Eric's HPF Single Turbo N54 Is ALIVE - VIDEO

AYF80 · 04-08-2012, 08:47 AM

Yeah the HPFP and the injectors were replaced by BMW on thursday. The HPFP actually went out while on the Dyno on wednesday. I know its common especially since it was the original pump, but i was just thinking to myself how lucky i was that i ended up with a good one.

All the injectors were replaced under the BMW recall, the report stated that 5 of 6 injectors were in a un expectable tolerance or something like that.

LuSt4Boost · 04-08-2012, 10:12 AM

Glad everything is going great... Cant wait for your review.

gian335 · 04-08-2012, 11:38 AM

Quote:

Originally Posted by HPF 335i #1

Yeah the HPFP and the injectors were replaced by BMW on thursday. The HPFP actually went out while on the Dyno on wednesday. I know its common especially since it was the original pump, but i was just thinking to myself how lucky i was that i ended up with a good one.

All the injectors were replaced under the BMW recall, the report stated that 5 of 6 injectors were in a un expectable tolerance or something like that.

good to hear your up and running

hows the transmission running with the turbo ? any trouble at shift point?

AYF80 · 04-08-2012, 12:46 PM

Quote:

Originally Posted by gian335

good to hear your up and running

hows the transmission running with the turbo ? any trouble at shift point?

no clue, I have not herd anything about the trans at all yet. All I know is that if there are issues with shifting or slipping, its going to get built.

HPF Chris · 04-10-2012, 06:22 PM

Quote:

Originally Posted by Irishace

That dyno session must have been a game changer..........

It made 474rwhp and we maxed out the MAP sensor at 20psi. We will be installing a different map sensor shortly.

Joshboody · 04-10-2012, 06:41 PM

Cool, I'm assuming 91oct... let's see some logs! very interested in the timing curve. actually street logs would be even better.

M///1rider · 04-13-2012, 12:27 PM

cant wait for this to get up and running so there can be competitive pricing battles going on between Procede/FFTEC and HPF...... wonder which ones going to be more expensive any guess?

what about price range?

no more than 5k for hardware (turbo, exhaust manifold, and in HPF's case an Intake manifold)

Themythx · 04-13-2012, 01:26 PM

Quote:

Originally Posted by M///1rider

cant wait for this to get up and running so there can be competitive pricing battles going on between Procede/FFTEC and HPF...... wonder which ones going to be more expensive any guess?

what about price range?

no more than 5k for hardware (turbo, exhaust manifold, and in HPF's case an Intake manifold)

Hopefully its not to far fetched trying to get my car ready for this and that alone isn't cheap lol

AYF80 · 04-13-2012, 06:41 PM

Waiting for final pump gas 20 PSI tuning Dyno...

dlbrooks18 · 04-13-2012, 06:46 PM

Quote:

Originally Posted by HPF 335i #1

Yeah the HPFP and the injectors were replaced by BMW on thursday. The HPFP actually went out while on the Dyno on wednesday. I know its common especially since it was the original pump, but i was just thinking to myself how lucky i was that i ended up with a good one.

All the injectors were replaced under the BMW recall, the report stated that 5 of 6 injectors were in a un expectable tolerance or something like that.

Under warranty?? They had no issues with single turbo

Can't wait for a review of your car1

AYF80 · 04-13-2012, 07:02 PM

Quote:

Originally Posted by dlbrooks18

Under warranty?? They had no issues with single turbo

Can't wait for a review of your car1

It was replaced under the recall with the injectors. I guess HPF brings cars there all the time, so i don't think the Single was a big deal. lol.

jayzF30 · 04-13-2012, 07:12 PM

Wow 474 hp! did you do any more dynos?

dlbrooks18 · 04-13-2012, 07:12 PM

Quote:

Originally Posted by HPF 335i #1

It was replaced under the recall with the injectors. I guess HPF brings cars there all the time, so i don't think the Single was a big deal. lol.

Cool.. I'm excited for you, when will you be getting your car back?

AYF80 · 04-13-2012, 07:19 PM

Chris, any final tuning updates or Dyno's?

AYF80 · 04-13-2012, 07:22 PM

Quote:

Originally Posted by dlbrooks18

Cool.. I'm excited for you, when will you be getting your car back?

Im planning on 2 weeks for arival. HPF just needs to finalize and lock in the tune and install a few parts I have sitting around.

Then she will ship out. I assume it will take at least 5-8 days to get here.

GetWellSoon · 04-13-2012, 08:31 PM

Bro I would of shot myself, to have them use the car for all this time and to get 470 whp, you could've got the same with Rb's for $3000

M3_WC · 04-13-2012, 09:27 PM

Quote:

Originally Posted by GetWellSoon

Bro I would of shot myself, to have them use the car for all this time and to get 470 whp, you could've got the same with Rb's for $3000

Bro...that is on 20psi, they are putting in a new sensor and raising the boost. A few pages back they are shooting for mid to low 500whp, on 92 octane(no meth).

