Would anyone be interested in an angel eye fade solution for e92?

O-cha · 04-03-2008, 08:05 PM

Quote:

Originally Posted by pdjafari

doo eeet or else i'll get some of the guys from the FI sub forum to come on here and bash you!!

Do it! The only guys that bash me are the ones who don't know anything about turbo cars.

nissan · 04-04-2008, 10:17 AM

Is the pin issue relevant in terms of the corner delete? There are a lot of ppl who don't bother w/the corner delete b/c of all the wiring alterations required. I know I'd pay a premium to just have an easier way of doing it. If you're willing to do a one-off, let me know..getting sick of the orange!

O-cha · 04-04-2008, 06:34 PM

Alright well I rigged something up just now as a DIY type thing. But it ended up throwing a code despite my earlier tests. I had to strip a little section of a few wires.

The code could probably be solved by either wiring the original angel eye wire to a resistor constantly or using a DTDP relay so it's only using the resistor during headlight use.

That's getting way to complicated though. I'm going to keep at it and try and get the exact dimensions of the pin today though and see if it can at last be found.

O-cha · 04-04-2008, 06:36 PM

Oh but it did look nice despite the code, I'll try and get some pics later tonight before I take it out.

dhan · 04-04-2008, 06:53 PM

sweet! can't wait.

GAM3OVR85 · 04-04-2008, 07:41 PM

Quote:

Originally Posted by O-cha

Oh but it did look nice despite the code, I'll try and get some pics later tonight before I take it out.

PICS!! o btw u can give it to me

, i got use to the error.

cgillio · 04-04-2008, 10:40 PM

Very Interested!!

O-cha · 04-05-2008, 02:17 AM

K I've come to the conclusion that they are just not bright enough. Even with the full 12v power they are very inconsistent. Maybe it's just the crappy gp 8500 bulbs. Might order a set of Mtech super whites or something and see.

BaLLzZz · 04-05-2008, 03:19 AM

where the pics

BMWdmk · 04-05-2008, 01:03 PM

diode?

GAM3OVR85 · 04-13-2008, 10:43 PM

update??

McLuVan · 04-17-2008, 01:52 AM

updateeeeeeee please

BMWdmk · 04-17-2008, 12:16 PM

i think he's over it

BLOODY ANGEL · 04-17-2008, 12:53 PM

BlueLion · 04-17-2008, 01:55 PM

his hands are prob stuck in the bulb housing

jcool10181 · 04-18-2008, 10:46 AM

Just DUU IT!!! Stop giving us the blue balls...

O-cha · 04-25-2008, 02:31 PM

Back looking for the pin, sent over specs for it.

If I do this an additional set of resistors will be required so were starting to get into a lot of money. And like I said I did not think the increase in brightness was as good as I had hoped. Part of the problem may have been I was looking at them at dusk and from right next to the car (instead of 10 feet in front)

Regardless I had a ton of requests for the corner delete setup which the gains are very obvious and apparent so I am back on track looking for the pins.

If I hunt down the pins I'll start making corner delete parts and redo the angel eye fix and take new pictures. I refuse to do it again without the pins though because it was such a ^$&% to strip some of the wires and get the new wires around them yada yada.

jcool10181 · 04-25-2008, 02:44 PM

O-Cha, Do you think there's a solution on having HID angel eyes? Any possibilities?

nissan · 04-25-2008, 11:30 PM

Someone on here had HID angel eyes and it didn't come out great. They were too bright and the light bled so it looked like a giant blob of light + the outer ring still didn't look great IIRC. I think another guy's running HID angels currently though (Sam Da Man)..not sure what his thoughts were.

O-cha · 05-01-2008, 04:37 AM

Alright guys I'm still waiting on pins

. I'm sorry this has turned into the biggest cock tease ever.

On a positive note I have found a way to do the corner delete with 0 cutting or splicing of any wires (and for the same reason no need to run a wire a few feet across the engine bay) but it adds an additional $5-$10. The angel eye mod of course was and remains 100% no cutting.

Let me know what you guys think about this and if it's worth the price or not.

