Need Help: Cant Pass Inspection

kevBquick · 02-06-2016, 12:12 AM

clearly you guys are doing it wrong. i have some personal stuff do deal with. i will see if i can post to both a r e a 7 4 and b i m m e r f o r u m s for the DIY with clear install and easy to follow directions tomorrow.

there is nothing wrong with the unit you are not supposed to ground to any bolt. i will fix your problems. just had problems of my own and then these forum issues. i'll hook it up all over the net.

kevBquick · 02-06-2016, 07:05 AM

DIY

Seamus · 02-06-2016, 10:34 AM

Quote:

Originally Posted by kevBquick

DIY

You're the man Kevin. Can I ask what mods you have that your getting those dyno numbers? Have you upgraded turbos?

kevBquick · 02-07-2016, 01:15 PM

Quote:

Originally Posted by jamesey271975

You're the man Kevin. Can I ask what mods you have that your getting those dyno numbers? Have you upgraded turbos?

FBO...stock turbo.

tuning by me.

M.a.r.k.u.s · 02-07-2016, 02:05 PM

Quote:

Originally Posted by kevBquick

DIY

Beautiful write up! Thanks for taking the time and doing this!

j23a45m · 02-07-2016, 02:31 PM

My ses is on with this but I think I need to adjust the jb4.
It's telling me low pressure sensor, and low fuel preasure.

No other codes present

Seamus · 02-07-2016, 03:16 PM

Quote:

Originally Posted by j23a45m

My ses is on with this but I think I need to adjust the jb4.
It's telling me low pressure sensor, and low fuel preasure.

No other codes present

are your monitors all set to Ready?

j23a45m · 02-07-2016, 11:23 PM

Quote:

Originally Posted by jamesey271975

are your monitors all set to Ready?

Logging some miles to be sure of that but it's looking good

kevBquick · 02-08-2016, 12:16 AM

Quote:

Originally Posted by j23a45m

My ses is on with this but I think I need to adjust the jb4.
It's telling me low pressure sensor, and low fuel preasure.

No other codes present

just reset codes with jb4, which is 1/2 on the steering wheel. thats not a cat sim thing.

i don't like any codes or lights while i drive

kevBquick · 02-08-2016, 12:23 AM

Quote:

Originally Posted by M.a.r.k.u.s

Beautiful write up! Thanks for taking the time and doing this!

very welcome. sorry it took a bit. had tons more pics but i narrowed it down to what i felt was important. i wanted to go out get tool bit sizes i used but my kids and dog were all bugging so. i had to settle.

i maybe update with it in a bit.

sorry it took so long.....life caught me be surprise on this. not something i wanted to deal with. but nothing i could do either.

but i'm always here for the community. or install questions. this DIY should be pretty straight forward from there. we should 100% perfect installs on this.

just make sure you are securing your connections biggest thing. loose connections will not allow the cat sim to do its job.

that car is off and it doesn't cycle power during. so keys out of ignition. i think 74 tells you those things in the little pamphlet that he sends. but just to reemphasize.

i do one wire at a time. stripping one at a time. i don't let them come in contact with anything. good solid contacts and you should have thing in...in 15 minutes and working 100%.

Seamus · 02-13-2016, 12:45 PM

Still no other users anything to report on this? Seems like there were a ton of orders several weeks ago. Anyone else have it installed and monitors set?

Rahim e92 · 02-13-2016, 02:00 PM

Quote:

Originally Posted by jamesey271975

Still no other users anything to report on this? Seems like there were a ton of orders several weeks ago. Anyone else have it installed and monitors set?

http://www.e90post.com/forums/showthread.php?t=1087036

jwalker87 · 02-13-2016, 02:22 PM

Installed and working beautifully. I don't have a scanner to see readiness, but no CEL or codes...

around · 02-14-2016, 04:07 PM

Quote:

Originally Posted by jwalker87

Installed and working beautifully. I don't have a scanner to see readiness, but no CEL or codes...

nice!!! thanks jwalker

jus2sikwitit · 12-25-2016, 01:31 PM

Quote:

Originally Posted by kevBquick

Quote:

Originally Posted by M.a.r.k.u.s

Beautiful write up! Thanks for taking the time and doing this!

