Aussies thoughts on the MHD Flasher.

turtleman · 09-19-2015, 10:48 PM

Anyone have any luck connecting the mhd app to a 2009 model? I bought 2 different 2 k+dcan and can't get it to connect. I know my otg cable definetly works and i've tried the setup on a galaxy note tab, nexus 7 2012 and s6.

chappy · 09-20-2015, 12:40 AM

Still reading a couple of hundred pages about MHD flash looks very good, I connected my cable to the car and all good, now I just got to think about pulling out my Procede V2.5 and flashing with MHD
Most guys in the USA are selling the Cobb and buying MHD.
sounds promising.

Aus335iguy · 09-20-2015, 05:53 AM

Quote:

Originally Posted by turtleman

Anyone have any luck connecting the mhd app to a 2009 model? I bought 2 different 2 k+dcan and can't get it to connect. I know my otg cable definetly works and i've tried the setup on a galaxy note tab, nexus 7 2012 and s6.

Mine is an MY9.5 and it works fine for me

turtleman · 09-20-2015, 07:36 AM

Quote:

Originally Posted by Aus335iguy

Mine is an MY9.5 and it works fine for me

Are you using any specific cable (eg bt cable) or just one bought off ebay? If you bought it off ebay, do you by any chance remember who the seller was? Thanks.

JRAD7 · 09-20-2015, 11:06 AM

Quote:

Originally Posted by Scotty89

Engine is running strong, no software/tuning problems at all since switching to MHD + custom map.

It does however show up which mechanical parts are not doing their job - just had to replace boost solenoids and what not. Also tyres don't last long anymore.

Who did you go with for a custom map? I've been reading a lot about wedge and BaraQ and how they've been able to produce really good results using a new tuning approach. I'm also considering a custom map from PTF

Aus335iguy · 09-20-2015, 04:24 PM

Quote:

Originally Posted by turtleman

Quote:

Originally Posted by Aus335iguy

Mine is an MY9.5 and it works fine for me

Are you using any specific cable (eg bt cable) or just one bought off ebay? If you bought it off ebay, do you by any chance remember who the seller was? Thanks.

Bimmer software cable I tried one from ebay. Waste of time. I'm on Sydney's north shore near Chatswood if you want to borrow a cable.

bradsm87 · 09-20-2015, 05:35 PM

After getting two dodgy cables, I can fairly confidently say that you'll get a solid working cable by:

Search aliexpress.com for "BMW DCAN" then sort results by seller rating.

Buy the first one that advertises that it's green PCB in the title. Make sure sellers positive feedback is at least 97.5%. Mine was US$15 plus US$15 express shipping and works a treat.

I had so much trouble on both eBay and aliexpress with green PCB items pictured and I put in the purchase notes "must be green PCB" and white PCB turned up and they only gave me partial refunds.

turtleman · 09-20-2015, 07:20 PM

Thanks Aus335iguy and bradsm87. I'll purchase a cable from bimmer software as they seem to have pretty good reviews and even MHD was recommending them.

Scotty89 · 09-21-2015, 05:17 PM

Quote:

Originally Posted by JRAD7

Who did you go with for a custom map? I've been reading a lot about wedge and BaraQ and how they've been able to produce really good results using a new tuning approach. I'm also considering a custom map from PTF

JRAD7 I have a custom flash from Wedge Performance, it has been great so far.

bmwheath · 09-21-2015, 06:57 PM

Quote:

Originally Posted by chappy

Still reading a couple of hundred pages about MHD flash looks very good, I connected my cable to the car and all good, now I just got to think about pulling out my Procede V2.5 and flashing with MHD
Most guys in the USA are selling the Cobb and buying MHD.
sounds promising.

Im going this route as well Chappy. Waiting on cable to arrive, then JD75 & Tribola are going to tweak my car with a custom tune for maximum POWAAA!!!
See if it will break my stock turbo 1/4 mile record

JRAD7 · 09-22-2015, 12:23 AM

Quote:

Originally Posted by Scotty89

JRAD7 I have a custom flash from Wedge Performance, it has been great so far.

