[Expert@ApexWheels]

E90 335i Photoshoot: Ml-10RT wheels in multiple colors

The non-M E9X wait is OVER! As these 3-series has been one of our most popular chassis requests for the ML-10’s yet, we are happy to show off the ML-10RT’s on this proper E90. We included showing off these staggered specs showing what an enthusiast’s car with modifications could handle. As for the squared set, we do know this is one of, if not the most common setup across e9x chassis. We’re excited to feature 18” and 19” staggered fitments on this clean M3 in our Motorsport Gold and Anthracite finish. We have more shoots lined up in the future so let us know what car you’d like to see next!

18” Staggered:

ML-10RT in Machined Lip Gloss Motorsport Gold
Front: 18x9.5 ET22 - Profile 3
Rear: 18x10.5 ET22 - Profile 4


Tires:
Continental ExtremeContact Sport02
Front: 265/35-18
Rear: 295/35-18

A lot of you were excited to see some deeper profile fitments. This setup shows off our 18x9.5" ET22 up front which is a profile 3 and the ultra deep profile 4 18x10.5" ET22 out back. Finished in Motorsport Gold with a machined lip to compliment the red exterior.


Note, this car has heavily modified suspension and fenders to fit this setup which is normally intended for an E9X M3. If your E90 non-M is closer to stock, we've got bolt-on & OEM+ fitments available in the ML-10RT design. Check out our fitment guide to dial in your perfect fitment!

18” Squared:

ML-10RT in Machined Lip Anthracite
Front: 18x9 ET30 with a 12mm front spacer - Profile 3
Rear: 18x9 ET30 with 15mm rear spacers - Profile 3


Tires:
Nitto NT01
Front: 245/40-18
Rear: 245/40-18

This car is set with our most common 18x9 ET30 squared, although this car is running spacers due to it’s highly modified suspension with rolled and pulled fenders, you can see this is a beautiful fit with a 245/40-18. This fitment is great for running some of the most wheel and tire you can get with a squared setup without any problems as long as the suspension clears, otherwise you might need a 5mm front spacer to help!

This 18” square fitment is what we recommend and is most common for E9x non-M chassis.

Big thanks to our Photoshoot Volunteer for letting us shoot their car! You can follow him on IG here: @sonydvo

If you have a clean car in the Bay Area that you’d like to see featured on Apex wheels, Feel free to submit a response to our form here.

If you like the look of these wheels, but want to see more on car photography, head over to our ML-10RT Gallery.

Want to learn more about the development of these wheels? Check out our Project Page

Pre-Order ML-10RT // Real Performance // Instagram

[RealJ22]

Moved them from the blue car to black. Will take better photos when I’m back.


best image hosting

[Expert@ApexWheels]

Originally Posted by RealJ22

Moved them from the blue car to black. Will take better photos when I’m back.


best image hosting

Can't wait to see those!

-Jasper