Procede 6-14 beta map - MUCH better than 5-10 Beta

OpenFlash · 07-01-2011, 10:59 AM

Quote:

Originally Posted by c4s335i

I've tested these maps in 100F track temps without throwing a single code on 93 pump gas. Power is amazing, especially in part throttle conditions. You really have to be careful with gear selection and feathering the throttle coming out of turns, or you'll easily get way too much power too quickly. I found myself leaving it in 3rd for some of the slower turns just to help keep power/torque in check. The best part is that the car felt consistent for the entire session. It never felt like it was losing power as the session ran on, and these were 30 minute sessions.

Wait until you try running a track day with a PWM meth kit

jpsimon · 07-01-2011, 11:03 AM

Just confirming what others have said, 6-14 are solid and awesome and super duper

Jeff@TopGearSolutions · 07-01-2011, 11:05 AM

Ya it actually is a sold map. I'm using them.

rooster3.0 · 07-01-2011, 02:26 PM

These maps seem great so far. I had to reprogram my foot a little bit.

CSL335i · 07-01-2011, 02:32 PM

I upgraded my Procede to rev2a 6-14 DCT and related firmware today.
I have n54 e92 335i with DCT, stockish turbo, Okada coils, custom everything.
Little bit confused about 6-14 as i have some slight power drop-out drop-in issues during partial throttle (maybe procede tries different ignition???) - will test after 10pm on WOT as well and will send e-mail directly to Shiv.

This is not the first time, when maps for n54 DCT has some issues.

Recently i used 03-30 DIC GAS X BETA 400 0DEG from Shiv, which was so far the best map for my DCT ever. Except two issues: 1, sometime boost solenoid farting noise reappeared on idle, and 2, during WOT on MAP 1 with 11psi i consequently hade limp mode and 29F2 HPFP error code (never had any HPFP error on any other map, even with 16psi, only had 2 times in the past three months during cold startup..., so i dont know, wheather my HPFP is on his way out. My car was produced in april of 2009 and has 55k km)

Anybody with 6-14 map and n54 DCT?

Laszlo

OpenFlash · 07-01-2011, 02:36 PM

Quote:

Originally Posted by CSL335i

I upgraded my Procede to rev2a 6-14 DCT and related firmware today.
I have n54 e92 335i with DCT, stockish turbo, Okada coils, custom everything.
Little bit confused about 6-14 as i have some slight power drop-out drop-in issues during partial throttle (maybe procede tries different ignition???) - will test after 10pm on WOT as well and will send e-mail directly to Shiv.

This is not the first time, when maps for n54 DCT has some issues.

Recently i used 03-30 DIC GAS X BETA 400 0DEG from Shiv, which was so far the best map for my DCT ever. Except two issues: 1, sometime boost solenoid farting noise reappeared on idle, and 2, during WOT on MAP 1 with 11psi i consequently hade limp mode and 29F2 HPFP error code (never had any HPFP error on any other map, even with 16psi, only had 2 times in the past three months during cold startup..., so i dont know, wheather my HPFP is on his way out. My car was produced in april of 2009 and has 55k km)

Anybody with 6-14 map and n54 DCT?

Laszlo

If you are getting HPFP codes, then it's likely you have a faulty HPFP. There's really nothing the map itself can to do trigger that code. It would likely explain your power drop outs. There is nothing new that the Procede is doing with respect to timing.

Lastly, please read the Read me file. It clearly states to email all issues to me directly.

ridin135 · 07-01-2011, 02:41 PM

How do these feel compared to the 12-17 maps. Trying to figure out if I wanna run these new ones or stick with the auto tunning for meth on the 12-17.

jpsimon · 07-01-2011, 02:42 PM

everyones ass-dyno is calibrated VERY different... 99% of the time people are experiencing things completely in their mind. Just run the map yourself and see how you like it.

rgpwr · 07-01-2011, 03:14 PM

Loving these maps. Best ones I've felt.

SSIMPS · 07-01-2011, 03:44 PM

just another happy vishnu customer here

335iLI · 07-01-2011, 10:42 PM

6-14 maps are great shiv ESP coming from 3-30. No more bog on shifts on my 6mt. My big problem is keeping my computer connected while updating. I bought the cable from radio shack(2nd cable) and it still disconnects. I put the computer in xp mode and did the performance mode and nothing. I keep having to bug my friends for the use of their xp laptops. Any suggestions. It was nice talking to you today on the phone. The meth kit is 90 percent done just need to get those connectors. Everything went smooth. First time takes the longest and it will be a breeze the next.

akotten · 07-01-2011, 10:54 PM

I hope I can get these maps soon!

I'm looking to dyno my car soon and these sound like the way to go.

335iLI · 07-01-2011, 10:58 PM

Quote:

Originally Posted by akotten

I hope I can get these maps soon!