When this is done I may only sell them as a set to keep costs down and make things easier on me. Please give me input if you feel strongly about only wanting one or the other.

jcool10181 · 05-01-2008, 10:28 AM

Quote:

Originally Posted by O-cha

Alright guys I'm still waiting on pins

. I'm sorry this has turned into the biggest cock tease ever.

On a positive note I have found a way to do the corner delete with 0 cutting or splicing of any wires (and for the same reason no need to run a wire a few feet across the engine bay) but it adds an additional $5-$10. The angel eye mod of course was and remains 100% no cutting.

Let me know what you guys think about this and if it's worth the price or not.

When this is done I may only sell them as a set to keep costs down and make things easier on me. Please give me input if you feel strongly about only wanting one or the other.

i have a 535i so i don't need the corner delete mod. can you sell them separately? also, do you have pics on the mtec bulbs?

jcool10181 · 05-01-2008, 10:29 AM

Quote:

Originally Posted by jcool10181

O-Cha, Do you think there's a solution on having HID angel eyes? Any possibilities?

do you have an answer for my question?

04-04-2008, 10:17 AM	#112
nissan Lieutenant 54 Rep 523 Posts Drives: 2015 M6 GC CP Join Date: Mar 2007 Location: DFW iTrader: (4)	Is the pin issue relevant in terms of the corner delete? There are a lot of ppl who don't bother w/the corner delete b/c of all the wiring alterations required. I know I'd pay a premium to just have an easier way of doing it. If you're willing to do a one-off, let me know..getting sick of the orange!
	Appreciate 0 Quote

04-04-2008, 06:34 PM	#113
O-cha Brigadier General 230 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	Alright well I rigged something up just now as a DIY type thing. But it ended up throwing a code despite my earlier tests. I had to strip a little section of a few wires. The code could probably be solved by either wiring the original angel eye wire to a resistor constantly or using a DTDP relay so it's only using the resistor during headlight use. That's getting way to complicated though. I'm going to keep at it and try and get the exact dimensions of the pin today though and see if it can at last be found. __________________
	Appreciate 0 Quote

04-04-2008, 06:36 PM	#114
O-cha Brigadier General 230 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	Oh but it did look nice despite the code, I'll try and get some pics later tonight before I take it out. __________________
	Appreciate 0 Quote

04-04-2008, 06:53 PM	#115
dhan Lieutenant 20 Rep 558 Posts Drives: '11 TiAg E92 335i Join Date: Feb 2008 Location: SoCal iTrader: (0)	sweet! can't wait.
	Appreciate 0 Quote

04-04-2008, 10:40 PM	#117
cgillio Lieutenant 20 Rep 539 Posts Drives: Car Join Date: Sep 2007 Location: Santa Barbara iTrader: (4) Garage List 2008 E92 335xi [0.00]	Very Interested!!
	Appreciate 0 Quote

04-05-2008, 02:17 AM	#118
O-cha Brigadier General 230 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	K I've come to the conclusion that they are just not bright enough. Even with the full 12v power they are very inconsistent. Maybe it's just the crappy gp 8500 bulbs. Might order a set of Mtech super whites or something and see. __________________
	Appreciate 0 Quote

04-05-2008, 03:19 AM	#119
BaLLzZz Colonel 128 Rep 2,298 Posts Drives: e92 335i Join Date: Aug 2007 Location: NYC iTrader: (5)	where the pics __________________ Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius and a lot of courage to move in the opposite direction. - Albert Einstein 01 e46 m54 - Current : 14 f10 n26 - Boring & Gone : 15 f30 n26 - Current : 08 e92 n54 - Gone & Missed!!!
	Appreciate 0 Quote

04-05-2008, 01:03 PM	#120
BMWdmk Rollin 3rd 107 Rep 1,233 Posts Drives: Something fast Join Date: Sep 2007 Location: Chino Hills iTrader: (15)	diode?
	Appreciate 0 Quote

