25.1.1 works!!!

BK · 05-15-2007, 11:51 AM

Quote:

Originally Posted by Slaz

Did the iDrive upgrade mess with any of your nav settings or data - e.g. did you keep your existing Address Book entries etc.?

I was hoping that it would speed the I Drive up as well but clearly not from your experience.

No, it did not mess up my address book entries for the nav. Thankfully!

I should add that it also did not mess up two things I was concerned it might mess up. First, my mirrors still fold in when I lock using CA. I was worried they might have done away with that like they have on the 07 models.

Second, my fasten seat belt chime still only dings twice then stops (but the light remains lit). Other E90s I have been in keep ringing until you put on the belt.

Everyone else seems to be reporting a boost in speed from their iDrive, so odds are that you will, too. I do not see a speed increase. However, my iDrive was not unbearable before the update. Maybe other people had software versions in between my old version, which had the old font and old menus, and this new version -- and maybe those intermediate software versions were slower than mine.

BK · 05-15-2007, 02:16 PM

Quote:

Originally Posted by poiney

BK,
Is there any way to save the memory settings (like address book, sat radio, etc.)?

I have had my Navi crash sporadically since I've had it, so I want to have it updated with new version -- hopefully it will fix these.

Good luck! I don't know how to save memory settings, but you may want to mention it to your SA.

My nav address book remained intact. The phone address book is stored in my phone, so that would be fine. I don't have sat radio, but all of my radio presets and audio settings were deleted or reset. Settings for unlock, lighting, speed limit, etc. remained intact.

poiney · 05-15-2007, 02:30 PM

It was mainly the address book that matters to me, given the complexity of reentering those. OTOH, maybe with the new update, it will be easier and I will be able to do these verbally as the manual states. THanks.

Lucid4000 · 05-15-2007, 05:56 PM

I just got the new update and its keeps on reseting itself and I have no sound what so ever. Can anyone help??

poiney · 05-15-2007, 06:34 PM

ut oh, maybe I better wait on that update!

Kimo · 05-15-2007, 08:42 PM

Quote:

Originally Posted by BK

Some of my thoughts, moving from PROGMAN 21 to 25.01.01. <snip>

Nice writeup. Can you now enter Nav data via voice??

X5FX · 05-15-2007, 08:43 PM

I just had the update installed...as reported UI is nicer, it seems a bit faster, a few little improvements like:
1. Map stays up when restarting car (dont have to go back thru menus)
2. POI search
3. audio sources now go instantly to source, no need to enter "play"
4. arrow pops up when navigating on smaller screen (but this does not work when nav is selected in HUD)
5. route line on map is now clear
6. bluetooth connects faster

BTW-
The tech stated he installed ver 25.2
RTTI is working, VC is working, evertyhing works great and it was installed in one day.

All my settings are intact, except the 6 preset buttons for the IDrive, they are all gone.

faqulars · 05-15-2007, 09:16 PM

has anyone checked to see if their high beams worked after the update. I push the stalk away from me and nothing happens. If I pull towards me the high beams still flash though.

BK · 05-16-2007, 12:02 AM

Quote:

Originally Posted by Kimo

Nice writeup. Can you now enter Nav data via voice??

Thanks. I have not tried entering nav via voice yet. I'll try tomorrow.

Quote:

Originally Posted by faqulars

has anyone checked to see if their high beams worked after the update. I push the stalk away from me and nothing happens. If I pull towards me the high beams still flash though.

Yikes. I better try that, too.

BTW - it looks like I was wrong about my fasten seat belt thing. I must have buckled up quickly enough before that I thought it still was the same. It used to "beep" twice only, then stop. Now it continues beeping until you fasten the belt, just like on everyone else's car. Oh well, I guess that's how it's supposed to be.

Also, I said it didn't seem any more responsive on my car. While that is true, after using it more, I do think it boots up a little quicker.

X5FX · 05-16-2007, 12:23 AM

Quote:

Originally Posted by faqulars

has anyone checked to see if their high beams worked after the update. I push the stalk away from me and nothing happens. If I pull towards me the high beams still flash though.

mine work after the update

snareman · 05-16-2007, 10:57 AM

Just got my car back yesterday. My dealer said they installed 25.01. I asked about .01.01, but they didn't seem to quite know. They said they just got this version in last week. Not sure if I got just 25.01 or .01.01.

I had to rest most of the things, but interestingly my phone was still paired.

Also had the ipod adaptor installed and it seems to work pretty well so far in the little bit of time I've had to mess with it.

I wish they'd get rid of that increased feedbacl/resistance thing when turning the idrive controller. I'd like to just be able to scroll down through my list of songs without getting the increased feedback. Or maybe just have the increase at the very bottom of the list, not when I'm at the bottom of the screen with 50 songs left to scroll through.

