BMW CODING success

viperssd · 01-23-2011, 10:15 PM

I saw very different modules in the second part when I loaded up anything other than CAS. Depending on the year of your car, you may have different names depending on what year it is.

spera23 · 01-23-2011, 10:34 PM

Quote:

Originally Posted by viperssd

I saw very different modules in the second part when I loaded up anything other than CAS. Depending on the year of your car, you may have different names depending on what year it is.

It is a 2007. So should I stay away from loading up anything other then CAS? Then stick to the modules in there?

Pseudo Nim · 01-23-2011, 10:48 PM

Quote:

Originally Posted by DimSum

NFRM*

Quote:

Originally Posted by matrix76

what? NFRM contains a setting to make AEs = DRLs on pre-LCIs?

spera23 · 01-23-2011, 10:54 PM

Quote:

Originally Posted by AoshichanX

For my e90 335i 02/2007 build it was:

FRM SIDEMARKER_US

Was that for the orange corner lights or the little corner orange LED's?

I used SIDEMARKER_US in the FRM for the orange corner lights, but I am looking for the code to get rid of the daytime running orange corner LED's

matrix76 · 01-23-2011, 11:30 PM

Quote:

Originally Posted by Pseudo Nim

what? NFRM contains a setting to make AEs = DRLs on pre-LCIs?

I am looking for the setting for 2009 + to make AEs = DRLs

At this time we do not know , ,

CRIX23 · 01-24-2011, 01:27 PM

Has anyone been able to code the sirius module to the car after the retro fit.

Thanks

byoung8 · 01-24-2011, 04:52 PM

Quote:

Originally Posted by *********

Does anyone know if we can code the speed limiter? Or the NIC (Neutral Idle Control) to resolve the sticky brakes issue?

EDIT: speed limiter...I know. But what about the NIC?

The recall software upgrade seems to have fixed my sticky brakes. I used to get it at least once a morning or once in the evening when the car was still cold. Now I'm waiting for it to happen, and nothing so far.

Wissam · 01-24-2011, 08:07 PM

Quote:

Originally Posted by xxxjecxxx

Verified that all the files you need already come with the supplied software. You just have to make sure to have without the quotes ";C:\NCSEXPERT\BIN" in your system "path" it's in the DIY

keep in mind if you renamed the NCSEXPERT folder it will look a little different.

Thanks xxxjecxxx, I'm assuming you meant “;C:\ediabas\bin” as per the DIY, which I had done already...my status is I installed the USB port drivers successfully, INPA loads fine, but NCSEXPERT does not launch. I'm becoming more and more convinced that NCSEXPERT does not work on Windows 7 x64, period. If anybody was personally able to make it work, please share...the workaround would be things like VMWare or Microsoft's Virtual PC, but in my case I do have access to an older laptop running XP and everything seems fine so far in terms of software setup, I'm just waiting for the cable to arrive to test connectivity with the car and coding...

Pseudo Nim · 01-24-2011, 09:04 PM

Quote:

Originally Posted by *********

Does anyone know if we can code the speed limiter? Or the NIC (Neutral Idle Control) to resolve the sticky brakes issue?

EDIT: speed limiter...I know. But what about the NIC?

hey ... help on the speed limiter? or did you just add ZSP to the VO?

mase · 01-25-2011, 12:53 PM

Possibly very obvious answer, but is there a way to do this programming through the BT tool?

1QuikWS6 · 01-25-2011, 01:00 PM

Question been answered before - BT 'claims' you can use the Professional Tool to code - but even they admit that they have not got it to work yet.

So basically, at this point - No

mase · 01-25-2011, 01:11 PM

oops, my bad. may be worthwhile to talk to their cust support then to avoid the $120 cost.. I mean, this cable is shipping straight from China.. if it wasn't for BMW's, it wouldn't be selling for more than 5 bucks.