very welcome. sorry it took a bit. had tons more pics but i narrowed it down to what i felt was important. i wanted to go out get tool bit sizes i used but my kids and dog were all bugging so. i had to settle.

i maybe update with it in a bit.

sorry it took so long.....life caught me be surprise on this. not something i wanted to deal with. but nothing i could do either.

but i'm always here for the community. or install questions. this DIY should be pretty straight forward from there. we should 100% perfect installs on this.

just make sure you are securing your connections biggest thing. loose connections will not allow the cat sim to do its job.

that car is off and it doesn't cycle power during. so keys out of ignition. i think 74 tells you those things in the little pamphlet that he sends. but just to reemphasize.

i do one wire at a time. stripping one at a time. i don't let them come in contact with anything. good solid contacts and you should have thing in...in 15 minutes and working 100%.

i installed the ****** io2 in my n55 and for some reason the green LED isnt lighting up im not sure if it is working or not but the car is running as it was b4 i installed it...any thoughts?

///Mposter · 12-25-2016, 10:01 PM

Quote:

Originally Posted by jus2sikwitit

Quote:

Originally Posted by kevBquick

Quote:

Originally Posted by M.a.r.k.u.s

Beautiful write up! Thanks for taking the time and doing this!

very welcome. sorry it took a bit. had tons more pics but i narrowed it down to what i felt was important. i wanted to go out get tool bit sizes i used but my kids and dog were all bugging so. i had to settle.

i maybe update with it in a bit.

sorry it took so long.....life caught me be surprise on this. not something i wanted to deal with. but nothing i could do either.

but i'm always here for the community. or install questions. this DIY should be pretty straight forward from there. we should 100% perfect installs on this.

just make sure you are securing your connections biggest thing. loose connections will not allow the cat sim to do its job.

that car is off and it doesn't cycle power during. so keys out of ignition. i think 74 tells you those things in the little pamphlet that he sends. but just to reemphasize.

i do one wire at a time. stripping one at a time. i don't let them come in contact with anything. good solid contacts and you should have thing in...in 15 minutes and working 100%.

i installed the ****** io2 in my n55 and for some reason the green LED isnt lighting up im not sure if it is working or not but the car is running as it was b4 i installed it...any thoughts?

Make sure power and ground to the box have a good connection. The LED light is powered by those wires. If you are using wire taps, make sure you can see the wire split and make contact. If not help it by spreading the wires jacket open. Or use another splice method like soldering.

jus2sikwitit · 12-25-2016, 10:39 PM

ill definitely check it out thanks for the advice

sd306 · 12-29-2016, 03:19 AM

Quote:

Originally Posted by jus2sikwitit

ill definitely check it out thanks for the advice

Check out my diy for the catsim. Search on google

jus2sikwitit · 02-24-2017, 11:33 PM

finally installed catsim correctly. i was worried i burned the unit on the initial install but i used the positaps from amazon in the power and ground wires and butt splices for the other 2 connections and viola!!! just waiting and driving for this god damn evap monitor to go green other then that working flawless thanks kev and 74!

maxihari · 02-27-2017, 10:34 AM

Kinda related Q:
N55 people and JB4 steering wheel controls:

How do you turn off autoclear of codes (menu controls 1.3 and 1.4 seem to be not working for me)

I KNOW I have CEL due to cat, but as soon as I connect JB4 up, it goes away...

opjose · 03-04-2017, 05:02 PM

Quote:

Originally Posted by maxihari

Kinda related Q:
N55 people and JB4 steering wheel controls:

How do you turn off autoclear of codes (menu controls 1.3 and 1.4 seem to be not working for me)

I KNOW I have CEL due to cat, but as soon as I connect JB4 up, it goes away...

Turning on map 0 also turns off auto clear.

AX75F92 · 03-05-2017, 04:27 AM

Are you guys getting the 02 related readiness to clear just by doing the factory drive cycle? Did the cycle twice but the 02 and evap still not ready.

