod myself under any circumstances whether it saves me money or not! One wrong move or mistake and there goes about 1000 bucks down the drain. The cluster although it looks pretty in the dash, its a pretty delicate piece and cannot be roughed around..You seem to be very hands on with everything that you do with your car, out of all the people on this forum, I bet you would be capable of doing this mod by yourself, while I would say 95% or even more would not even want to take on the challenge...Remember its not the cost of the material when it comes to this mod, its the time and labor thats the cost...

[cn555ic]

Boosted..I am stopping at this point and feel in no way that I need to add any more and at this point thats all I will be doing in the interior...I kind of love the rest of the interior being amber orange...Its actually soothing and with the cluster being white Led, it provides a wonderful contrast between cockpit and the rest of the surrounding interior!

[Alex@AKMotorwerk]

Steven, u don't have to sit here and defend urself bro. If you like it that's all that matters. I agree that it looks a bit out of place with the complete white gauge and amber everywhere else.... but if u like it then ur golden

[Former_Boosted_IS]

Originally Posted by cn555ic

I would believe that almost anything can be changed on the car, but somethings are left to people that have some knowledge in soldering and the precise soldering of small items that are size of a grape pit...I have done every mod thus far on my car myself, but looking at the cluster from the circuit board as I did when it was opened up, I would never even attempt to try this mod myself under any circumstances whether it saves me money or not! One wrong move or mistake and there goes about 1000 bucks down the drain. The cluster although it looks pretty in the dash, its a pretty delicate piece and cannot be roughed around..You seem to be very hands on with everything that you do with your car, out of all the people on this forum, I bet you would be capable of doing this mod by yourself, while I would say 95% or even more would not even want to take on the challenge...Remember its not the cost of the material when it comes to this mod, its the time and labor thats the cost...

You probably are right, but the DIY crowd is bigger than it has ever been.

[cn555ic]

Originally Posted by nj323ci

Steven, u don't have to sit here and defend urself bro. If you like it that's all that matters. I agree that it looks a bit out of place with the complete white gauge and amber everywhere else.... but if u like it then ur golden

How does this look out of place especially since the Navi screen has similar colors as well? I think this pic looks hot and if anything it compliments the interior...

[LuvMyRide]

Originally Posted by cn555ic

How does this look out of place especially since the Navi screen has similar colors as well? I think this pic looks hot and if anything it compliments the interior...

[Alex@AKMotorwerk]

Originally Posted by cn555ic

How does this look out of place especially since the Navi screen has similar colors as well? I think this pic looks hot and if anything it compliments the interior...

Originally Posted by LuvMyRide

idk... just seems out of place every time i look at it. As long as u think it looks good, then more power to ya

[dirtyylicous]

Sorry for asking this again but is it possible to change all the other amber to white?
Like hvac, radio, and window buttons? Thanks

[MuchMoore]

I have some OEM M3 needles available if you want to complete this mod properly...PM me or click below my sig for more information.