[EB89]

Hoods aren't that expensive.
Is that an M3 replica for LCI

http://seiboncarbon.com.au/products/...l#!prettyPhoto

[CashedUpBogan]

Originally Posted by Socket

There is a nice selection of hoods and you could leave it unpainted Cashy

Hood, boot and doors at some point. Maybe even custom roof panels. Never been done on the vert before.

[Fuji]

How much for a CSL trunk??

[Flex68]

Easily becoming one of my all time fav builds

[Socket]

Originally Posted by EB89

Hoods aren't that expensive.
Is that an M3 replica for LCI

http://seiboncarbon.com.au/products/...l#!prettyPhoto

Yep there is quite a selection

[Socket]

Originally Posted by Fuji

How much for a CSL trunk??

See post 1207

[Socket]

Originally Posted by Flex68

Easily becoming one of my all time fav builds

Thanks Flexy

[Socket]

MOD 41 Blackvue Dash Cam & Vico Power Plus Controller

Spent the day today installing a new Blackvue dash cam, just in time to record the cruise to Philip Island next weekend
Install was a bit of a pita, because it involved dropping the headliner to route all the wires. Took about 4 hours all up and another hour or so stuffing around trying to get the camera to connect to my phone.
Also connected up the Vico power plus controller that allows you to manually turn the dash cam on and off and some other neat features...

Pic 1 - New kit
Pic 2 - Install
Pic 3 - Rear camera (interior view)
Pic 4 & 5 - Front camera (interior view)
Pic 6 - Rear camera (external view)
Pic 7 - Front camera (external view)

[Socket]

MOD 42 ZiZa Interior LED Light Kit

Two mods in one day lel
Purchase this kit from Turtles here on the forum (thanks mate )

This upgrade is like swapping out your brown glow stock angel eyes for white aftermarkets.
Was surprised how much of a difference it made..No more brown glow in the interior... should have done this ages ago

Was going to do a DIY on this, but its well covered in the PDF at the end of this post

Pic 1 - New kit
Pics 2 & 3 - Front before and after
Pics 4 & 5 - Rear before and after
Pics 6 & 7 - Puddle lights, before and after

[Socket]

Special mention to EB89 for sending down a set of new black car mats, to go with the new two tone interior. Refused to take anything including postage... Top Bloke... Thanks mate

"EB89 for Prez"

[/335]

Wow at the difference the interior light makes. That first shot with the new lighting looks amaze

[Socket]

Originally Posted by jus335

Wow at the difference the interior light makes. That first shot with the new lighting looks amaze

Thanks Jus
Yes it makes a huge difference TBH, didn't realise how brown the stock interior lighting was until now.
Was never really a fan but like LCI tail lights or LUX angel eyes, it really gives the car a more modern look

[Chappers 71]

:Your ride looks spot on cobber. Well done for not getting a sport, everyone & there dog has one. Imo the SE is much more subtle. Enjoy

[Socket]

Originally Posted by Chappers 71

:Your ride looks spot on cobber. Well done for not getting a sport, everyone & there dog has one. Imo the SE is much more subtle. Enjoy

Thanks for the compliment Chappers, I like ur ride, very clean mate

[EB89]

Originally Posted by Socket

Special mention to EB89 for sending down a set of new black car mats, to go with the new two tone interior. Refused to take anything including postage... Top Bloke... Thanks mate

"EB89 for Prez"

Welcome mate!

[_ink]

Interesting install location for the front cam socks. Doesn't the right side get blocked from the black plastic mirror trim?

[EB89]

Originally Posted by Socket

MOD 42 Blackvue Dash Cam & Vico Power Plus Controller

Spent the day today installing a new Blackvue dash cam, just in time to record the cruise to Philip Island next weekend
Install was a bit of a pita, because it involved dropping the headliner to route all the wires. Took about 4 hours all up and another hour or so stuffing around trying to get the camera to connect to my phone.
Also connected up the Vico power plus controller that allows you to manually turn the dash cam on and off and some other neat features...

Pic 1 - New kit
Pic 2 - Install
Pic 3 - Rear camera (interior view)
Pic 4 & 5 - Front camera (interior view)
Pic 6 - Rear camera (external view)
Pic 7 - Front camera (external view)

Installed before I've done mine!! You don't waste any time.

Did you hook the Vico up to the fuse box? If so which fuses and how did you connect them?

I might have a go tomorrow, when I tried I couldn't get any power to the Vico and it flattened my battery :/

[Socket]

Originally Posted by _ink

Interesting install location for the front cam socks. Doesn't the right side get blocked from the black plastic mirror trim?

Actually yes, I had to move it over towards the passenger side a bit to avoid the mirror housing from being in frame.... well spotted mate

BTW do you know how to turn off the blackvue wifi from asking for a password everytime you it wants to connect to the phone.... it is a major pita

[Socket]

Originally Posted by EB89

Installed before I've done mine!! You don't waste any time.

Did you hook the Vico up to the fuse box? If so which fuses and how did you connect them?

I might have a go tomorrow, when I tried I couldn't get any power to the Vico and it flattened my battery :/

Actually I got lucky when plans we had for this weekend got cancelled otherwise would not have got to this until after next weekends cruise..

Hooked the Vico up to fuses that run along the top of the fuse box (Nos 1 to 12 I think) fuse 2 and 3 have constant power, fuses 7 and 9 have power when ignition is on. The way I worked it out was to hook the Vico and Blackvue up via the cigar socket connector and then used the yellow wire from the Vico on each fuse until I worked out which had power or all the time and which had power only with the ignition on.
Connected by wrapping wire around fuse but will replace this with proper fuse splitters as soon as I can

Ended up running the wires around the front of the dash and mounting the vico here (see pic)
Is tucked out of sight and makes it easy to turn the dash cam off and on via the main switch on the vico

I guess Ill find out in the morning if my battery is flat or not lol

[EB89]

I had another go at mine today, I worked out I had a fuse in the wrong slot in the fuse adaptor, it's all working now , I just haven't routed any of he cables, the cameras are in place though, so the next thing is to do that.

Did you have to drop the entire ceiling peice

[EB89]

And I've just noticed, when I get in and turn the car on, it says "Blackvue shutting down"

Then a few seconds later, "Blackvue for your safety"

It's like it turns off then back on in order to change from park mode to normal driving?

Does yours do that?

And dos you set a safety voltage on the Vico?

[Socket]

Originally Posted by EB89

I had another go at mine today, I worked out I had a fuse in the wrong slot in the fuse adaptor, it's all working now , I just haven't routed any of he cables, the cameras are in place though, so the next thing is to do that.

Did you have to drop the entire ceiling peice

Yes... yes you do, if you want neat cabling and especially if you are installing rear dash cam

Here's my headliner DIY
http://www.e90post.com/forums/showth...ight=headliner