I'm looking to dyno my car soon and these sound like the way to go.

They are posted on the website

akotten · 07-01-2011, 11:15 PM

Doh! I can't believe I missed that. Downloading now!

(Thank You)

3coupe · 07-02-2011, 04:59 AM

can anyone point me to where to reset adaptation procedures when you load a new firmware?

**335i** · 07-02-2011, 08:26 AM

Quote:

Originally Posted by 3coupe

can anyone point me to where to reset adaptation procedures when you load a new firmware?

if u have cruise stalk button http://www.e90post.com/forums/showpo...9&postcount=10

pits200 · 07-02-2011, 08:47 AM

Anyone else still get low boost codes under very light throttle? I'm still getting that problem but the check engine light goes away after about 30 seconds. My car runs great so I don't think I have an actual problem with the car.

enrita · 07-02-2011, 08:49 AM

Never got any on all beta maps

Glowin · 07-03-2011, 12:00 AM

Quote:

Originally Posted by Papajim

From the text:

6-1 v5 Beta maps with 106_4 Firmware

And after a few lines...:
-You must use the attached firmware with these new maps (pro5v104_2.bin).

And then:

-As with previous beta DIC maps, Autotuning and Procede traction/launch control are current disabled for the time being.

And after a few lines:

-Enabled Procede Traction Control. You can adjust the sensitivity by the Traction Threshold user adjustable. 100% turn it off. Lower values turn it on and make it more sensitive. I suggest running 30-40% which allows for some small bit of wheelspin before intervening and dropping boost.

The first is a copy/paste mistake wich is 2-3 times repeated (thats why readme first should never be copy pasted) what about the second?

Shiv, can you pls. fix the read me and let us know?

OpenFlash · 07-03-2011, 12:28 AM

Quote:

Originally Posted by Glowin

Shiv, can you pls. fix the read me and let us know?

I fixed that yesterday. Reload the read me.

Big Tom · 07-03-2011, 05:44 AM

Quote:

Originally Posted by TT3 iN NyC

What is it? Spill the beans!!!

Since many of us are suffering from WG-rattle before the PROcede is waking up due to the cold oil temp, I asked Shiv to activate the Rattle Fix right from the beginning.

Right now it's very embarrassing when the car rattles like crazy and sounds like an old Volvo the first 10 minutes.

The Rattle Fix works like a charm, so why not have the opportunity to use it all the time?

CSL335i · 07-03-2011, 10:31 AM

As I have "power drop-in/out" on partial throttle at map1 6-14 DIC DCT while my speed and my foot on the gas pedal remain the same level, I went back to 3-30 DIC GAS X BETA 400 0DEG DCT map1 and the car feels brilliant on partial throttle (as well) with the same conditions. No "power drop-in/out", so i dont think the problem is related to my otherwise getting faulty HPFP. I can reproduce this anytime.

Come on DCT guys, please try the 6-14 DIC maps to collect essential experiences.

On the other hand, i downloaded User Software version 5.1. What are the differences between version 5.0 and 5.1? Anybody knows it?

07-01-2011, 11:03 AM	#112
jpsimon Team Zissou 3154 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	Just confirming what others have said, 6-14 are solid and awesome and super duper
	Appreciate 0 Quote

07-01-2011, 11:05 AM	#113
Jeff@TopGearSolutions 3474 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Ya it actually is a sold map. I'm using them.
	Appreciate 0 Quote

07-01-2011, 02:26 PM	#114
rooster3.0 Major 27 Rep 1,306 Posts Drives: E92 335i Join Date: Nov 2006 Location: Jersey iTrader: (4)	These maps seem great so far. I had to reprogram my foot a little bit. __________________ Train with your head; not above it.
	Appreciate 0 Quote

07-01-2011, 02:32 PM	#115
CSL335i Lieutenant 212 Rep 419 Posts Drives: M2 and... Join Date: Mar 2010 Location: Budapest/Hungary/Europe iTrader: (0)	I upgraded my Procede to rev2a 6-14 DCT and related firmware today. I have n54 e92 335i with DCT, stockish turbo, Okada coils, custom everything. Little bit confused about 6-14 as i have some slight power drop-out drop-in issues during partial throttle (maybe procede tries different ignition???) - will test after 10pm on WOT as well and will send e-mail directly to Shiv. This is not the first time, when maps for n54 DCT has some issues. Recently i used 03-30 DIC GAS X BETA 400 0DEG from Shiv, which was so far the best map for my DCT ever. Except two issues: 1, sometime boost solenoid farting noise reappeared on idle, and 2, during WOT on MAP 1 with 11psi i consequently hade limp mode and 29F2 HPFP error code (never had any HPFP error on any other map, even with 16psi, only had 2 times in the past three months during cold startup..., so i dont know, wheather my HPFP is on his way out. My car was produced in april of 2009 and has 55k km) Anybody with 6-14 map and n54 DCT? Laszlo
	Appreciate 0 Quote

