Vishnu Multi-Gauge System

Lane · 12-02-2008, 12:27 PM

Can we change the maps with this gauge?

mike281 · 12-16-2008, 11:11 PM

I'm assuming everything is all done and shipped since I was billed today!? Can't wait to get it looks great.

OpenFlash · 12-17-2008, 12:47 AM

Quote:

Originally Posted by mike281

I'm assuming everything is all done and shipped since I was billed today!? Can't wait to get it looks great.

Close

Just packing things up over the next few days. Should ship out this week... finally. That mounting hardware took forever to manufacture!

Shiv

maui86 · 12-17-2008, 04:39 AM

shiv, you have a PM

teri

mike281 · 12-25-2008, 11:09 PM

any new news on these?

OpenFlash · 12-25-2008, 11:38 PM

Quote:

Originally Posted by mike281

any new news on these?

Sure do. They are packed and ready to go out on Monday. Had a snafu with respect to the custom programming. The original batch didn't communicate with the vac/boost module. All fixed now courtesy of Mike at PLX

Again, sorry for the delay!

Shiv

hollandjean · 12-25-2008, 11:42 PM

Wow Nice job, Shiv.

mike281 · 12-26-2008, 12:06 AM

Quote:

Originally Posted by shiv@vishnu

Sure do. They are packed and ready to go out on Monday. Had a snafu with respect to the custom programming. The original batch didn't communicate with the vac/boost module. All fixed now courtesy of Mike at PLX

Again, sorry for the delay!

Shiv

thanks for the update. Sounds like you have been still working hard through the hollidays. Thank u and I hope u had a good holliday. I would rather wait extra time and have a good product, which I know I will get from you. So the delay is fine with me. Better to fix it before I get it haha. can't wait for the gauge and DCI I ordered from u too.

sflgator · 12-26-2008, 09:27 AM

Quote:

Originally Posted by shiv@vishnu

Sure do. They are packed and ready to go out on Monday. Had a snafu with respect to the custom programming. The original batch didn't communicate with the vac/boost module. All fixed now courtesy of Mike at PLX

Again, sorry for the delay!

Shiv

Looking forward to trying out the new gauge system!

BlueLion · 01-07-2009, 09:49 AM

when are these shipping?

Vince@ V K Motorwerks · 01-07-2009, 10:40 AM

+1 cant wait to get mine

mike281 · 01-07-2009, 11:16 AM

+1000000000000

sflgator · 01-19-2009, 08:22 PM

Received my Vishnu multi-gauge, but haven't installed it yet; a couple questions...

1. Are there any special things I need to know if installing with the PROcede v3.1 Rev I?

2. Anyone else receive and install this Vishnu multi-gauge yet...any initial thoughts/reviews?

OpenFlash · 01-19-2009, 09:30 PM

Quote:

Originally Posted by sflgator

Received my Vishnu multi-gauge, but haven't installed it yet; a couple questions...

1. Are there any special things I need to know if installing with the PROcede v3.1 Rev I?

2. Anyone else receive and install this Vishnu multi-gauge yet...any initial thoughts/reviews?

All the install/set-up instructions can be found here:
http://216.120.252.228/forum/showthread.php?t=991

Other than that, just ask. You don't need to do anything special other than tap into power and ground (from sig lighter), plug in the OBD-II plug, plumb the vacuum/boost line through the firware and mount the modules under steering column. Pics and more info posted in the link above

Shiv

sflgator · 01-19-2009, 10:43 PM

Quote:

Originally Posted by shiv@vishnu

All the install/set-up instructions can be found here:
http://216.120.252.228/forum/showthread.php?t=991

Other than that, just ask. You don't need to do anything special other than tap into power and ground (from sig lighter), plug in the OBD-II plug, plumb the vacuum/boost line through the firware and mount the modules under steering column. Pics and more info posted in the link above

Shiv

Cool. Thanks.

mike281 · 01-20-2009, 12:17 AM

shiv, when is mine shipping? I was charged a looooong time ago and I got a tracking number awhile ago too that shows it still hasn't been shipped. I sent you a pm but u still haven't got back to me yet. An update would be much appreciated thank you.

OpenFlash · 01-20-2009, 12:19 AM

Quote:

Originally Posted by mike281

shiv, when is mine shipping? I was charged a looooong time ago and I got a tracking number awhile ago too that shows it still hasn't been shipped. I sent you a pm but u still haven't got back to me yet. An update would be much appreciated thank you.