Thanks Scotty, good to know!

chappy · 09-22-2015, 12:41 AM

Quote:

Originally Posted by bmwheath

Im going this route as well Chappy. Waiting on cable to arrive, then JD75 & Tribola are going to tweak my car with a custom tune for maximum POWAAA!!!
See if it will break my stock turbo 1/4 mile record

You could of borrowed my cable bmwheath.
Are JD75 and Tribola from the gold coast.
I guess you are going for a backend flash.
I'm not FBO yet, I don't know if I will get downpipes just yet.
Yet us know how you go with the flashing.
I'm tempting to pull out the procede on the weekend maybe.

bmwheath · 09-22-2015, 03:42 AM

Quote:

Originally Posted by chappy

You could of borrowed my cable bmwheath.
Are JD75 and Tribola from the gold coast.
I guess you are going for a backend flash.
I'm not FBO yet, I don't know if I will get downpipes just yet.
Yet us know how you go with the flashing.
I'm tempting to pull out the procede on the weekend maybe.

Jd75 "Justin" i believe is from Sydney?? He sells may parts to guys on here and is a great guys to turn to for assistance. Ive bought my FuelIt stage 2 pump & 3.5 bar map sensor & adaptor from Justin so far and very impressed with his professionalism.
Trebila does the custom MHD tunes to suit your car & particular needs.
Thanks for the offer of the cable, they are cheap as chips so at least we will all have one lol

Let me know how you go with it as i am waiting for my inlets to come from RB in the states, then i will have extracted as much as i can out of the stock turbos, close to 500rwhp would be nice on stockers

bmwheath · 09-22-2015, 03:45 AM

Id love to take you for a run in mine now Chappy so you can see what kind of power your missing out on!! Im already running the E85 backend flash on map7 on JB4 and running about 20-21psi peak boost.
The Trebila custom flash tune with hopefully net me 25psi with the new RB inlets on

_ink · 09-22-2015, 05:16 AM

Quote:

Originally Posted by JRAD7

Quote:

Originally Posted by Scotty89

Engine is running strong, no software/tuning problems at all since switching to MHD + custom map.

It does however show up which mechanical parts are not doing their job - just had to replace boost solenoids and what not. Also tyres don't last long anymore.

Who did you go with for a custom map? I've been reading a lot about wedge and BaraQ and how they've been able to produce really good results using a new tuning approach. I'm also considering a custom map from PTF

I'd recommend the guy that I'm using. His name is Trebila (David), and knows everything that needs to be done for EU/AU cars.

He's also helped Terry from Burger on some of his flash maps for post shift timing.

bmwheath · 09-22-2015, 08:12 AM

Quote:

Originally Posted by _ink

I'd recommend the guy that I'm using. His name is Trebila (David), and knows everything that needs to be done for EU/AU cars.

He's also helped Terry from Burger on some of his flash maps for post shift timing.

+1 thats who will be doing mine

JRAD7 · 09-22-2015, 08:45 AM

Quote:

Originally Posted by _ink

I'd recommend the guy that I'm using. His name is Trebila (David), and knows everything that needs to be done for EU/AU cars.

He's also helped Terry from Burger on some of his flash maps for post shift timing.

Cool, thanks for the tip ink. Does he do mhd only tunes or just mhd/jb4 stacked tunes?

_ink · 09-23-2015, 07:38 AM

Quote:

Originally Posted by JRAD7

Cool, thanks for the tip ink. Does he do mhd only tunes or just mhd/jb4 stacked tunes?

Although he can, he has said he prefers to only work with JB4 stacked.

Probs due to the safety features the JB4 provides.

PG · 10-11-2015, 12:08 AM

Hey guys can any of you link me to a cable that you know works 100 percent. I got the ebay one that's linked here form Melbourne. It is recognised by the phone but not the app itself.

Aus335iguy · 10-11-2015, 06:08 AM

Quote:

Originally Posted by PG_DC5

Hey guys can any of you link me to a cable that you know works 100 percent. I got the ebay one that's linked here form Melbourne. It is recognised by the phone but not the app itself.

Bimmer software dot com.

PG · 10-11-2015, 07:01 AM

Quote:

Originally Posted by Aus335iguy

Bimmer software dot com.

thanks I just ended up ordering it an hour ago. I wonder how long it takes to arrive, bloody 95 bucks for a cable!

Mayuri Krab · 10-31-2015, 09:48 PM

Thinking of doing a mhd backed flash with my JB4, does the off the shelf maps they provide work fine?

Only be using the pump gas (98 Ron equivalent one), no ethanol or anything fancy.

Would there be error codes generated due to those maps being designed for us-spec cars?