04-13-2008, 10:43 PM	#121
GAM3OVR85 Major General 316 Rep 8,049 Posts Drives: E92 M3 Join Date: Aug 2007 Location: Montreal, QC iTrader: (18) Garage List 2008 BMW M3 [0.00] 2010 Sea-Doo RXT-X 260 [9.00] 2007 E92 328i [10.00]	update?? __________________ 08 E92 M3/Melbourne Red/6MT/Exec Pack/MDrive/EDC/PDC/19" 220M Mods: VRS Front Lip, HID Angels, KW V3, Stoptech BBK, SS lines, 18" TE37SL, Bastuck Exhaust, MS Air Filter, OEM Aluminum Padels, LED Interior Light 07 E92 328i/Jet Black/Cream Beige Leather/Premium/Step/Heated Seats...check garage!
	Appreciate 0 Quote

04-17-2008, 01:52 AM	#122
McLuVan Lieutenant General 312 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	updateeeeeeee please __________________
	Appreciate 0 Quote

04-17-2008, 12:16 PM	#123
BMWdmk Rollin 3rd 107 Rep 1,233 Posts Drives: Something fast Join Date: Sep 2007 Location: Chino Hills iTrader: (15)	i think he's over it
	Appreciate 0 Quote

04-17-2008, 12:53 PM	#124
BLOODY ANGEL Private 5 Rep 87 Posts Drives: 2008 E93 white/red Join Date: Mar 2008 Location: LA CALI iTrader: (0)
	Appreciate 0 Quote

04-17-2008, 01:55 PM	#125
BlueLion she likes the flavor...... 85 Rep 1,622 Posts Drives: A51-E92 Join Date: Nov 2006 Location: Bradenton - FL iTrader: (4) Garage List 2022 X3MC [0.00]	his hands are prob stuck in the bulb housing __________________ E92 Montego Blue silfa718 ..::STETT CAI\|ADVAN RS\|WAGNER FMIC\|MS DP\|VANGUARD\|PROCEDE\|FORGE DV\|BMS OCC\|KWV2\|MICHELIN PSS\|OOS::..
	Appreciate 0 Quote

04-18-2008, 10:46 AM	#126
jcool10181 Private 0 Rep 65 Posts Drives: Bimmer Join Date: Apr 2007 Location: Redondo Beach iTrader: (0)	Just DUU IT!!! Stop giving us the blue balls...
	Appreciate 0 Quote

04-25-2008, 02:31 PM	#127
O-cha Brigadier General 230 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	Back looking for the pin, sent over specs for it. If I do this an additional set of resistors will be required so were starting to get into a lot of money. And like I said I did not think the increase in brightness was as good as I had hoped. Part of the problem may have been I was looking at them at dusk and from right next to the car (instead of 10 feet in front) Regardless I had a ton of requests for the corner delete setup which the gains are very obvious and apparent so I am back on track looking for the pins. If I hunt down the pins I'll start making corner delete parts and redo the angel eye fix and take new pictures. I refuse to do it again without the pins though because it was such a ^$&% to strip some of the wires and get the new wires around them yada yada. __________________
	Appreciate 0 Quote

04-25-2008, 02:44 PM	#128
jcool10181 Private 0 Rep 65 Posts Drives: Bimmer Join Date: Apr 2007 Location: Redondo Beach iTrader: (0)	O-Cha, Do you think there's a solution on having HID angel eyes? Any possibilities?
	Appreciate 0 Quote

04-25-2008, 11:30 PM	#129
nissan Lieutenant 54 Rep 523 Posts Drives: 2015 M6 GC CP Join Date: Mar 2007 Location: DFW iTrader: (4)	Someone on here had HID angel eyes and it didn't come out great. They were too bright and the light bled so it looked like a giant blob of light + the outer ring still didn't look great IIRC. I think another guy's running HID angels currently though (Sam Da Man)..not sure what his thoughts were.
	Appreciate 0 Quote

05-01-2008, 04:37 AM	#130
O-cha Brigadier General 230 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	Alright guys I'm still waiting on pins . I'm sorry this has turned into the biggest cock tease ever. On a positive note I have found a way to do the corner delete with 0 cutting or splicing of any wires (and for the same reason no need to run a wire a few feet across the engine bay) but it adds an additional $5-$10. The angel eye mod of course was and remains 100% no cutting. Let me know what you guys think about this and if it's worth the price or not. When this is done I may only sell them as a set to keep costs down and make things easier on me. Please give me input if you feel strongly about only wanting one or the other. __________________
	Appreciate 0 Quote