BMW CODING success

lamia2super · 02-08-2011, 04:10 PM

Quote:

Originally Posted by Shaun@AWDMotorsports

Has anyone coded a car with the procede installed every time I try to code it i get error 0616 (HUD) so i removed the procede and tried again and the same code came up 0616 it wont let me delete it or access it so i cant do nothing...can anyone help me out

I heard that the only way to code a car with the procede is to completely remove it

b1gmac88 · 02-08-2011, 04:15 PM

^ I had a Jb4 on and until I set it to Map 0, I couldnt communicate with the car.

On a side not, I cant get the Windows Up with fob and Gong to work. Before I had the ! mark with the gear around it I had the key fob window closing working and now I activate it and nothing happens. Anyone have this happen?? Same thing with the Gong. I keep activating then de-avtivating it and no matter what the sound comes back!?!?!

lamia2super · 02-08-2011, 04:57 PM

Quote:

Originally Posted by b1gmac88

^ I had a Jb4 on and until I set it to Map 0, I couldnt communicate with the car.

On a side not, I cant get the Windows Up with fob and Gong to work. Before I had the ! mark with the gear around it I had the key fob window closing working and now I activate it and nothing happens. Anyone have this happen?? Same thing with the Gong. I keep activating then de-avtivating it and no matter what the sound comes back!?!?!

JB4 works fine but apparently the way the procede is wired up it doesn't work......at-least that's what i was told

Shaun@AW · 02-08-2011, 05:38 PM

Quote:

Originally Posted by AoshichanX

It works on my 2007 e90 335i w/ v5. Check my youtube vid for proof...you can see the RPM confirm Map 2 =]

Link for the vid...

rubdom · 02-08-2011, 05:58 PM

Anyone know why I would not be able to read or code to the following:

TCUM
2MULF
CID

Any help is appreciated!

yakev724 · 02-08-2011, 07:48 PM

Quote:

Originally Posted by Pseudo Nim

Now I know what you're talking about. Yes, my car has the wires in the right place as well, and yes, I agree, it does make sense that they should be for paddles - since those are the ones you're supposed to tap into to make it work directly anyway.

Is it possible adding ZSP (sport package) to the car's VO will enable paddle shift?

As soon as I get my cable in the mail and get everything working, I'll play around with the possibility and of course post results. Until then I'll just have to lurk...

top priority for me is this damn column lock, why I looked into this coding in the first place.

Toshi · 02-08-2011, 07:58 PM

Can we code "S231A DELETE 250 KM/H LIMITATION" by NCS Expert?
Do we need any extra hardware or wiring?

xxxjecxxx · 02-08-2011, 10:23 PM

Quote:

Originally Posted by Toshi

Can we code "S231A DELETE 250 KM/H LIMITATION" by NCS Expert?
Do we need any extra hardware or wiring?

won't let me add that to my VO. I tried adding sports package i think was $330 and still speed limited to 135

not that I need to drive more than 100mph i just want to be able to "do it"

Toshi · 02-08-2011, 11:22 PM

Hmmmm

Quote:

Originally Posted by xxxjecxxx

won't let me add that to my VO. I tried adding sports package i think was $330 and still speed limited to 135

not that I need to drive more than 100mph i just want to be able to "do it"

Pseudo Nim · 02-09-2011, 05:47 PM

I think LCIs have it by default, no? At least I see lots of LCIs with AEs as DRLs, and they are hardly ever modified.

BlaSTiWi · 02-09-2011, 06:20 PM

Do you have Xenon?

AFAIK the DRL will will be on AE by default on LCI w/ Xenon otherwise the high beam (inner round reflector) for non-Xenon/Halogen.

Quote:

Originally Posted by lemanse92

is there anyway to code on an LCI x28i to have the AE's work as the DRL?

4CEFED · 02-09-2011, 06:42 PM

Just want to give a shout out to Junior for helping me get going on coding my car. This is just plain amazing. I so far coded folding mirrors with KF and CA plus windows up with KF. Thanks again xxxjecxxx. Donation sent for your school fund.

themyst · 02-09-2011, 09:29 PM

The dealer replaced the HPFP and software on my MY09 E90 335i with the Procede still installed.

It was on Map 0 (stock) when I brought it in and they had no problems.

