[Josh1a1h]

Originally Posted by richk84

Why did he want that look???

Can you not get the newer V4 rings that change colour?

He wanted the V2 Beaded look. Each to their own i guess. It suits his Swarovski Crystal BMW Badges

[skelts]

Loving the exhaust yesterday mate, sounds insane under load.

[AWBimmer]

Originally Posted by skelts

Loving the exhaust yesterday mate, sounds insane under load.

+1

[Josh1a1h]

Originally Posted by skelts

Loving the exhaust yesterday mate, sounds insane under load.

Cheers Mate!


Its no V10 Monster though

The M6 was looking very clean! Love the mods you have done and the paint was looking mental in the sun yesterday!

[skelts]

Originally Posted by Josh1a1h

Cheers Mate!


Its no V10 Monster though

The M6 was looking very clean! Love the mods you have done and the paint was looking mental in the sun yesterday!

Thanks mate. Long way to go yet to get it to your boys standard

[Josh1a1h]

So this may be happening in the next couple days.

New Custom Splitter.
2 carbon splitters bonded together

It will only be on for shows because i cannot see myself daily driving with the car super super low. Would just make it horrible to drive daily

[Josh1a1h]

Also would like to confirm the bosch wiper blades i bought from EuroCarParts fit perfectly with no issues at all. Bargain at £20 with their 30% discount

http://www.eurocarparts.com/ecp/c/BM...b8db998&000604

[AWBimmer]

That splitter looks EPIC mate! Epic!

[Ajerthan]

that splitter! <3

[Josh1a1h]

Originally Posted by skelts

Loving the exhaust yesterday mate, sounds insane under load.

Originally Posted by AWBimmer

That splitter looks EPIC mate! Epic!

Cheers Bro!

Originally Posted by Ajerthan

that splitter! <3

Yo Aj! i know you already have the top part of the splitter in ABS plastic on your car right?

I had to get it specifically made up in Carbon because i heard you already had it

and anyway... when are you going to get some pro shots up of your car huh!? Been way too long

[Josh1a1h]

UPDATE 15th March 2014

Well Mstyle in Romford have been so good to me! Especially James and Ian who there.
(YOU SHOULD ASK FOR THEM IF YOU WANT ANY PARTS OR WORK DONE!)
They have been patient and done everything I have wanted even when i changed my mind over and over again.

Anyway i originally had specific plans for a front carbon splitter for my front end.
But Prior Designs 1M bumper wasn't compatible with original 1M splitters, which means you are limited to what you can buy.

Prior designs do a splitter specifically for their 1m bumper, but it only came in ABS Plastic...
DEFINITELY NOT GOING TO WORK FOR ME! And because it was abs plastic, it looked as if it got lost under the 1m bumper.
So I asked James if they could make me a Carbon Fibre version... and he said yes without hesitating.
I was excited and couldn't wait!!!

But i wasn't sure if it was enough.

Mstyle had a carbon splitter they were already using on the bottom of their 1M bumpers, but IMO it looked like a very bolt on job and didnt really work.

SO James and I had the idea of sandwiching them together to create a custom splitter.
It looked like this. The result looked like this



The splitter has been ready for a while, but i have been so paranoid to put it on because it would make my car nearly undriveable. We both didn't realise how low the front end would be.
I am not super low but it would make daily driving difficult.

Anyway i went down to Mstyle to collect it from James on Friday so I could fit it in time for an Ace Cafe show held by Bimmerboys on Saturday.
But the splitter wasn't available as it was locked away and the boss had the key.

So James said why dont you just try the regular upper carbon version.
I thought why not because i can see how low everything gets.

So here it is with the bumper sitting on the splitter, lining it all up before bolting the splitter to the bumper.

At this point I immediately liked what i saw.




Once it was on and after a little clean



I am just about sitting right in terms of height IMO and can still just about get over things.
BUT I HAVE A FEW PLANS IN THAT DEPARTMENT so stay tuned

Anyway I have a few things which are going on before the summer shows, so a pro shoot will happen then

HUGE THANKS TO JAMES Mstyle FOR SETTING THIS UP FOR ME

This is the perfect finish to my front end. Doesn't look over the top, but the carbon is clearly visible and set itself apart form the paint work and as it is moulded to the shape of the bumper, it looks like it is meant to belong.






UPDATED PICS FROM ACE CAFE BIMMER BOYS START OF THE SHOW SEASON MEET

[Ajs_435d]

Looks great fella!

[Tak1986]

Looks awesome!!!!

[TOIB1984]

hey, love what you did to your car, one of the most amazing e92 i have seen on the road so far absolute brilliant stuff and can see how much effort has gone in to it, well worth it in the end result...

had two questions

1) how and did put your number plate like that????
love it the way it looks

2) where can i buy the same Blue Wheel Nuts & Stud Kit from?

[Josh1a1h]

Originally Posted by ajs_335d

Looks great fella!

Cheers mate!

Originally Posted by Tak1986

Looks awesome!!!!

Thanks!!!

Originally Posted by TOIB1984

hey, love what you did to your car, one of the most amazing e92 i have seen on the road so far absolute brilliant stuff and can see how much effort has gone in to it, well worth it in the end result...

had two questions

1) how and did put your number plate like that????
love it the way it looks

2) where can i buy the same Blue Wheel Nuts & Stud Kit from?

Very kind words bud! Really appreciate it!

1. It was a fluke find. I searched license plate brackets on amazon and came across it . I cannot find it anymore. BUT AWBimmer on here (Sam) found it recently. So maybe send him a PM and ask him.

2. The wheel nut and stud kit i sourced from Mstyle. The brand is called Muteki and they sourced them for me. Speak to Ian if you need some help and mention Josh sent you and they should hopefully give you a better price.

Good luck mate, sorry i couldn't have been of more help

[old grey steve]

I must stop looking at threads like this and going to meets Josh you're bad for my finances as I seem to spend money when nice cars and my eyes meet, hence the M Sport rear bumper and genuine performance defuser that my wife's moaning about that keeps getting in her bloody wayjust need some time to get it painted (including figuring out whether to do something different re painting the defuser)and getting it fitted.

Next side skirts(oh what to do) and decision re front bumper oh and wheels

[D_Boi]

Great little addition... Love this car bro

[AWBimmer]

Mannn this is the ONE!

[Josh1a1h]

Originally Posted by old grey steve

I must stop looking at threads like this and going to meets Josh you're bad for my finances as I seem to spend money when nice cars and my eyes meet, hence the M Sport rear bumper and genuine performance defuser that my wife's moaning about that keeps getting in her bloody wayjust need some time to get it painted (including figuring out whether to do something different re painting the defuser)and getting it fitted.

Next side skirts(oh what to do) and decision re front bumper oh and wheels

HAHAH Cheers bro!

It has got to be done mate! I look forward to seeing the progress!!! Get some m3 skirts and sort out your wheels asap.

Originally Posted by D_Boi

Great little addition... Love this car bro

Cheers mate!

Originally Posted by AWBimmer

Mannn this is the ONE!

You know it Sam!!!! Now get painting


HERE IS ANOTHER ONE CAUGHT AT THE SHOW OF MY ASS
Thought this pic came out nicely!

[Alfamale]

Looks great, and tastefully done too.

You tempted to get chrome window trims blacked out?

[Josh1a1h]

Lol they aren't chrome haha

Just so sunny that day that the matte black wrapped trim even was shiny HAHA

[AWBimmer]

That last pic is money