[DESI4life10]

Originally Posted by AW128i

This is exactly what I want to do and I am eagerly awaiting your execution to see if it takes!!

So Dimsum and I finally did the install yesterday.

Went from halogen headlights to OEM xenon headlights using OEM bulbs/ballast (no external harness) and then coded the car to let it know that xenon headlights are installed.

After the coding, started that car and voila, no errors

The car now knows its runninng xenon lights and therefore get no errors.

It isn't 100% complete as I have lost my high beam functionality (don't have the bixenon wire). There is a code line to turn the halogen high beam to turn it on according to the spreadsheet, but that line isn't present on the e90 models.

So I am still researching which line will get me the high beams on my halogen.

But so far, all is positive and I am so glad I no longer need to make some kind of harness to fool the computer.

[antiks]

FYI, if you have a JB4 in, you have to set it to map 0 to bypass all the CAN stuff, or it will make the coding process not work right..and I'm happily coding away now!

[mineo77]

getting error when reading:

group file: D_SIM.
SYS-0012: IDENTIFICATION ERROR
Program will be stopped

any ideas?

[Wissam]

Thanks AoshichanX...anybody was able to code the E90 main CAS module successfully this way? just curious how long it takes for an E90...

[spera23]

Originally Posted by AoshichanX

Yup, got an error at TCUM. But I made a video anyway. It codes the car in the order as seen on the screen:

KOMBI, TCUM, AMPT, IHK, FRM, DSC, LSMC, RSMC, EKP, JBBF, 62BMO, CTUNE, CAUDI, CAPPL....etc

I still estimate full coding to be 2-3 minutes.

From cold start, I reckon you have 15 minutes to mess with your car without having to even raise an eyebrow at over battery drainage.

Video up in a bit.

Since you get the error on the TCUM, does that stop the coding? I know your KOMBI gets coded, but will it continue past the TCUM and code the AMPT, IHK etc etc??

[mineo77]

so what is the chassis code for the 135i? there is no E82, 88, 87??

[xxxjecxxx]

Originally Posted by mineo77

so what is the chassis code for the 135i? there is no E82, 88, 87??

e89

[Pseudo Nim]

Anyone know - when retrofitting electric seats with memory on a car that came with manual seats, is it a question of adding something to the VO, or is more work needed (assume all electric wiring done, obv.)?

[rubdom]

I haven't received my cable yet but I have been researching. I ran across this:
http://forums.bimmerforums.com/forum....php?t=1553779

NCS dummy. Anyone tried this to figure out what values can be changed to? It will even do some translation.

[MKR_DmD]

Ya, went to the dealer yesterday and the car got reflashed for the fuel pump and lost all my coding. Good thing I didn't pay for it or I would of been screwed. Got to love DIY.

[bimal296]

DVD in motion Activation on E92 CIC

I believe one has to activate the speedlock menu(ncsexpert),which
shows up on the I-Drive
Only problem is its a secret menu on the I-Drive
Anyone knows how to make the speedlock menu show up
on the I-Drive.

http://www.auto-treff.com/bmw/vb/sho...5&pagenumber=9

I am just curious.I already have a module for Tv in motion

Thx

[NiVeDh]

Originally Posted by bimal296

DVD in motion Activation on E92 CIC

I believe one has to activate the speedlock menu(ncsexpert),which
shows up on the I-Drive
Only problem is its a secret menu on the I-Drive
Anyone knows how to make the speedlock menu show up
on the I-Drive.

http://www.auto-treff.com/bmw/vb/sho...5&pagenumber=9

I am just curious.I already have a module for Tv in motion

Thx

That's correct. I haven't been able to get it to work though.

[xxxjecxxx]

Has anyone else coded a 135i?

trying to help another member

After coding there is a warning error on dash with a picture of a gear. car is manual. any ideas?

[Toshi]

The link didn't work.
Could you upload them again?

Originally Posted by spazticrecords

Updated DATEN files for CIC module for 2009 + cars. I uploaded another archive a while back, but some reported that other modules couldn't be read/write when replaced all files so I just found the CIC files instead of everything. These are just the files for the CIC. Replace with respective directories inside the achieve. There are 2 directories.

