***OFFICIAL Logic Motorsports HVI Intake System "E90Post Exclusive" Pricing - $325***

335hack · 03-24-2008, 05:22 PM

Thanks for you're help on Friday, great customer service.

Here are a few pictures of a heat shield that I fabricated this past weekend. So far I’ve noticed a 20 degree temperature drop from the filter.

ezatnova · 03-24-2008, 05:36 PM

Cool! (no pun intended)

How are you measuring temps? What are your experiences with temps as the car sits in traffic or idles, if you have any yet. Any info on how you made your heat shield? I assume you made sure a) it does come up high enough to hit the under-hood insulation, or it will shred it up with vibration, and b) it doesn't scrape/rattle around against the frame and make annoying noise or remove paint.

335hack · 03-24-2008, 05:46 PM

I’ve measured the temperature of the filter with a heat gun, before and after the shield. The heat shield was made of aluminum, however I plan on fabricating one out of ABS plastic in the near future. There’s no issues the with the shield hitting , scraping or vibrating against the hood.

cn555ic · 03-24-2008, 06:08 PM

great job on the heatshield...I think you should get some insulation to cover up the edges on top to make a nice tight seal with the hood when its closed!!! Nice to see DIY

raceyBMW · 03-24-2008, 06:55 PM

Awesome. Now do the modified intake snorkel and have it outlet into the intake heat shielded area...slap a piece of weatherstripping on the top of the heatshield, and it will be perfect.

edit: and also add the DIY scoops to the intake snorkel.

That's what I plan on doing next....

xquisit · 03-24-2008, 06:58 PM

Damn, I didn't see it was for 335s.. Guess I should go do some more searching

335hack · 03-24-2008, 07:23 PM

I already have the dimensions marked on my template for the snorkel, however I have to purchase a replacement before I can do this. Since mine has a crack

raceyBMW · 03-24-2008, 07:24 PM

Definitely update us with some pics when you get this done.

Max@Logic · 03-24-2008, 11:19 PM

Update: All Pms replied!

Great stuff James!! Where did you bolt the shield to?

Best Regards,
Max-

Max@Logic · 03-25-2008, 02:03 AM

TTT

Lshaw · 03-25-2008, 04:08 PM

got my intake installed! It sounds Great! I love the Whoooosh.

How much of a difference would it make if i were to do the Brake Duct mod and the modified snorkel

Amir87 · 03-25-2008, 04:13 PM

Here is a pic to compare stock snorkel and modified snorkel.

ezatnova · 03-25-2008, 04:23 PM

On another Logic thread, there are diagram pics of the 328's snorkel. Direct bolt in replacement and the little snorkely thing is already pointed the right way! I think Tischer or somewhere else has them for $46 or so. We should see if we can do a bulk order of these things...either the regular snorkel to hack, or the 328's to just use as-is.

raceyBMW · 03-25-2008, 05:18 PM

+1 I would be up for doing a group buy of the 328 snorkel for sure.

If you are a little mechanically inclined, the brake duct mod isn't too terribly bad. But you do need to partially remove the fender lining and bumper so you can get into there to remove and modify the brake duct. I haven't seen any data for temps in the HVI area with/without the brake duct modified, but just logic (haha, get it?) would tell me that more air would be getting up into the engine bay.

Max@Logic · 03-25-2008, 07:18 PM

Glad to see things are going well for everyone!

Amir87 · 03-25-2008, 08:28 PM

I would like to add, I have had the intake almost a week now.
Every time I get home and pop the hood and touch the intake tubing.
It's just warm, not uncomfortable warm. The aluminum is doing really well with mininum heatsoak.

This is after various styles of driving from spirited runs to highway cruising.

You will not be disappointed with the Logic HVI

Max@Logic · 03-25-2008, 08:50 PM

Quote:

Originally Posted by Amir87

I would like to add, I have had the intake almost a week now.
Every time I get home and pop the hood and touch the intake tubing.
It's just warm, not uncomfortable warm. The aluminum is doing really well with mininum heatsoak.

This is after various styles of driving from spirited runs to highway cruising.

You will not be disappointed with the Logic HVI

03-26-2008, 05:31 AM

bump

Max@Logic · 03-26-2008, 02:43 PM

ttt

Amir87 · 03-26-2008, 08:40 PM

doku · 03-26-2008, 10:13 PM

Quote:

Originally Posted by ezatnova

On another Logic thread, there are diagram pics of the 328's snorkel. Direct bolt in replacement and the little snorkely thing is already pointed the right way! I think Tischer or somewhere else has them for $46 or so. We should see if we can do a bulk order of these things...either the regular snorkel to hack, or the 328's to just use as-is.