I'm pretty sure everything has shipped a while back. Could you PM ali@vishnu and ask for an update? He should be able to look it up and see what is going on. I'm just the R&D guy

Shiv

mike281 · 01-20-2009, 12:35 AM

Thanks Shiv. I sent him a PM. Will you let him know so he can get back to me as soon as possible. I'm really anxious to get this and honestly getting kind of nervous now that you said you think everything has been shipped out a while back and the tracking number I got still shows nothing.

BlueLion · 01-20-2009, 09:31 AM

I installed one over the weekend and it was a breeze. This was the first boost gauge or any gauge of any type I installed. Just take your time, the hardest thing is getting all the wires neat and tucked away. No more than and hours work max.

I'm just curious about how to get more readings of the OBD parameters.

GeorgeSmooth · 01-20-2009, 04:28 PM

Sounds like a great product. Not sure if this was covered but can it read boost in BAR . Are there plans in the future for Air fuel ratio display or can it read it, in that little pic you posted it shows 14.7 with what looks like AFR below. Can you maybe please post a bigger pic of it. Thanks.

Vince@ V K Motorwerks · 01-20-2009, 06:24 PM

I installed my in about 45 minutes. It is great, I love the way that you can show Vac and boost on the same screen and also see your peak levels. I also love the white boost gauge that reads 0-30psi. You can see what boost you are running with your peripheral vision just by looking at what color is on the screen. I recommend this to anyone with a tune.

**335i** · 01-21-2009, 03:26 AM

is this gauge is possible to get in PSI mode or in BARS also?

12-02-2008, 12:27 PM	#111
Lane Several N54 cars, V1,3, V2.0.2, and V3.1 12 Rep 778 Posts Drives: N54s Join Date: Nov 2007 Location: UK DE GR SW iTrader: (0)	Can we change the maps with this gauge?
	Appreciate 0 Quote

12-16-2008, 11:11 PM	#112
mike281 Private 1 Rep 51 Posts Drives: 2007 335i coupe Join Date: Apr 2008 Location: Boston, MA iTrader: (0)	I'm assuming everything is all done and shipped since I was billed today!? Can't wait to get it looks great.
	Appreciate 0 Quote

12-17-2008, 04:39 AM	#114
maui86 Captain 39 Rep 738 Posts Drives: 07 335i Join Date: Nov 2007 Location: paradise iTrader: (1)	shiv, you have a PM teri __________________ http://videos.streetfire.net/video/s...rays_37268.htm gotta do what i gotta do to get them donuts 04 spec-v: rip dec07
	Appreciate 0 Quote

12-25-2008, 11:09 PM	#115
mike281 Private 1 Rep 51 Posts Drives: 2007 335i coupe Join Date: Apr 2008 Location: Boston, MA iTrader: (0)	any new news on these?
	Appreciate 0 Quote

12-25-2008, 11:42 PM	#117
hollandjean JD/MBA 15 Rep 164 Posts Drives: 2011 E71 2015 F36 Join Date: Dec 2008 Location: Drexel iTrader: (4)	Wow Nice job, Shiv.
	Appreciate 0 Quote

01-07-2009, 09:49 AM	#120
BlueLion Lieutenant Colonel 98 Rep 1,638 Posts Drives: 22 X3M SPY Join Date: Nov 2006 Location: Bradenton - FL iTrader: (4) Garage List 2022 X3MC [0.00]	when are these shipping? __________________ Retired: '07 E92 335 MB, '16 M5COMP SG Current: '22 X3MCOMP SPY
	Appreciate 0 Quote

01-07-2009, 10:40 AM	#121
Vince@ V K Motorwerks Lieutenant Colonel 159 Rep 1,738 Posts Drives: 01 Black 911 Turbo, 09 X5 Join Date: May 2007 Location: Bloomingdale, IL iTrader: (0)	+1 cant wait to get mine
	Appreciate 0 Quote

01-07-2009, 11:16 AM	#122
mike281 Private 1 Rep 51 Posts Drives: 2007 335i coupe Join Date: Apr 2008 Location: Boston, MA iTrader: (0)	+1000000000000
	Appreciate 0 Quote

