[jgalaxy]

Originally Posted by Tonybest

Hmmm... either Glen use sarcasm, and Chris didn't pick up on it, or Glen doesn't know what Kevco is speaking about, and Chris didn't get that either.

Either way, Kevco should have been more clear on what E.R. was exactly...

I definitely didnt get it, unless it was related to the emergency room. It usually takes a generation to be out of tune with the universe.

[kenneth]

Originally Posted by jgalaxy

Do you really have to ask?

Yes I do, cos I don't know anything about snap oversteer and reliability of a 15-yr old "air-cooled" (even if low mileage) car

[Pseudo Nim]

Originally Posted by Tonybest

Hmmm... either Glen use sarcasm, and Chris didn't pick up on it, or Glen doesn't know what Kevco is speaking about, and Chris didn't get that either.

Either way, Kevco should have been more clear on what E.R. was exactly...

Originally Posted by kenneth

Yes I do, cos I don't know anything about snap oversteer and reliability of a 15-yr old "air-cooled" (even if low mileage) car

I totally think you should NOT do it. 15-yr old car? Really??? You still have a pretty good car right now (despite the ricey exhaust) - I think at some point the desire for a track-worthy car should yield to reason. When taken to the extreme, for instance, this yields me: I would never get the car Chris got, due to entire lack of creature comforts as he describes - UNLESS you plan on never using it as a DD, in which case ignore the whole paragraph.

[Pseudo Nim]

So what's the consensus on powder coating - where to go? I need my wheels powder coated urgently - like this week. Solid advance planning.

[montreal red]

Originally Posted by Pseudo Nim

So what's the consensus on powder coating - where to go? I need my wheels powder coated urgently - like this week. Solid advance planning.

lol... which wheels you getting powder coated?

last time i did some powder coat, i went to this company called XTM. you can google it... but the downside is that they took 3 whole weeks to get my wheels done and thats after numerous phone calls to bug them about it. they are slow as hell but were very cheap and did a good job. oh and they told me it was going to take a week but it took 3 weeks so dont believe them if they tell you it will be done in 3 or 4 days. it will take much longer than that.

[jgalaxy]

Originally Posted by kenneth

Yes I do, cos I don't know anything about snap oversteer and reliability of a 15-yr old "air-cooled" (even if low mileage) car

Chris nailed all the major issues. She'd make a sweet summer ride. Like Glenn said, it is a 15 yr old vehicle. Be prepared to spend a few bucks for cosmetic and general maintenance.

Originally Posted by Pseudo Nim

So what's the consensus on powder coating - where to go? I need my wheels powder coated urgently - like this week. Solid advance planning.

I used Exacte Roue on Hymus. They were reasonable and did a nice job. I have another guy in Rigaud as well that Seb uses from time to time. Let me know if you need that info.

[Kevco]

Originally Posted by Pseudo Nim

Considering what the wait times at the ER are these days I hardly find it awesome anymore...

Originally Posted by montreal red

last year i went for the meet in the morning but didnt do the ride... its nice to see some familiar faces at the meet but Pseudonim is right, the ride isnt that fun. there's too much traffic and cops and stupidities... i hope no one got into an accident this year?

Originally Posted by Tonybest

Hmmm... either Glen use sarcasm, and Chris didn't pick up on it, or Glen doesn't know what Kevco is speaking about, and Chris didn't get that either.

Either way, Kevco should have been more clear on what E.R. was exactly...

Originally Posted by jgalaxy

I definitely didnt get it, unless it was related to the emergency room. It usually takes a generation to be out of tune with the universe.

Emergency Ride.. I assumed you guys knew about it since over 1k cars showed up.. It was a nice ride from Laval all the way to Tremblant... Drinving on the 327 was lots of fun with all the nice mountain roads...

I got there early enough so I didn`t have to wait anywhere but I also agree with Pseudo Nim, there was police, dumb drivers and lots of traffic!!