Yeah I put this in another thread. Here's the link
http://www.e90post.com/forums/showth...13#post2341413

I have everything on order. When I install it, I'll post on it. I wonder if we can modify that heat shield to use the 328 snorkel....

Max@Logic · 03-27-2008, 02:26 PM

Update: The latest shipments went out yesterday and everyone should have tracking numbers by now. Give us a call or Pm if you did not receive one.

All pm's have been replied.

Best Regards,
Max-

03-24-2008, 05:22 PM	#111
335hack *** 14 Rep 202 Posts Drives: 2016 BMW M3 Join Date: Mar 2007 Location: Southern, CA iTrader: (4)	Thanks for you're help on Friday, great customer service. Here are a few pictures of a heat shield that I fabricated this past weekend. So far I’ve noticed a 20 degree temperature drop from the filter. Attached Images Last edited by 335hack; 03-24-2008 at 07:37 PM..
	Appreciate 0

03-24-2008, 05:36 PM	#112
ezatnova Power and Speed 106 Rep 2,200 Posts Drives: ‘22 Shelby GT500, ‘25 X5 50e, '21 Tacoma TRD OR Join Date: Jan 2006 Location: West Chester, PA iTrader: (5)	Cool! (no pun intended) How are you measuring temps? What are your experiences with temps as the car sits in traffic or idles, if you have any yet. Any info on how you made your heat shield? I assume you made sure a) it does come up high enough to hit the under-hood insulation, or it will shred it up with vibration, and b) it doesn't scrape/rattle around against the frame and make annoying noise or remove paint.
	Appreciate 0

03-24-2008, 05:46 PM	#113
335hack *** 14 Rep 202 Posts Drives: 2016 BMW M3 Join Date: Mar 2007 Location: Southern, CA iTrader: (4)	I’ve measured the temperature of the filter with a heat gun, before and after the shield. The heat shield was made of aluminum, however I plan on fabricating one out of ABS plastic in the near future. There’s no issues the with the shield hitting , scraping or vibrating against the hood. Last edited by 335hack; 03-24-2008 at 07:36 PM..
	Appreciate 0

03-24-2008, 06:08 PM	#114
cn555ic 485 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	great job on the heatshield...I think you should get some insulation to cover up the edges on top to make a nice tight seal with the hood when its closed!!! Nice to see DIY
	Appreciate 0

03-24-2008, 06:55 PM	#115
raceyBMW king of the hills 114 Rep 2,923 Posts Drives: 2011 M3 w/ESS55, 2001 540i/6 Join Date: Dec 2006 Location: Arvada, CO iTrader: (1) Garage List 2001 BMW 540i/6 [8.17] 1994 530i [9.00] 2007 335i Coupe [8.37]	Awesome. Now do the modified intake snorkel and have it outlet into the intake heat shielded area...slap a piece of weatherstripping on the top of the heatshield, and it will be perfect. edit: and also add the DIY scoops to the intake snorkel. That's what I plan on doing next....
	Appreciate 0

03-24-2008, 06:58 PM	#116
xquisit «-·¨¯¯¨·-» 117 Rep 1,716 Posts Drives: 328i / R32 / 1.8T Join Date: Mar 2008 Location: Los Angeles iTrader: (4)	Damn, I didn't see it was for 335s.. Guess I should go do some more searching __________________ [N51]BMW Perf. Grilles - Debadge - AA exhaust - OEM M Sport front bumper {Euro Style: Reflectors shaved off} - Medium tint - Custom Headlights - BBS LM Reps 19x8 ET32 19x10 ET30 [LCI]
	Appreciate 0

03-24-2008, 07:23 PM	#117
335hack *** 14 Rep 202 Posts Drives: 2016 BMW M3 Join Date: Mar 2007 Location: Southern, CA iTrader: (4)	I already have the dimensions marked on my template for the snorkel, however I have to purchase a replacement before I can do this. Since mine has a crack
	Appreciate 0

03-24-2008, 07:24 PM	#118
raceyBMW king of the hills 114 Rep 2,923 Posts Drives: 2011 M3 w/ESS55, 2001 540i/6 Join Date: Dec 2006 Location: Arvada, CO iTrader: (1) Garage List 2001 BMW 540i/6 [8.17] 1994 530i [9.00] 2007 335i Coupe [8.37]	Definitely update us with some pics when you get this done.
	Appreciate 0

03-24-2008, 11:19 PM	#119
Max@Logic 7 Rep 426 Posts Drives: E55 AMG Join Date: Oct 2007 Location: Irvine iTrader: (3)	Update: All Pms replied! Great stuff James!! Where did you bolt the shield to? Best Regards, Max- __________________ Stock Mercedes Benz E55 AMG. 11.96@118.3mph Last edited by Max@Logic; 03-25-2008 at 12:09 PM..
	Appreciate 0