09-19-2015, 10:48 PM	#111
turtleman Private 1 Rep 70 Posts Drives: 2009 335i Join Date: Aug 2015 Location: Melbourne iTrader: (0)	Anyone have any luck connecting the mhd app to a 2009 model? I bought 2 different 2 k+dcan and can't get it to connect. I know my otg cable definetly works and i've tried the setup on a galaxy note tab, nexus 7 2012 and s6.
	Appreciate 0 Quote

09-20-2015, 12:40 AM	#112
chappy Captain 108 Rep 693 Posts Drives: 335 M-SPORT COUPE Join Date: Nov 2008 Location: Brisbane Australia iTrader: (0)	Still reading a couple of hundred pages about MHD flash looks very good, I connected my cable to the car and all good, now I just got to think about pulling out my Procede V2.5 and flashing with MHD Most guys in the USA are selling the Cobb and buying MHD. sounds promising. __________________ THE BEAST MHD Flash Tune /M3 suspension/Forge Intercooler/Alpina B3 AT Flash/Bilstein B4 Suspension/BMW OEM M3 Steering Wheel and DCT Paddles/LUX V4 Angel Eyes/CIC Retrofitted
	Appreciate 0 Quote

09-20-2015, 05:35 PM	#117
bradsm87 Lieutenant Colonel 603 Rep 1,693 Posts Drives: F25 LCI xDrive30d Join Date: Jun 2013 Location: Australia iTrader: (0)	After getting two dodgy cables, I can fairly confidently say that you'll get a solid working cable by: Search aliexpress.com for "BMW DCAN" then sort results by seller rating. Buy the first one that advertises that it's green PCB in the title. Make sure sellers positive feedback is at least 97.5%. Mine was US$15 plus US$15 express shipping and works a treat. I had so much trouble on both eBay and aliexpress with green PCB items pictured and I put in the purchase notes "must be green PCB" and white PCB turned up and they only gave me partial refunds.
	Appreciate 0 Quote

09-20-2015, 07:20 PM	#118
turtleman Private 1 Rep 70 Posts Drives: 2009 335i Join Date: Aug 2015 Location: Melbourne iTrader: (0)	Thanks Aus335iguy and bradsm87. I'll purchase a cable from bimmer software as they seem to have pretty good reviews and even MHD was recommending them.
	Appreciate 0 Quote

09-22-2015, 03:45 AM	#124
bmwheath 11 second stock turbo club. 11.6@120mph 116 Rep 1,181 Posts Drives: 2007 335i Join Date: Jan 2015 Location: Australia iTrader: (0)	Id love to take you for a run in mine now Chappy so you can see what kind of power your missing out on!! Im already running the E85 backend flash on map7 on JB4 and running about 20-21psi peak boost. The Trebila custom flash tune with hopefully net me 25psi with the new RB inlets on __________________ JB4 ISO - 3" Catless Downpipes - RB Inlets to be fitted - BMS DCI - VRSF 7" intercooler - Charge pipe & Raceport BOV - BMW PE exhaust - Stage 2 fuel pump - BMS E85 Flash/ E50 mix, running map7 - NGK Plugs - BMS Catchcan - RB pcv valve - Quaife LSD - 19'' Beyern wheels - Msport suspension - M3 rep sideskirts - Aero front lip - Lux V5's - Mid kick rear spoiler - Dark tint - Msport steering wheel with M3 paddles & trim
	Appreciate 0 Quote

10-11-2015, 12:08 AM	#129
PG Second Lieutenant 41 Rep 244 Posts Drives: 2008 135i Join Date: May 2015 Location: Sydney iTrader: (0)	Hey guys can any of you link me to a cable that you know works 100 percent. I got the ebay one that's linked here form Melbourne. It is recognised by the phone but not the app itself.
	Appreciate 0 Quote

10-31-2015, 09:48 PM	#132
Mayuri Krab The Cheap Arse Asian 48 Rep 585 Posts Drives: E90 335i & R33 Skyline GTS-T Join Date: Jun 2013 Location: Perth, Australia iTrader: (0)	Thinking of doing a mhd backed flash with my JB4, does the off the shelf maps they provide work fine? Only be using the pump gas (98 Ron equivalent one), no ethanol or anything fancy. Would there be error codes generated due to those maps being designed for us-spec cars?
	Appreciate 0 Quote