Blue328xi · 05-16-2007, 11:28 AM

Quote:

Originally Posted by snareman

I wish they'd get rid of that increased feedbacl/resistance thing when turning the idrive controller. I'd like to just be able to scroll down through my list of songs without getting the increased feedback. Or maybe just have the increase at the very bottom of the list, not when I'm at the bottom of the screen with 50 songs left to scroll through.

Amen to that, its really bad. And it doesnt even work properly on mine, if I scroll past the dents on the first page it jumps back.

xMSMx · 05-16-2007, 12:37 PM

Well, my car has completed production today, so I really hope i get the 25.01.01 version, I'm going to try to call BMW USA and maybe they can check what software version I got?

bartman32 · 05-16-2007, 01:49 PM

If it went into production today it would probably be 25.02

nyc3r · 05-16-2007, 02:02 PM

Quote:

Originally Posted by Lucid4000

I just got the new update and its keeps on reseting itself and I have no sound what so ever. Can anyone help??

no sound as in no voice guide in nav or no audio/music? If nav, try uping the volume of voice guide.

Kimo · 05-16-2007, 02:03 PM

Quote:

Originally Posted by X5FX

I just had the update installed...
4. arrow pops up when navigating on smaller screen (but this does not work when nav is selected in HUD)

What!!???

Are you saying that the arrow does not automatically come up in the Assist Window when approaching a turn if the Nav Map is displayed in the main window?? This is one of the primary fixes of v. 25.

Not sure what you are referring to by "HUD".

X5FX · 05-16-2007, 02:50 PM

Quote:

Originally Posted by Kimo

What!!???

Are you saying that the arrow does not automatically come up in the Assist Window when approaching a turn if the Nav Map is displayed in the main window?? This is one of the primary fixes of v. 25.

Not sure what you are referring to by "HUD".

NO
HUD=Heads Up Display

If you have the HUD option, and choose to display Nav info in the HUD, the pop-up on the small screen does not appear. Otherwise, yes this fixes the issue.

bartman32 · 05-16-2007, 02:52 PM

Quote:

Originally Posted by X5FX

NO
HUD=Heads Up Display

If you have the HUD option, and choose to display Nav info in the HUD, the pop-up on the small screen does not appear. Otherwise, yes this fixes the issue.

Head's up display? 3 series doesn't have that. It's only on the 5

X5FX · 05-16-2007, 03:09 PM

sorry, I am in an X5

but we both have the same Progman software

BK · 05-16-2007, 05:38 PM

My work statement for the software update says "PROGRAMED [sic] CONTROL UNITS INCLUDING CAS, INTIALIZED [sic] SUNROOF WINDOWS AND SET COMPRESSOR INLET."

Resetting the sunroof and windows - I guess I could see how you might have to do that after updating the software. But "set compressor inlet"? What is that all about? It sounds like it's turbo-related, but I have a 330i. Air conditioning, maybe?

cobradac · 05-16-2007, 10:13 PM

While the PROGMAN LEVEL is the same it is not the same software. Your Target Data Status for Progman 25.01.00 = E070-07-03-515 while for an E90/91/92/93 PROGMAN 25.01.00 = Target Data Status of E89x-07-03-520. There will be specific and unique code for X5 vs E90 vs E60/63. Of course many similarities should exist as well.

Quote:

Originally Posted by X5FX

sorry, I am in an X5

but we both have the same Progman software

BBMMWW · 05-17-2007, 11:40 AM

i upgraded my software from v24 to v25 (first version) a few weeks ago.
As most of you, my RTTI stopped working until... today!

For no apparent reason it started working again. I didn't change any setting.
I crossed over from belgium to netherland this morning (and back), could it be the change of country that made it work again?

05-15-2007, 02:30 PM	#113
poiney Captain 38 Rep 798 Posts Drives: 328i coupe Join Date: Dec 2006 Location: SJ iTrader: (0)	It was mainly the address book that matters to me, given the complexity of reentering those. OTOH, maybe with the new update, it will be easier and I will be able to do these verbally as the manual states. THanks.
	Appreciate 0 Quote

05-15-2007, 05:56 PM	#114
Lucid4000 Major 59 Rep 1,190 Posts Drives: 335i AW Sport 6MT Join Date: Jan 2006 Location: NYC!! iTrader: (5) Garage List 2006 330i Sport [0.00]	I just got the new update and its keeps on reseting itself and I have no sound what so ever. Can anyone help?? __________________ Mobile Addictions 718.877.7700 or info@mobile-addictions.com www.mobile-addictions.com
	Appreciate 0 Quote

05-15-2007, 06:34 PM	#115
poiney Captain 38 Rep 798 Posts Drives: 328i coupe Join Date: Dec 2006 Location: SJ iTrader: (0)	ut oh, maybe I better wait on that update!
	Appreciate 0 Quote