C:\NCSEXPERT\DATEN\E89
C:\EDIBIAS\ECU

Once replaced I was able to read and write all previous working modules + CIC. Please let me know if you have any questions and this works.

http://hotfile.com/dl/97282608/d8023...dated.rar.html

Pass: e90post

[mineo77]

Originally Posted by xxxjecxxx

Has anyone else coded a 135i?

trying to help another member

After coding there is a warning error on dash with a picture of a gear. car is manual. any ideas?

Yep, have multiple symbols on my dash. I took care of the tpms with the BT tool but have these 2 still on my dash and a service info (wrong dates etc). This came on after the digital speedo change.

wondering if re-installing my stock file would do the trick?

[spera23]

Originally Posted by AoshichanX

It does stop the coding.

For my e65, you will see one sub-module coded one after the other in quick succession (1-3 seconds), unless it's a particularly length module, it may be 20 seconds. (I can take a video if you wish next weekend for your reference...man I messed with the e65 for more than an hour without a hint of the battery dying...e65 is a true champ)

Also if you recently coded and have not disconnected the cable or closed the software, the initial start-up takes a bit longer, as you may witness there was a significant downtime in the video before the KOMBI sub-module got coded.


If it's a fresh start, the car will communicate with the laptop immediately.

I have my TCUM retrofitted as well on my car and it does throw an error when I try to access it. I guessing that means (for me) this would not be the best idea in terms of locating a code i cannot find within a particular module as the whole car processing will just quit after it hits the TCUM???

Also, I have an e65 as well. Any idea how I can disable the alarm on it? I am having the alarm go off randomly for no reason.

[spazticrecords]

Originally Posted by bimal296

DVD in motion Activation on E92 CIC

I believe one has to activate the speedlock menu(ncsexpert),which
shows up on the I-Drive
Only problem is its a secret menu on the I-Drive
Anyone knows how to make the speedlock menu show up
on the I-Drive.

http://www.auto-treff.com/bmw/vb/sho...5&pagenumber=9

I am just curious.I already have a module for Tv in motion

Thx

Very interesting find. I previoulsy activated those 2 options but nothing appeared on the navigation so I figured it didn't work but didn't realize I need to enter a button combination. Does anyone have any light on this subject.

[NiVeDh]

Originally Posted by spazticrecords

Very interesting find. I previoulsy activated those 2 options but nothing appeared on the navigation so I figured it didn't work but didn't realize I need to enter a button combination. Does anyone have any light on this subject.

You can get into the service menu using this:

Go to Start menu
Push controller in up direction for at least 10s
Controller 3 notches to the right
Controller 3 notches to the left
Controller 1 notch to the right
Controller 1 notch to the left
Controller 1 notch to the right
Press controller once
The Service menu is now added as the last submenu to "Settings"

I think another combination needs to be entered so that you can see the other two menus. Someone offered to sell the information for 2000 Euros on BMWECU. Anyone interested in pitching in?

[badluckm3]

Originally Posted by mineo77

Yep, have multiple symbols on my dash. I took care of the tpms with the BT tool but have these 2 still on my dash and a service info (wrong dates etc). This came on after the digital speedo change.

wondering if re-installing my stock file would do the trick?

Glad a 135i owner chimed in. I've been looking to do this, but would be pretty pissed to have to look at random lights on my dashboard for no good reason.

Any other 135i owners out there do any euro coding not resulting in any new lights/codes?

[srt42b]

Originally Posted by mineo77

Yep, have multiple symbols on my dash. I took care of the tpms with the BT tool but have these 2 still on my dash and a service info (wrong dates etc). This came on after the digital speedo change.

wondering if re-installing my stock file would do the trick?

I assume this is the same as the 335i:

Go to Check Control with the stalk
Press and hold BC button for a few seconds
Scroll through CC-ID's to get the #
Go HERE to find the actual error

I had the second one (among several others) when I updated my DSC module and had to recalibrate it in Progman.

[mineo77]

yea, i think what happened was a threw those codes from a low voltage when coding. after we finished coding i had to jump my car so i am going to have my ECU reset tomorrow and start over with my battery hooked up to constant power.

[mineo77]

Originally Posted by srt42b

I assume this is the same as the 335i:

Go to Check Control with the stalk
Press and hold BC button for a few seconds
Scroll through CC-ID's to get the #
Go HERE to find the actual error

I had the second one (among several others) when I updated my DSC module and had to recalibrate it in Progman.

how did you fix the codes? i scanned wit my BT with no success