F80M · 04-13-2012, 10:48 PM

Quote:

Originally Posted by HPF 335i #1

Im planning on 2 weeks for arival. HPF just needs to finalize and lock in the tune and install a few parts I have sitting around.

Then she will ship out. I assume it will take at least 5-8 days to get here.

Cool! I thought you were going to get the car back in 2015. The wait to drive your own car is finally over....
Congrats man.

Irishace · 04-14-2012, 06:24 AM

Quote:

Originally Posted by GetWellSoon

Bro I would of shot myself, to have them use the car for all this time and to get 470 whp, you could've got the same with Rb's for $3000

+1, pretty sad really.

pits200 · 04-14-2012, 06:48 AM

Ya, I don't understand. Its hard to compare this single to shivs because hasn't his always used meth where this is pump only?

I mean 470 definitely doesn't seem impressive. I'm surprised they'd give the car back to you without testing it at higher horsepower/psi numbers.

And with that dyno curve, I couldn't see this car running any better than mid 11s

E90SoFlo · 04-14-2012, 09:22 AM

I would wait until the car is finished before making assumptions.

dlbrooks18 · 04-14-2012, 10:34 AM

Quote:

Originally Posted by E90SoFlo

I would wait until the car is finished before making assumptions.

+1

04-08-2012, 08:47 AM	#1079
AYF80 Major 83 Rep 1,142 Posts Drives: 2015 AY F80 Join Date: Sep 2009 Location: Nashville, TN iTrader: (0)	Yeah the HPFP and the injectors were replaced by BMW on thursday. The HPFP actually went out while on the Dyno on wednesday. I know its common especially since it was the original pump, but i was just thinking to myself how lucky i was that i ended up with a good one. All the injectors were replaced under the BMW recall, the report stated that 5 of 6 injectors were in a un expectable tolerance or something like that.
	Appreciate 0 Quote

04-08-2012, 10:12 AM	#1080
LuSt4Boost Second Lieutenant 11 Rep 297 Posts Drives: CTS-V Join Date: Dec 2008 Location: MD iTrader: (2)	Glad everything is going great... Cant wait for your review. __________________ Boost \|Get a Grip
	Appreciate 0 Quote

04-10-2012, 06:41 PM	#1084
Joshboody Lieutenant Colonel 67 Rep 1,708 Posts Drives: pickemuptruck Join Date: Jul 2009 Location: Phoenix, AZ iTrader: (7)	Cool, I'm assuming 91oct... let's see some logs! very interested in the timing curve. actually street logs would be even better.
	Appreciate 0 Quote

04-13-2012, 12:27 PM	#1085
M///1rider Banned 49 Rep 582 Posts Drives: 2011 BMW 1M Join Date: Apr 2011 Location: NJ iTrader: (0)	cant wait for this to get up and running so there can be competitive pricing battles going on between Procede/FFTEC and HPF...... wonder which ones going to be more expensive any guess? what about price range? no more than 5k for hardware (turbo, exhaust manifold, and in HPF's case an Intake manifold)
	Appreciate 0 Quote

04-13-2012, 06:41 PM	#1087
AYF80 Major 83 Rep 1,142 Posts Drives: 2015 AY F80 Join Date: Sep 2009 Location: Nashville, TN iTrader: (0)	Waiting for final pump gas 20 PSI tuning Dyno...
	Appreciate 0 Quote

04-13-2012, 07:12 PM	#1090
jayzF30 Captain 36 Rep 783 Posts Drives: '07 335i, '09 M3 Join Date: Mar 2012 Location: Thornhill iTrader: (0)	Wow 474 hp! did you do any more dynos?
	Appreciate 0 Quote

04-13-2012, 07:19 PM	#1092
AYF80 Major 83 Rep 1,142 Posts Drives: 2015 AY F80 Join Date: Sep 2009 Location: Nashville, TN iTrader: (0)	Chris, any final tuning updates or Dyno's?
	Appreciate 0 Quote

04-13-2012, 08:31 PM	#1094
GetWellSoon Banned 16 Rep 242 Posts Drives: 2009 335i e92 Join Date: Oct 2011 Location: Brooklyn & NJ iTrader: (0)	Bro I would of shot myself, to have them use the car for all this time and to get 470 whp, you could've got the same with Rb's for $3000
	Appreciate 0 Quote

04-14-2012, 06:48 AM	#1098
pits200 Colonel 556 Rep 2,598 Posts Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh iTrader: (1)	Ya, I don't understand. Its hard to compare this single to shivs because hasn't his always used meth where this is pump only? I mean 470 definitely doesn't seem impressive. I'm surprised they'd give the car back to you without testing it at higher horsepower/psi numbers. And with that dyno curve, I couldn't see this car running any better than mid 11s
	Appreciate 0 Quote

04-14-2012, 09:22 AM	#1099
E90SoFlo Banned 223 Rep 2,669 Posts Drives: E90 335i Join Date: Jun 2011 Location: Naples, FL iTrader: (9)	I would wait until the car is finished before making assumptions.
	Appreciate 0 Quote