03-25-2008, 02:03 AM	#120
Max@Logic 7 Rep 426 Posts Drives: E55 AMG Join Date: Oct 2007 Location: Irvine iTrader: (3)	TTT __________________ Stock Mercedes Benz E55 AMG. 11.96@118.3mph
	Appreciate 0

03-25-2008, 04:08 PM	#121
Lshaw Lieutenant Colonel 255 Rep 1,873 Posts Drives: 09 335i 6mt Join Date: Oct 2007 Location: NYC/Pittsburgh iTrader: (21)	got my intake installed! It sounds Great! I love the Whoooosh. How much of a difference would it make if i were to do the Brake Duct mod and the modified snorkel
	Appreciate 0

03-25-2008, 04:13 PM	#122
Amir87 Gruppe Titan 288 Rep 2,839 Posts Drives: 08 E92 SG/Coral Join Date: Sep 2007 Location: NC iTrader: (37) Garage List 2008 E92 335i [10.00]	Here is a pic to compare stock snorkel and modified snorkel. Attached Images __________________
	Appreciate 0

03-25-2008, 04:23 PM	#123
ezatnova Power and Speed 106 Rep 2,200 Posts Drives: ‘22 Shelby GT500, ‘25 X5 50e, '21 Tacoma TRD OR Join Date: Jan 2006 Location: West Chester, PA iTrader: (5)	On another Logic thread, there are diagram pics of the 328's snorkel. Direct bolt in replacement and the little snorkely thing is already pointed the right way! I think Tischer or somewhere else has them for $46 or so. We should see if we can do a bulk order of these things...either the regular snorkel to hack, or the 328's to just use as-is.
	Appreciate 0

03-25-2008, 05:18 PM	#124
raceyBMW king of the hills 114 Rep 2,923 Posts Drives: 2011 M3 w/ESS55, 2001 540i/6 Join Date: Dec 2006 Location: Arvada, CO iTrader: (1) Garage List 2001 BMW 540i/6 [8.17] 1994 530i [9.00] 2007 335i Coupe [8.37]	+1 I would be up for doing a group buy of the 328 snorkel for sure. If you are a little mechanically inclined, the brake duct mod isn't too terribly bad. But you do need to partially remove the fender lining and bumper so you can get into there to remove and modify the brake duct. I haven't seen any data for temps in the HVI area with/without the brake duct modified, but just logic (haha, get it?) would tell me that more air would be getting up into the engine bay.
	Appreciate 0

03-25-2008, 07:18 PM	#125
Max@Logic 7 Rep 426 Posts Drives: E55 AMG Join Date: Oct 2007 Location: Irvine iTrader: (3)	Glad to see things are going well for everyone! __________________ Stock Mercedes Benz E55 AMG. 11.96@118.3mph
	Appreciate 0

03-25-2008, 08:28 PM	#126
Amir87 Gruppe Titan 288 Rep 2,839 Posts Drives: 08 E92 SG/Coral Join Date: Sep 2007 Location: NC iTrader: (37) Garage List 2008 E92 335i [10.00]	I would like to add, I have had the intake almost a week now. Every time I get home and pop the hood and touch the intake tubing. It's just warm, not uncomfortable warm. The aluminum is doing really well with mininum heatsoak. This is after various styles of driving from spirited runs to highway cruising. You will not be disappointed with the Logic HVI __________________
	Appreciate 0

03-26-2008, 05:31 AM	#128
nico335 Guest 0 Rep n/a Posts Drives:	bump
	Appreciate 0

03-26-2008, 02:43 PM	#129
Max@Logic 7 Rep 426 Posts Drives: E55 AMG Join Date: Oct 2007 Location: Irvine iTrader: (3)	ttt __________________ Stock Mercedes Benz E55 AMG. 11.96@118.3mph
	Appreciate 0

03-26-2008, 08:40 PM	#130
Amir87 Gruppe Titan 288 Rep 2,839 Posts Drives: 08 E92 SG/Coral Join Date: Sep 2007 Location: NC iTrader: (37) Garage List 2008 E92 335i [10.00]	__________________
	Appreciate 0

03-27-2008, 02:26 PM	#132
Max@Logic 7 Rep 426 Posts Drives: E55 AMG Join Date: Oct 2007 Location: Irvine iTrader: (3)	Update: The latest shipments went out yesterday and everyone should have tracking numbers by now. Give us a call or Pm if you did not receive one. All pm's have been replied. Best Regards, Max- __________________ Stock Mercedes Benz E55 AMG. 11.96@118.3mph
	Appreciate 0