Wissam · 02-09-2011, 10:10 PM

You know you're getting good at this coding stuff when you start coding things that don't even exist in the owner's manual!!...anyways, my CBS Service menu has now a new maintenance item which was not there before I started coding...see picture below...my guess is that this was added somehow during my failed attempts to code the main CAS module and the consequent gear/! warning...all the more reason to never ever try to code a main module and stick with coding the sub-modules only...my owner's manual doesn't have this symbol, and the 11/2021 date in the symbol would be exactly 15 years after my build date...any clue to what this symbol represents? is it something that was added to later models E90?

lamia2super · 02-09-2011, 10:13 PM

Quote:

Originally Posted by Wissam

You know you're getting good at this coding stuff when you start coding things that don't even exist in the owner's manual!!...anyways, my CBS Service menu has now a new maintenance item which was not there before I started coding...see picture below...my guess is that this was added somehow during my failed attempts to code the main CAS module and the consequent gear/! warning...all the more reason to never ever try to code a main module and stick with coding the sub-modules only...my owner's manual doesn't have this symbol, and the 11/2021 date in the symbol would be exactly 15 years after my build date...any clue to what this symbol represents? is it something that was added to later models E90?

it means that at 11/2021 your car is going to blow up! lol

AW128i · 02-09-2011, 10:21 PM

Quote:

Originally Posted by Wissam

You know you're getting good at this coding stuff when you start coding things that don't even exist in the owner's manual!!...anyways, my CBS Service menu has now a new maintenance item which was not there before I started coding...see picture below...my guess is that this was added somehow during my failed attempts to code the main CAS module and the consequent gear/! warning...all the more reason to never ever try to code a main module and stick with coding the sub-modules only...my owner's manual doesn't have this symbol, and the 11/2021 date in the symbol would be exactly 15 years after my build date...any clue to what this symbol represents? is it something that was added to later models E90?

I'm guessing it has something to do with emissions inspection. I say this because the same symbol shown at the front of the car is for the "roadworthiness test"; i.e., the annual, bi-annual, or whatever inspection that many states/locales have. Since the symbol shows stuff coming out of the tailpipe with the same infinity-looking character above it, I'm guessing it's emissions-related. Maybe it's diesel-related??

Pseudo Nim · 02-09-2011, 10:55 PM

Quote:

Originally Posted by AW128i

I'm guessing it has something to do with emissions inspection. I say this because the same symbol shown at the front of the car is for the "roadworthiness test"; i.e., the annual, bi-annual, or whatever inspection that many states/locales have. Since the symbol shows stuff coming out of the tailpipe with the same infinity-looking character above it, I'm guessing it's emissions-related. Maybe it's diesel-related??

Hmm. He drives a 328i, which was never available in diesel, AFAIK.

Toshi · 02-09-2011, 11:10 PM

Quote:

Originally Posted by Wissam

You know you're getting good at this coding stuff when you start coding things that don't even exist in the owner's manual!!...anyways, my CBS Service menu has now a new maintenance item which was not there before I started coding...see picture below...my guess is that this was added somehow during my failed attempts to code the main CAS module and the consequent gear/! warning...all the more reason to never ever try to code a main module and stick with coding the sub-modules only...my owner's manual doesn't have this symbol, and the 11/2021 date in the symbol would be exactly 15 years after my build date...any clue to what this symbol represents? is it something that was added to later models E90?

Hahaha... That's very funny.

Japan-spec BMW has this symbol.
You coded your car to Japan-spec successfully. Congratulations!

xxxjecxxx · 02-10-2011, 12:57 AM

Quote:

Originally Posted by Toshi

Hahaha... That's very funny.

Japan-spec BMW has this symbol.
You coded your car to Japan-spec successfully. Congratulations!

lol

xxxjecxxx · 02-10-2011, 01:09 AM

Quote:

Originally Posted by Wissam

You know you're getting good at this coding stuff when you start coding things that don't even exist in the owner's manual!!...anyways, my CBS Service menu has now a new maintenance item which was not there before I started coding...see picture below...my guess is that this was added somehow during my failed attempts to code the main CAS module and the consequent gear/! warning...all the more reason to never ever try to code a main module and stick with coding the sub-modules only...my owner's manual doesn't have this symbol, and the 11/2021 date in the symbol would be exactly 15 years after my build date...any clue to what this symbol represents? is it something that was added to later models E90?

it was there before you started coding. my car is 2006 325i I have the same thing. make sure to set your date correctly. I don't think anything to be serviced in your car should be 15 years out.

Pseudo Nim · 02-10-2011, 11:28 AM

Still hoping someone is able to code the paddle shift to work without having to rewire it... wonder if adding ZSP helps?

Toshi · 02-10-2011, 01:02 PM

I am now able to code both CCC(CAPPL) and CIC but I am getting errors when I try to code FRM.
Anybody share your complete/flawless set of the latest files, please?