07-01-2011, 02:41 PM	#117
ridin135 Colonel 134 Rep 2,407 Posts Drives: Depends on the day Join Date: Dec 2008 Location: Greenville iTrader: (7)	How do these feel compared to the 12-17 maps. Trying to figure out if I wanna run these new ones or stick with the auto tunning for meth on the 12-17.
	Appreciate 0 Quote

07-01-2011, 02:42 PM	#118
jpsimon Team Zissou 3154 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	everyones ass-dyno is calibrated VERY different... 99% of the time people are experiencing things completely in their mind. Just run the map yourself and see how you like it.
	Appreciate 0 Quote

07-01-2011, 03:14 PM	#119
rgpwr Second Lieutenant 6 Rep 294 Posts Drives: 08.M6 Join Date: Sep 2009 Location: Ft. Lauderdale iTrader: (0)	Loving these maps. Best ones I've felt. __________________ [ 09.e92.335i.a52 / procede.v5 / ets.fmic / afe.intake / eibach.pro / avantgarde.m310 / dimisa.4 / cityvision.ae ]
	Appreciate 0 Quote

07-01-2011, 03:44 PM	#120
SSIMPS Lieutenant 148 Rep 583 Posts Drives: 2025 X5 50e Join Date: Dec 2008 Location: California iTrader: (2)	just another happy vishnu customer here __________________ 2025 X5 50e 2024 M5 Competition 2015 M4 6MT - JB4 / Gintani DPs 2005 M3 6MT - VF Engineering S/C / KW / StopTech / Dinan / HPF Stage III (removed)- Track Toy
	Appreciate 0 Quote

07-01-2011, 10:42 PM	#121
335iLI Captain 37 Rep 634 Posts Drives: 335i Join Date: Nov 2009 Location: NY-LI iTrader: (5)	6-14 maps are great shiv ESP coming from 3-30. No more bog on shifts on my 6mt. My big problem is keeping my computer connected while updating. I bought the cable from radio shack(2nd cable) and it still disconnects. I put the computer in xp mode and did the performance mode and nothing. I keep having to bug my friends for the use of their xp laptops. Any suggestions. It was nice talking to you today on the phone. The meth kit is 90 percent done just need to get those connectors. Everything went smooth. First time takes the longest and it will be a breeze the next.
	Appreciate 0 Quote

07-01-2011, 10:54 PM	#122
akotten Major 38 Rep 1,079 Posts Drives: 2004 M3 Join Date: Mar 2011 Location: Wichita, KS iTrader: (2)	I hope I can get these maps soon! I'm looking to dyno my car soon and these sound like the way to go.
	Appreciate 0 Quote

07-01-2011, 11:15 PM	#124
akotten Major 38 Rep 1,079 Posts Drives: 2004 M3 Join Date: Mar 2011 Location: Wichita, KS iTrader: (2)	Doh! I can't believe I missed that. Downloading now! (Thank You)
	Appreciate 0 Quote

07-02-2011, 04:59 AM	#125
3coupe Captain 33 Rep 645 Posts Drives: BMW 335i Coupe 07 Join Date: May 2007 Location: Somewhere. iTrader: (2)	can anyone point me to where to reset adaptation procedures when you load a new firmware? __________________ BMW E92 335i retired: 04 BMW M3 \| 05 Honda S2000 \| 03 BMW 330ci \| 01 Honda Prelude \| 99 Acura Type-R
	Appreciate 0 Quote

07-02-2011, 08:47 AM	#127
pits200 Colonel 552 Rep 2,598 Posts Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh iTrader: (1)	Anyone else still get low boost codes under very light throttle? I'm still getting that problem but the check engine light goes away after about 30 seconds. My car runs great so I don't think I have an actual problem with the car.
	Appreciate 0 Quote

07-02-2011, 08:49 AM	#128
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Never got any on all beta maps __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

07-03-2011, 10:31 AM	#132
CSL335i Lieutenant 212 Rep 419 Posts Drives: M2 and... Join Date: Mar 2010 Location: Budapest/Hungary/Europe iTrader: (0)	As I have "power drop-in/out" on partial throttle at map1 6-14 DIC DCT while my speed and my foot on the gas pedal remain the same level, I went back to 3-30 DIC GAS X BETA 400 0DEG DCT map1 and the car feels brilliant on partial throttle (as well) with the same conditions. No "power drop-in/out", so i dont think the problem is related to my otherwise getting faulty HPFP. I can reproduce this anytime. Come on DCT guys, please try the 6-14 DIC maps to collect essential experiences. On the other hand, i downloaded User Software version 5.1. What are the differences between version 5.0 and 5.1? Anybody knows it?
	Appreciate 0 Quote