05-15-2007, 08:43 PM	#117
X5FX First Lieutenant 53 Rep 343 Posts Drives: 2015 X5 35i M Sport Join Date: Mar 2007 Location: in my X5 iTrader: (0)	I just had the update installed...as reported UI is nicer, it seems a bit faster, a few little improvements like: 1. Map stays up when restarting car (dont have to go back thru menus) 2. POI search 3. audio sources now go instantly to source, no need to enter "play" 4. arrow pops up when navigating on smaller screen (but this does not work when nav is selected in HUD) 5. route line on map is now clear 6. bluetooth connects faster BTW- The tech stated he installed ver 25.2 RTTI is working, VC is working, evertyhing works great and it was installed in one day. All my settings are intact, except the 6 preset buttons for the IDrive, they are all gone. __________________ 2015 X5 35i M Sport
	Appreciate 0 Quote

05-15-2007, 09:16 PM	#118
faqulars Enlisted Member 3 Rep 39 Posts Drives: E46 M3 / e60 530I / 135I Join Date: Feb 2006 Location: Virginia iTrader: (0)	has anyone checked to see if their high beams worked after the update. I push the stalk away from me and nothing happens. If I pull towards me the high beams still flash though.
	Appreciate 0 Quote

05-16-2007, 10:57 AM	#121
snareman Leave the gun. Take the Canoli. 10232 Rep 8,348 Posts Drives: ///M8 & X5 ///M60 Join Date: Dec 2006 Location: Ohio iTrader: (0)	Just got my car back yesterday. My dealer said they installed 25.01. I asked about .01.01, but they didn't seem to quite know. They said they just got this version in last week. Not sure if I got just 25.01 or .01.01. I had to rest most of the things, but interestingly my phone was still paired. Also had the ipod adaptor installed and it seems to work pretty well so far in the little bit of time I've had to mess with it. I wish they'd get rid of that increased feedbacl/resistance thing when turning the idrive controller. I'd like to just be able to scroll down through my list of songs without getting the increased feedback. Or maybe just have the increase at the very bottom of the list, not when I'm at the bottom of the screen with 50 songs left to scroll through. __________________ Current: 2023 M8 \|\|\| 2025 X5 M60 Retired: 2023 X3 M40 \|\|\| 2021 M4 \|\|\| 2018 M4 \|\|\| 2017 M4 \|\|\| 2014 435 \|\|\| 2009 335 \|\|\| 2007 335
	Appreciate 0 Quote

05-16-2007, 12:37 PM	#123
xMSMx Second Lieutenant 40 Rep 268 Posts Drives: 2007 TiAg 328i coupe/coral red Join Date: Aug 2006 Location: ANAHEIM HILLS iTrader: (0)	Well, my car has completed production today, so I really hope i get the 25.01.01 version, I'm going to try to call BMW USA and maybe they can check what software version I got? __________________ PREVIOUS: 2000 BMW 323ci(sold),2007 BMW 328i(RIP), 2007 BMW 328i(lease return) CURRENT: 2011 528i f10 Titanium Silver/Cinnamon Brown/Aluminum/Premium/Sport/Navigation/Comfort Access/Smart Phone Integration/ I-pod-USB
	Appreciate 0 Quote

05-16-2007, 01:49 PM	#124
bartman32 Colonel 108 Rep 2,317 Posts Drives: F87 M2 Join Date: Feb 2007 Location: The OC iTrader: (0) Garage List 2017 M2 [0.00]	If it went into production today it would probably be 25.02
	Appreciate 0 Quote

05-16-2007, 03:09 PM	#129
X5FX First Lieutenant 53 Rep 343 Posts Drives: 2015 X5 35i M Sport Join Date: Mar 2007 Location: in my X5 iTrader: (0)	sorry, I am in an X5 but we both have the same Progman software __________________ 2015 X5 35i M Sport
	Appreciate 0 Quote

05-16-2007, 05:38 PM	#130
BK Smiling politely 175 Rep 7,931 Posts Drives: 330i Join Date: Feb 2006 Location: Washington DC iTrader: (0) Garage List 2006 330i [9.00]	My work statement for the software update says "PROGRAMED [sic] CONTROL UNITS INCLUDING CAS, INTIALIZED [sic] SUNROOF WINDOWS AND SET COMPRESSOR INLET." Resetting the sunroof and windows - I guess I could see how you might have to do that after updating the software. But "set compressor inlet"? What is that all about? It sounds like it's turbo-related, but I have a 330i. Air conditioning, maybe? __________________ E90 330i Black Sapphire 6MT \| 991.1 C4 Platinum Silver 7MT
	Appreciate 0 Quote

05-17-2007, 11:40 AM	#132
BBMMWW New Member 0 Rep 18 Posts Drives: E92 325i Join Date: Mar 2007 Location: Belgium iTrader: (0)	i upgraded my software from v24 to v25 (first version) a few weeks ago. As most of you, my RTTI stopped working until... today! For no apparent reason it started working again. I didn't change any setting. I crossed over from belgium to netherland this morning (and back), could it be the change of country that made it work again?
	Appreciate 0 Quote