Low coolant temperature

Persian Whisperjet · 02-20-2020, 09:16 AM

Quote:

Originally Posted by e90Noobie

Had the thermo replaced over the weekend. Temp now hovering around 197F. Reset my average MPG counter and got a steady 42mpg driving on the highway for 2 hours at around 70-80mph. MPG started out at 60 and then slowly dropped to 42.

Perfect

siggy55 · 03-01-2020, 05:47 AM

Hi everybody,
I have the same problem on my E91 320d...cold engine (M47) - over 270.000 km.
I had the thermostat fault error code.
After replacing both thermostats, yes I have the EGR thermostat, the error was gone but the cold engine remains.
When outside was 0° C the engine was around 55C, and yesterday with 13C, after the thermostats replacement, it was around 70C. So there is a minor improvement from the faulty thermostat: indeed the mechanic said that the thermostat wasn't really bad.
Other fault error codes still present: 46d1 the auxiliary water pump and 4212,4222, 4232, 4242, one for each glow plug, despite 2 were replaced less than a year ago, so I think there is a problem with the glow plug controller.
I am not sure that the remaining error codes are connected to the cold engine problem.
Any advice?

03-01-2020, 05:47 AM	#112
siggy55 Registered 0 Rep 1 Posts Drives: BMW E91 320d Join Date: Mar 2020 Location: Italy iTrader: (0)	Hi everybody, I have the same problem on my E91 320d...cold engine (M47) - over 270.000 km. I had the thermostat fault error code. After replacing both thermostats, yes I have the EGR thermostat, the error was gone but the cold engine remains. When outside was 0° C the engine was around 55C, and yesterday with 13C, after the thermostats replacement, it was around 70C. So there is a minor improvement from the faulty thermostat: indeed the mechanic said that the thermostat wasn't really bad. Other fault error codes still present: 46d1 the auxiliary water pump and 4212,4222, 4232, 4242, one for each glow plug, despite 2 were replaced less than a year ago, so I think there is a problem with the glow plug controller. I am not sure that the remaining error codes are connected to the cold engine problem. Any advice?
	Appreciate 0 Quote