02-08-2011, 04:15 PM	#1322
b1gmac88 Captain 91 Rep 953 Posts Drives: 335i e92 Join Date: Jan 2008 Location: E Coast iTrader: (16)	^ I had a Jb4 on and until I set it to Map 0, I couldnt communicate with the car. On a side not, I cant get the Windows Up with fob and Gong to work. Before I had the ! mark with the gear around it I had the key fob window closing working and now I activate it and nothing happens. Anyone have this happen?? Same thing with the Gong. I keep activating then de-avtivating it and no matter what the sound comes back!?!?!
	Appreciate 0 Quote

02-08-2011, 05:58 PM	#1325
rubdom Private First Class 8 Rep 117 Posts Drives: 08 E90 AW Join Date: Feb 2010 Location: San Antonio iTrader: (2)	Anyone know why I would not be able to read or code to the following: TCUM 2MULF CID Any help is appreciated!
	Appreciate 0 Quote

02-08-2011, 07:58 PM	#1327
Toshi Second Lieutenant 62 Rep 200 Posts Drives: BMW M850i xDrive Coupe (G15) Join Date: Aug 2010 Location: Tokyo iTrader: (1)	Can we code "S231A DELETE 250 KM/H LIMITATION" by NCS Expert? Do we need any extra hardware or wiring? __________________ [ Present ] 2021 BMW M850i xDrive Coupe (G15) [ Retired ] 2014 ALPINA B4 BiTurbo Coupe (F32)
	Appreciate 0 Quote

02-09-2011, 05:47 PM	#1330
Pseudo Nim twinborific 120 Rep 4,836 Posts Drives: fast, sometimes slow Join Date: Nov 2008 Location: i am a citizen of the world iTrader: (9)	I think LCIs have it by default, no? At least I see lots of LCIs with AEs as DRLs, and they are hardly ever modified. __________________ Doko ni itemo, hito wa tsunagatte iru...
	Appreciate 0 Quote

02-09-2011, 06:42 PM	#1332
4CEFED AKA: MyKaL 21 Rep 202 Posts Drives: 2009 E92 335i Join Date: Nov 2009 Location: North Texas iTrader: (2)	Just want to give a shout out to Junior for helping me get going on coding my car. This is just plain amazing. I so far coded folding mirrors with KF and CA plus windows up with KF. Thanks again xxxjecxxx. Donation sent for your school fund. __________________ Still not faster then a crown vic!!!
	Appreciate 0 Quote

02-09-2011, 09:29 PM	#1333
themyst Major General 189 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	The dealer replaced the HPFP and software on my MY09 E90 335i with the Procede still installed. It was on Map 0 (stock) when I brought it in and they had no problems. __________________ E90 LCI N54 6AT
	Appreciate 0 Quote

02-09-2011, 10:10 PM	#1334
Wissam Private First Class 20 Rep 141 Posts Drives: 2007 e90 328I Join Date: Dec 2006 Location: GTA, Canada iTrader: (3)	You know you're getting good at this coding stuff when you start coding things that don't even exist in the owner's manual!!...anyways, my CBS Service menu has now a new maintenance item which was not there before I started coding...see picture below...my guess is that this was added somehow during my failed attempts to code the main CAS module and the consequent gear/! warning...all the more reason to never ever try to code a main module and stick with coding the sub-modules only...my owner's manual doesn't have this symbol, and the 11/2021 date in the symbol would be exactly 15 years after my build date...any clue to what this symbol represents? is it something that was added to later models E90? Attached Images
	Appreciate 0 Quote

02-10-2011, 11:28 AM	#1341
Pseudo Nim twinborific 120 Rep 4,836 Posts Drives: fast, sometimes slow Join Date: Nov 2008 Location: i am a citizen of the world iTrader: (9)	Still hoping someone is able to code the paddle shift to work without having to rewire it... wonder if adding ZSP helps? __________________ Doko ni itemo, hito wa tsunagatte iru...
	Appreciate 0 Quote

02-10-2011, 01:02 PM	#1342
Toshi Second Lieutenant 62 Rep 200 Posts Drives: BMW M850i xDrive Coupe (G15) Join Date: Aug 2010 Location: Tokyo iTrader: (1)	I am now able to code both CCC(CAPPL) and CIC but I am getting errors when I try to code FRM. Anybody share your complete/flawless set of the latest files, please? __________________ [ Present ] 2021 BMW M850i xDrive Coupe (G15) [ Retired ] 2014 ALPINA B4 BiTurbo Coupe (F32)
	Appreciate 0 Quote