02-06-2016, 12:12 AM	#111
kevBquick Private First Class 40 Rep 156 Posts Drives: 2015 M3 Join Date: Dec 2013 Location: United States iTrader: (0)	clearly you guys are doing it wrong. i have some personal stuff do deal with. i will see if i can post to both a r e a 7 4 and b i m m e r f o r u m s for the DIY with clear install and easy to follow directions tomorrow. there is nothing wrong with the unit you are not supposed to ground to any bolt. i will fix your problems. just had problems of my own and then these forum issues. i'll hook it up all over the net. __________________ 2015 M3 MW 6MT - BM3 \| iND 2011 335xi MSport - Alpina shifted FBO on E85 - 388awhp/482awtq
	Appreciate 1 Quote

02-07-2016, 02:31 PM	#116
j23a45m Captain 46 Rep 696 Posts Drives: 2012 E70 X5 Join Date: Aug 2013 Location: Lancaster, Pa iTrader: (9) Garage List 2016 Jeep grand che ... [0.00] 2016 S1000RR [0.00] 2012 Bmw X5 35i [0.00]	My ses is on with this but I think I need to adjust the jb4. It's telling me low pressure sensor, and low fuel preasure. No other codes present __________________ 2011 BSM 335i E90 MTECH 6MT • JB4 stage 2 iso 5.3 FF wire• BMS Intake • Vishnu DP • Cyba Scoops • LUX V4 • 6000K Headlight/Fog light Philips Ultinon • Euro headlight switch • ACS roof wing • 35% tint • Performance Grilles • Misc coding • Cobb charge pipe • ///M3 fenders • 335is pedals • BC Coilovers • Vrsf 7" IC • ///M3 mirrors •
	Appreciate 0 Quote

02-13-2016, 12:45 PM	#121
Seamus Lieutenant 21 Rep 488 Posts Drives: E92 2011 335xi Join Date: Sep 2012 Location: salt lake city iTrader: (5) Garage List 2011 335xi [0.00]	Still no other users anything to report on this? Seems like there were a ton of orders several weeks ago. Anyone else have it installed and monitors set? __________________ 2011 E92 335xi, Cobb ProTune, Cobb FMIC, Catless DP, BMW Performance Exhaust, aFe stage 2 intake, BMS Chargepipe, Alpina B3 - BUT NOT ENOUGH POWER!
	Appreciate 0 Quote

02-13-2016, 02:22 PM	#123
jwalker87 Major 336 Rep 1,034 Posts Drives: '08 335i, '11 335xi, '01 Z3M Join Date: Jul 2010 Location: Pittsburgh, PA iTrader: (2)	Installed and working beautifully. I don't have a scanner to see readiness, but no CEL or codes... __________________ 2001 e36/7 M Roadster 5spd 2008 e90 335i 6spd 2011 e90 335xi 6spd 2011 e70 x5 diesel 2010 Ducati Monster 696
	Appreciate 0 Quote

12-25-2016, 10:39 PM	#127
jus2sikwitit Private 7 Rep 53 Posts Drives: e92 335i xdrive Join Date: Jul 2014 Location: new york iTrader: (0)	ill definitely check it out thanks for the advice
	Appreciate 0 Quote

02-24-2017, 11:33 PM	#129
jus2sikwitit Private 7 Rep 53 Posts Drives: e92 335i xdrive Join Date: Jul 2014 Location: new york iTrader: (0)	finally installed catsim correctly. i was worried i burned the unit on the initial install but i used the positaps from amazon in the power and ground wires and butt splices for the other 2 connections and viola!!! just waiting and driving for this god damn evap monitor to go green other then that working flawless thanks kev and 74! Attached Images
	Appreciate 0 Quote

02-27-2017, 10:34 AM	#130
maxihari Second Lieutenant 47 Rep 272 Posts Drives: 2011 335i MSport 6spd Join Date: Feb 2016 Location: Chicago iTrader: (0)	Kinda related Q: N55 people and JB4 steering wheel controls: How do you turn off autoclear of codes (menu controls 1.3 and 1.4 seem to be not working for me) I KNOW I have CEL due to cat, but as soon as I connect JB4 up, it goes away... __________________ 2011 MSport 6spd FBO, Pure Stage 1, JB4, and MHD - custom tune
	Appreciate 1 Cure1228.50 Quote

03-05-2017, 04:27 AM	#132
AX75F92 Private 7 Rep 97 Posts Drives: 335 Join Date: Jul 2015 Location: oc iTrader: (0)	Are you guys getting the 02 related readiness to clear just by doing the factory drive cycle? Did the cycle twice but the 02 and evap still not ready.
	Appreciate 1 jus2sikwitit7.00 Quote