CubanJJ09 · 01-25-2011, 01:11 PM

Quote:

Originally Posted by mase

Possibly very obvious answer, but is there a way to do this programming through the BT tool?

my research says no but just buy the enthusiast cable then buy the separate 100 dollar cable. youll save 300 over buyin the pro version IF it even does code

mase · 01-25-2011, 01:23 PM

oh I already have the enthusiast cable, just never thought to try to code this type of thing. I might ask the cust service if there is a way. I'll report back if I figure it out.

CubanJJ09 · 01-25-2011, 01:29 PM

Quote:

Originally Posted by mase

oh I already have the enthusiast cable, just never thought to try to code this type of thing. I might ask the cust service if there is a way. I'll report back if I figure it out.

ill be waiting

ModBargainsTech · 01-25-2011, 01:39 PM

BT Scan Tool PRO can do very minor coding on specific chassis - mostly the newer models.

BT Scan Tool was mainly designed for diagnostics purposes so don't expect too much of it for coding purposes.

-Frank

Toshi · 01-25-2011, 06:34 PM

+1
Anyone can clarify which value should be modified in FRM/NFRM?
I am going to retrofit my friend's E92, which has FRM2, with the LCI taillights.

Quote:

Originally Posted by ironman1982

Ok, I've searched the thread for "Taillamp" and "LED" but didn't see any posts related to coding out the bulb check for pre-LCI cars retrofitting the LED taillamp assemblies to them. I've seen where some with FRM2 modules might need the FRM3 modules to code out the bulb check. I was subscribed to the thread but the flood of emails in my box got out of hand and after about 30+ pages of reading this thread had become a bit cumbersome to navigate. lol Has anyone had success with this yet? Also, has anyone tried automatic switch over to night mode for the navigation on the CIC module on a 2009 model?

I've been waiting on my cable about 3 weeks now so all I can do is read and wait!

matrix76 · 01-25-2011, 09:07 PM

This is a reminder to everyone to update the successful coding you have done and not yet updated on the spreadsheet. This sheet was built by Neutrino45 and is referenced from his original post #584.

Please have a look and update where you can, this spread sheet supports everyone on this forum,

https://spreadsheets0.google.com/ccc...CPqY7sEC#gid=0

q96 · 01-26-2011, 12:40 AM

Hi everyone, this post is amazing but very long....
Does anybody know if it's possible to change some options of the connected drive ?
1/ remove the speed limit on connected drive (that doesn't allow to go to bmw online while you are driving)
2/ Is it possible to change some more deeper values like language and country in the specific connected drive ?

Thanks for your return

cbetlyon · 01-26-2011, 10:46 AM

does any one know how disable the cold and hot check of the parking lights on a halogen car? would this get rid of bulb out errors i'm having with them?

Mexcar007 · 01-26-2011, 01:17 PM

Quote:

Originally Posted by cbetlyon

does any one know how disable the cold and hot check of the parking lights on a halogen car? would this get rid of bulb out errors i'm having with them?

Have you checked the sheet it has several codes for that

cbetlyon · 01-26-2011, 02:09 PM

Quote:

Originally Posted by Mexcar007

Have you checked the sheet it has several codes for that

it has it for all the lights excepted the parking lights. am i missing something

01-23-2011, 10:15 PM	#1145
viperssd Private First Class 19 Rep 193 Posts Drives: 2023 X7 Join Date: Jul 2005 Location: California, USA iTrader: (2)	I saw very different modules in the second part when I loaded up anything other than CAS. Depending on the year of your car, you may have different names depending on what year it is. __________________ 2011 335i xDrive E92 Montego Blue (Ret.) 2004 Z4 3.0i E85 Black Black Sapphire (Ret.)
	Appreciate 0 Quote

01-24-2011, 01:27 PM	#1150
CRIX23 New Member 1 Rep 18 Posts Drives: Space Grey 335i black interior Join Date: May 2010 Location: Miami iTrader: (0)	coding sirius Has anyone been able to code the sirius module to the car after the retro fit. Thanks Last edited by CRIX23; 01-24-2011 at 01:47 PM..
	Appreciate 0 Quote