01-19-2009, 08:22 PM	#123
sflgator Major General 166 Rep 5,389 Posts Drives: '09 MB C63 AMG & '08 MB GL450 Join Date: Oct 2006 Location: U.S. iTrader: (1)	Received my Vishnu multi-gauge, but haven't installed it yet; a couple questions... 1. Are there any special things I need to know if installing with the PROcede v3.1 Rev I? 2. Anyone else receive and install this Vishnu multi-gauge yet...any initial thoughts/reviews? __________________ \|2009 RENNtech MB C63 AMG \| Black/Black Leather/Black Maple \| Premium II \| MultiMedia \| iPod \| \| TeleAid \| Charcoal Filter Delete \| BMC High-Flow Air Filters \| High-Flow Secondary Cats \| Clear Side Markers \|
	Appreciate 0 Quote

01-20-2009, 12:17 AM	#126
mike281 Private 1 Rep 51 Posts Drives: 2007 335i coupe Join Date: Apr 2008 Location: Boston, MA iTrader: (0)	shiv, when is mine shipping? I was charged a looooong time ago and I got a tracking number awhile ago too that shows it still hasn't been shipped. I sent you a pm but u still haven't got back to me yet. An update would be much appreciated thank you.
	Appreciate 0 Quote

01-20-2009, 12:35 AM	#128
mike281 Private 1 Rep 51 Posts Drives: 2007 335i coupe Join Date: Apr 2008 Location: Boston, MA iTrader: (0)	Thanks Shiv. I sent him a PM. Will you let him know so he can get back to me as soon as possible. I'm really anxious to get this and honestly getting kind of nervous now that you said you think everything has been shipped out a while back and the tracking number I got still shows nothing. Last edited by mike281; 01-20-2009 at 12:51 AM..
	Appreciate 0 Quote

01-20-2009, 09:31 AM	#129
BlueLion Lieutenant Colonel 98 Rep 1,638 Posts Drives: 22 X3M SPY Join Date: Nov 2006 Location: Bradenton - FL iTrader: (4) Garage List 2022 X3MC [0.00]	I installed one over the weekend and it was a breeze. This was the first boost gauge or any gauge of any type I installed. Just take your time, the hardest thing is getting all the wires neat and tucked away. No more than and hours work max. I'm just curious about how to get more readings of the OBD parameters. __________________ Retired: '07 E92 335 MB, '16 M5COMP SG Current: '22 X3MCOMP SPY Last edited by BlueLion; 01-20-2009 at 09:51 AM..
	Appreciate 0 Quote

01-20-2009, 04:28 PM	#130
GeorgeSmooth Lieutenant 41 Rep 565 Posts Drives: 2008 E90 335i AT Join Date: Feb 2008 Location: South Africa iTrader: (0)	Sounds like a great product. Not sure if this was covered but can it read boost in BAR . Are there plans in the future for Air fuel ratio display or can it read it, in that little pic you posted it shows 14.7 with what looks like AFR below. Can you maybe please post a bigger pic of it. Thanks.
	Appreciate 0 Quote

01-20-2009, 06:24 PM	#131
Vince@ V K Motorwerks Lieutenant Colonel 159 Rep 1,738 Posts Drives: 01 Black 911 Turbo, 09 X5 Join Date: May 2007 Location: Bloomingdale, IL iTrader: (0)	I installed my in about 45 minutes. It is great, I love the way that you can show Vac and boost on the same screen and also see your peak levels. I also love the white boost gauge that reads 0-30psi. You can see what boost you are running with your peripheral vision just by looking at what color is on the screen. I recommend this to anyone with a tune.
	Appreciate 0 Quote

01-21-2009, 03:26 AM	#132
335i Colonel 191 Rep 2,320 Posts Drives: TOYOTA & 2008 E92 335i 6MT Join Date: Jul 2007 Location: Swiss iTrader: (4) Garage List 2008 335i [9.00]	is this gauge is possible to get in PSI mode or in BARS also? __________________ E92 335i Black Saphire 6MT PROcede V5, BMS DCI, Big Tom IC, AR CL-DP's 3", AR Design OC, Forge DV's, OEM M3 side skirts, BMW Performance Wheels 19 inch 269 Black Gloss+Continental ContiSportContact 5P (400hp and 550nm) https://www.youtube.com/user/aistis7..._as=subscriber
	Appreciate 0 Quote