I compiled all the BMW pictures I could find for you guys, I hope you enjoy!!
http://www.facebook.com/media/set/?s...1&l=07c8a5d6a1

[Pseudo Nim]

Originally Posted by montreal red

lol... which wheels you getting powder coated?

last time i did some powder coat, i went to this company called XTM. you can google it... but the downside is that they took 3 whole weeks to get my wheels done and thats after numerous phone calls to bug them about it. they are slow as hell but were very cheap and did a good job. oh and they told me it was going to take a week but it took 3 weeks so dont believe them if they tell you it will be done in 3 or 4 days. it will take much longer than that.

Doing the Mini wheels. I've wanted them black for the longest time, but didn't want to unmount the tires. Now that the Hankooks are done, and I want to mount new ones on the wheels, so it's a perfect time to powdercoat, as I wouldn't waste money remounting them.

Originally Posted by jgalaxy

Chris nailed all the major issues. She'd make a sweet summer ride. Like Glenn said, it is a 15 yr old vehicle. Be prepared to spend a few bucks for cosmetic and general maintenance.


I used Exacte Roue on Hymus. They were reasonable and did a nice job. I have another guy in Rigaud as well that Seb uses from time to time. Let me know if you need that info.

Let me know the Rigaud one, I'll check. Called the two above: Exact Roue wants $135/wheel, XTM wants $360 for the whole job, both promise a week of work. Was the XTM job decent? Price is very pleasant.

[montreal red]

Originally Posted by Pseudo Nim

Doing the Mini wheels. I've wanted them black for the longest time, but didn't want to unmount the tires. Now that the Hankooks are done, and I want to mount new ones on the wheels, so it's a perfect time to powdercoat, as I wouldn't waste money remounting them.



Let me know the Rigaud one, I'll check. Called the two above: Exact Roue wants $135/wheel, XTM wants $360 for the whole job, both promise a week of work. Was the XTM job decent? Price is very pleasant.

xtm job is pretty good but watch out for the wait times. they told me 1 week when i did my wheels and it ended up taking them 3 weeks. i had to call them repeatedly. hopefully they arent so busy now. if you have another set of rims for the mini then you dont have to worry. good thing i had extra set of rims so the 3 weeks wasnt that big a deal but i would be very pissed if my car was out of service for 3 weeks cos of rims.

[Pseudo Nim]

I'll give them a shout. 3 weeks is definitely too long as I'm going to put the winter tires on, which will suck a bit in this weather

[GewoW]

Originally Posted by jgalaxy

You still in Montreal or do they have you out in the hinterlands? I hope all is well. Hope to see you one of these days during one of our meets.

ya been in Montreal whole time. thx for the thought miss you this yr. i will likely be doing an october event at tremblant...I'll let you know

stressful year this one...

[jgalaxy]

Originally Posted by GewoW

ya been in Montreal whole time. thx for the thought miss you this yr. i will likely be doing an october event at tremblant...I'll let you know

stressful year this one...

If you plan to do an event this October, drop me a line. Would love to join.

[jgalaxy]

Originally Posted by Pseudo Nim

Doing the Mini wheels. I've wanted them black for the longest time, but didn't want to unmount the tires. Now that the Hankooks are done, and I want to mount new ones on the wheels, so it's a perfect time to powdercoat, as I wouldn't waste money remounting them.



Let me know the Rigaud one, I'll check. Called the two above: Exact Roue wants $135/wheel, XTM wants $360 for the whole job, both promise a week of work. Was the XTM job decent? Price is very pleasant.

I dont think the Rigaud guy will beat 360 for whole job. Typically $100+ per wheel. I'll find out tomorrow and email you.

[Nikos335i]

Originally Posted by Pseudo Nim

Doing the Mini wheels. I've wanted them black for the longest time, but didn't want to unmount the tires. Now that the Hankooks are done, and I want to mount new ones on the wheels, so it's a perfect time to powdercoat, as I wouldn't waste money remounting them.



Let me know the Rigaud one, I'll check. Called the two above: Exact Roue wants $135/wheel, XTM wants $360 for the whole job, both promise a week of work. Was the XTM job decent? Price is very pleasant.

They have done a few sets for me and my brother (you can see the the DPE's for sale ad if you want). Work is pretty good wait times not so great.