01-25-2011, 12:53 PM	#1154
mase Banned 59 Rep 446 Posts Drives: 335i Join Date: Nov 2009 Location: NYC iTrader: (27)	Possibly very obvious answer, but is there a way to do this programming through the BT tool?
	Appreciate 0 Quote

01-25-2011, 01:00 PM	#1155
1QuikWS6 No 55mph 1627 Rep 8,495 Posts Drives: F32 435ix MSport Join Date: Jul 2009 Location: Blitzburgh, PA iTrader: (113) Garage List 2022 BMW M440ix Vert [0.00] 2015 BMW 435ix MSport [0.00] 2000 Pontiac Trans Am [0.00]	Question been answered before - BT 'claims' you can use the Professional Tool to code - but even they admit that they have not got it to work yet. So basically, at this point - No __________________ F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
	Appreciate 0 Quote

01-25-2011, 01:11 PM	#1156
mase Banned 59 Rep 446 Posts Drives: 335i Join Date: Nov 2009 Location: NYC iTrader: (27)	oops, my bad. may be worthwhile to talk to their cust support then to avoid the $120 cost.. I mean, this cable is shipping straight from China.. if it wasn't for BMW's, it wouldn't be selling for more than 5 bucks.
	Appreciate 0 Quote

01-25-2011, 01:23 PM	#1158
mase Banned 59 Rep 446 Posts Drives: 335i Join Date: Nov 2009 Location: NYC iTrader: (27)	oh I already have the enthusiast cable, just never thought to try to code this type of thing. I might ask the cust service if there is a way. I'll report back if I figure it out.
	Appreciate 0 Quote

01-25-2011, 01:39 PM	#1160
ModBargainsTech Private 0 Rep 79 Posts Drives: E92 335i/E90 335i/ E82 135i/ Join Date: Jan 2011 Location: La Habra, Ca iTrader: (0)	BT Scan Tool PRO can do very minor coding on specific chassis - mostly the newer models. BT Scan Tool was mainly designed for diagnostics purposes so don't expect too much of it for coding purposes. -Frank
	Appreciate 0 Quote

01-25-2011, 09:07 PM	#1162
matrix76 Major 63 Rep 1,300 Posts Drives: 2020 Z4 M40i Black/Red Join Date: Sep 2009 Location: Port Dover, Ontario iTrader: (1)	This is a reminder to everyone to update the successful coding you have done and not yet updated on the spreadsheet. This sheet was built by Neutrino45 and is referenced from his original post #584. Please have a look and update where you can, this spread sheet supports everyone on this forum, https://spreadsheets0.google.com/ccc...CPqY7sEC#gid=0 __________________ Brian Black Sapphire, Black w/Burrwood Trim & Shifter, 162's, Mtec H8 AE's, DS1 HID 6000K Last edited by matrix76; 01-26-2011 at 11:09 AM..
	Appreciate 0 Quote

01-26-2011, 12:40 AM	#1163
q96 Private 20 Rep 69 Posts Drives: F31 320d Pack M Join Date: Dec 2005 Location: France iTrader: (0)	Hi everyone, this post is amazing but very long.... Does anybody know if it's possible to change some options of the connected drive ? 1/ remove the speed limit on connected drive (that doesn't allow to go to bmw online while you are driving) 2/ Is it possible to change some more deeper values like language and country in the specific connected drive ? Thanks for your return
	Appreciate 0 Quote

01-26-2011, 10:46 AM	#1164
cbetlyon Second Lieutenant 10 Rep 272 Posts Drives: 07 328xi Jet Black/Black Join Date: Oct 2008 Location: Winston-Salem, NC iTrader: (1)	does any one know how disable the cold and hot check of the parking lights on a halogen car? would this get rid of bulb out errors i'm having with them?
	Appreciate 0 Quote