[karliejai]

i guess for me it will be a last second since i am not sure if my car will be done this friday or not =P and also i have work on saturday at 3pm!

[Vikingus]

little bumpage here...

guys DO NOT forget to take cameras I tend to forget about those type of things :P.. it would be cool to have some before and after shots of our cars after they're done

[HyperM3]

Ill bring a camera. Pretty sure there will be lots of cameras there.

[Alex@AKMotorwerk]

I'll have my DSLR with me, hopefully we can get some good shots!

[trick50]

Question?
Has anyone every done vinyl wrap over the window trim? If so my question is let's say that for whatever reason I get the black vinyl done on my window trim and for whatever reason decide I do not like it and want to remove it...How much of a pain in the ass is it to remove also will I have to clean off alot of glue or adhesive residue?

Just wondering how easily reversible it is if I decide I don't like the look

[Bimmer335i07]

Originally Posted by trick50

Question?
Has anyone every done vinyl wrap over the window trim? If so my question is let's say that for whatever reason I get the black vinyl done on my window trim and for whatever reason decide I do not like it and want to remove it...How much of a pain in the ass is it to remove also will I have to clean off alot of glue or adhesive residue?

Just wondering how easily reversible it is if I decide I don't like the look

+1

Never thought about that before. You brought up a good question.

[Alex@AKMotorwerk]

Originally Posted by trick50

Question?
Has anyone every done vinyl wrap over the window trim? If so my question is let's say that for whatever reason I get the black vinyl done on my window trim and for whatever reason decide I do not like it and want to remove it...How much of a pain in the ass is it to remove also will I have to clean off alot of glue or adhesive residue?

Just wondering how easily reversible it is if I decide I don't like the look

I don't know of anyone who has done it around here, but i know a few guys have had it done by "brandonanix" out west and he says it's fairly simple to remove. I'm thinking there might be some residue to clean off, but if you don't like it you'll most likely remove it within a week or so. I don't think it will leave as much glue as if you left it on for say 6months or a year. I'm guessing if you heat up the vinyl and use some goo gone it shouldn't be a problem.

I'm thinking about doing the same thing as you if i don't like it once it's done.

[Bimmer335i07]

Originally Posted by nj323ci

I don't know of anyone who has done it around here, but i know a few guys have had it done by "brandonanix" out west and he says it's fairly simple to remove. I'm thinking there might be some residue to clean off, but if you don't like it you'll most likely remove it within a week or so. I don't think it will leave as much glue as if you left it on for say 6months or a year. I'm guessing if you heat up the vinyl and use some goo gone it shouldn't be a problem.

I'm thinking about doing the same thing as you if i don't like it once it's done.

Hey, looks like I won't be meeting up with you in Edison. Maybe we can meet at one of the rest stops on the GSP. I think there is a huge rest stop right after the toll if you're headed South from Exit 131. What do you think?

[HyperM3]

Best bet if youre worried about the look is to NOT go first. Let a few cars go through(especially one in the same color as yours) and then make your decision.

Ive removed vinyl stickers from my car before(windows and hood) and there was never really any residue leftover. If there is, its not hard to get off at all with some goo gone and a rag. Since its over the metal trim, you dont have to worry about your paint or anything.

[Alex@AKMotorwerk]

Originally Posted by Bimmer335i07

Hey, looks like I won't be meeting up with you in Edison. Maybe we can meet at one of the rest stops on the GSP. I think there is a huge rest stop right after the toll if you're headed South from Exit 131. What do you think?

haha- just saw this post after i posted in your other thread. What time do you guys think you'll be at that rest area? I can meet you there no problem. There is the Cheesquake rest area right after the bridge/toll where the parkway splits into express/local

[Bimmer335i07]

Originally Posted by HyperM3

Best bet if youre worried about the look is to NOT go first. Let a few cars go through(especially one in the same color as yours) and then make your decision.

Ive removed vinyl stickers from my car before(windows and hood) and there was never really any residue leftover. If there is, its not hard to get off at all with some goo gone and a rag. Since its over the metal trim, you dont have to worry about your paint or anything.

But nobody else has Barbera Red???

[Bimmer335i07]

Originally Posted by nj323ci

haha- just saw this post after i posted in your other thread. What time do you guys think you'll be at that rest area? I can meet you there no problem. There is the Cheesquake rest area right after the bridge/toll where the parkway splits into express/local

Are you sure it's called the Cheesequake? Can you get me some sort of address? This way, I can google.map it to see how far it is from the DD.

[Alex@AKMotorwerk]

Originally Posted by Bimmer335i07

Are you sure it's called the Cheesequake? Can you get me some sort of address? This way, I can google.map it to see how far it is from the DD.

yeah, this is what i found on it... Cheesequake (Garden State Parkway Mile Post 123)

[TurboBullett@Ambient Thermal Management]

Originally Posted by trick50

Question?
Has anyone every done vinyl wrap over the window trim? If so my question is let's say that for whatever reason I get the black vinyl done on my window trim and for whatever reason decide I do not like it and want to remove it...How much of a pain in the ass is it to remove also will I have to clean off alot of glue or adhesive residue?

Just wondering how easily reversible it is if I decide I don't like the look

vinyl especially 3m vinyl is very easy to remove with a little heat(blow dryer), patience and a little goo gone.

[fizzle]

im finally going to meet the infamous Hyper.....

[Bimmer335i07]

Originally Posted by fizzle

im finally going to meet the infamous Hyper.....

Wow, you've never met your better half before? Damn... and I always thought that you guys were an old married couple. lol!

[fizzle]

seriously right??? ah this is going to be fun.

[Bimmer335i07]

Originally Posted by fizzle

seriously right??? ah this is going to be fun.

Jamie, are you going to meet us there?

[fizzle]

yea im just going to meet you at Vigg parking lot. hopefully the can fit us all.

[NikB316]

Hey,
I will be there Saturday at 12 for the vinyl installation, however I have a meeting with a client in Newark at 3pm. Would it be cool to have my car done as one of the first few? I would need to leave by 2:15 at the latest to race up there, so as long as it's done by then I would good to go. I don't mean to be cutting in front of anyone but would really appreciate it if ya guys could help me out...If you guys are still hanging around when my meetings over I will def stop by again to check out the meet and how the rest of the installations went. Thanks!

[Alex@AKMotorwerk]

Originally Posted by NikB316

Hey,
I will be there Saturday at 12 for the vinyl installation, however I have a meeting with a client in Newark at 3pm. Would it be cool to have my car done as one of the first few? I would need to leave by 2:15 at the latest to race up there, so as long as it's done by then I would good to go. I don't mean to be cutting in front of anyone but would really appreciate it if ya guys could help me out...If you guys are still hanging around when my meetings over I will def stop by again to check out the meet and how the rest of the installations went. Thanks!

If it's ok with everyone else, you can go first if you need to. I don't mind, but i guess we can figure it out once we get there. Try and show up early... it's going to be more of a first come first serve type of deal.

See u there!

[Alex@AKMotorwerk]

Originally Posted by TTurboBullett

vinyl especially 3m vinyl is very easy to remove with a little heat(blow dryer), patience and a little goo gone.

Hey Mark, are u going to show up on Sat?