[GewoW]

Originally Posted by jgalaxy

If you plan to do an event this October, drop me a line. Would love to join.

I just registered for the event. It's a BMW Qc thing invite only. Instructors and advanced drivers - I'm sure you got the invite. October 20, 100$ for 140 minutes of track time. Register quick I'm pretty sure it's going to fill up quickly.

[jgalaxy]

Originally Posted by GewoW

I just registered for the event. It's a BMW Qc thing invite only. Instructors and advanced drivers - I'm sure you got the invite. October 20, 100$ for 140 minutes of track time. Register quick I'm pretty sure it's going to fill up quickly.

I couldnt find anything on the BMW Club of Qc site or forum, nor emails from Henry. Do you have a link?

[montreal red]

Originally Posted by GewoW

I just registered for the event. It's a BMW Qc thing invite only. Instructors and advanced drivers - I'm sure you got the invite. October 20, 100$ for 140 minutes of track time. Register quick I'm pretty sure it's going to fill up quickly.

wow thats an awesome deal... lots of track time for cheap is always a good thing.

[Tonybest]

Originally Posted by GewoW

I just registered for the event. It's a BMW Qc thing invite only. Instructors and advanced drivers - I'm sure you got the invite. October 20, 100$ for 140 minutes of track time. Register quick I'm pretty sure it's going to fill up quickly.

Kenneth told me about it...

Originally Posted by jgalaxy

I couldnt find anything on the BMW Club of Qc site or forum, nor emails from Henry. Do you have a link?

No link.. you need to have done at least 1 event with BMWQC this year.. which I haven't.

Originally Posted by montreal red

wow thats an awesome deal... lots of track time for cheap is always a good thing.

Yes it is. I will sadly pass on this even though I haven't been to LCMT in 2012.
My VIR trip will be my last of 2012.

PS chris... I have sent you a "WhatsApp" this morning...

[montreal red]

Originally Posted by Tonybest

Kenneth told me about it...



No link.. you need to have done at least 1 event with BMWQC this year.. which I haven't.



Yes it is. I will sadly pass on this even though I haven't been to LCMT in 2012.
My VIR trip will be my last of 2012.

PS chris... I have sent you a "WhatsApp" this morning...

didnt get the message or link either since i didnt do a single event with BMW QC this year. in fact i am not even a member of BMW QC. lol

i will pass on tremblant as well. i think VIR would be enough track time for us all (except for Joel who is a hopeless track addict )

[kenneth]

Originally Posted by GewoW

I just registered for the event. It's a BMW Qc thing invite only. Instructors and advanced drivers - I'm sure you got the invite. October 20, 100$ for 140 minutes of track time. Register quick I'm pretty sure it's going to fill up quickly.

Looks like we'll be parking neighbours. We almost were, back in June.... Self-Teching for this event will be sweet, so will the 6 lucky folks who will be drawn for the FREE instruction from ex-professional driver Claude Bourbonnais. I hope my name comes up.

For those who haven't done BMW QC events lately, note that they are keeping up with times.
For instance, advanced drivers are "soloed", meaning they have instructors assigned, but may only see their instructor maybe once during a 2day event. Of course, if you need help, they'll gladly hop in your car anytime. My last event (back in June) ALL my sessions were solo.

[GewoW]

Originally Posted by jgalaxy

I couldnt find anything on the BMW Club of Qc site or forum, nor emails from Henry. Do you have a link?

i'm sure you can email henry and he'll make it happen...if not...well, i'll be sure to do something with you next year

Originally Posted by kenneth

Looks like we'll be parking neighbours. We almost were, back in June.... Self-Teching for this event will be sweet, so will the 6 lucky folks who will be drawn for the FREE instruction from ex-professional driver Claude Bourbonnais. I hope my name comes up.

For those who haven't done BMW QC events lately, note that they are keeping up with times.
For instance, advanced drivers are "soloed", meaning they have instructors assigned, but may only see their instructor maybe once during a 2day event. Of course, if you need help, they'll gladly hop in your car anytime. My last event (back in June) ALL my sessions were solo.

excellent. can't wait bud!

[Nikos335i]

Count me in as well will be there also!