[SV Concepts III]

We sent you out the harness already? Please contact me directly for return instructions if you need to return the kit, nick@jlevisw.com

[MWcoupe]

hey, i just received my kit. i ordered 8000k and built in resistors. was told that theres no wire tapping needed.
and what i got was a 6000k kit and two gold load resistors. i would like to have my kit returned. thanks

[SV Concepts III]

Please email our orders department, orders@jlevisw.com and we can either arrange to exchange the bulbs or return the kit.

The resistors will require tapping using the included t-taps, they attach with a set of pliers and are fully reversible so they do not cause damage to your wiring.

[MWcoupe]

Originally Posted by Nick@Jlevi SW

The install is rather straight forward. The stock wiring plugs right into the resistor harness, resistor harness right into the ballast and igniter and then right into the HID bulb. All the plugs clip right together, there is no need to solder or tap any wires. It will take you about 10-15 minutes per side for the install.

thought the installation was straight forward, and no need to tap any wires? you guys had me waiting 1 whole month for the 8k and when its finally shipped i got a 6k kit and two gold resistors that needs to be taped into ballast. also theres no instructions at all. really disappointed and will not buy anything from your site anymore.

[SV Concepts]

Sir
Please send it back for a full refund including shipping. This is not typical of our service, and we apologize for any disappointment!

[SV Concepts III]

More of these just arrived this week.

[calvino]

I was also disappointed never got the resistors not cool

I have order many things from Jlevisw and never had a problem

[SV Concepts III]

It's an option on the product page that you have to select to get them sent out. If you did order them and never got them, please email us so we can send them out ASAP>

[jetblk328i]

hi i want to put these on a 328i e90 what would i need to do? any cutting/splicing/tapping also would i need to drill a hole back of the unit for wires to come thru?

[SV Concepts III]

You need to purchase the kit and select the resistors. The unit itself will plug right into your stock wiring, you will need to use our resistors to tap into the low beam wiring to prevent the bulb out warning from appearing.

[jetblk328i]

what is your opinion knowing alot more about e90 headlights than i do, would 4500K xenons be very bad to other drivers? i think the output should be fine for me, but i dont wanna be the guy who blinds everyone, i dont think ill be getting projector90s i saw a vid of 6000K by someone on this post, didnt look that bad....

[SV Concepts]

4500K, 6000K, none of this will make any difference in "blinding other drivers" - it's just color. OEM Xenons are 4100-4300K, the brightest available output - but they are slightly yellow (like sunlight), so most people prefer 6000K because it is a good compromise between light output and beautiful white/purple color.

As for blinding other drivers, this is just a matter of adjusting the height properly and ensuring that the driver's side headlight is lower than the passenger's side headlight
JL

[jetblk328i]

hmm so do you guys think these will be good for my halogen headlights? would i see a lot better? what are possible K you have?

[jetblk328i]

any pics of K colors+output on the road 4500 and 6000?

[calvino]

go 4500K is the same as BMW OEM I got the HID fogs to match my headlights and it lights the road pure white, I don't like 6000K is not my style

my friend have an a4 with halo housings and he got HID and he does not blind the other drivers, as long as you adjust the angle is fine and it looks great

[SV Concepts III]

I don't have color outputs on the road but here is a comparison between 4300k on the right and 6000k on the left:

[jetblk328i]

hmm they both look good, im thinking that 4300K will look like i have high beams on whereas perhaps with 6000K i am going too far?

[jetblk328i]

the beam pattern should be decent right? even in a reflector headlight? i dont want stuffed up wild beam pattern causing me to actually LOSE vision at night

[SV Concepts]

The beam will not have a cutoff and it will shine light all over the place but it's not too bad if you aim your fogs down
JL

[fullrev]

so we need resistors so the check control message wont come on?

[SV Concepts]

Yes sir

[nyc3r]

just sent email to cancel my order. was placed almost a month ago and still not processed, going to another vendor