BMW CODING success

onebadmofo · 02-18-2011, 04:41 PM

"Soft" you can see in my video, it's gradual turn on. Hard is instant-on.

onebadmofo · 02-18-2011, 04:44 PM

Here's mine as seen here

Code:

WL_AL 
	nicht_aktiv
WL_BLK_H
	nicht_aktiv
WL_BLK_V
	nicht_aktiv
WL_DAUER
	wert_01
WL_FL
	nicht_aktiv
WL_KZL
	soft_einschalten
WL_MAX_DAUER
	wert_01
WL_NSL
	soft_einschalten
WL_NSW
	soft_einschalten
WL_POL
	soft_einschalten
WL_SL_1
	soft_einschalten
WL_SL_2
	soft_einschalten

Here's description of each string

Code:

WL_AL                       LOW BEAMS ON WHEN WELCOME LIGHT ACTIVATED [not tested]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_BLK_H                    REAR TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
WL_BLK_V                    FRONT TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_DAUER                    WELCOME LIGHT DURATION [doesn't work]
    wert_01                     value 01
WL_FL                       HIGH BEAMS ON WHEN WELCOME LIGHT ACTIVATED [doesn't work]
    nicht_aktiv                 not active
WL_KZL                      License plate light [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_MAX_DAUER                [???]
    wert_01                     value 01
WL_MIT_FLC                  [???]
    aktiv                       active
    nicht_aktiv                 not active
WL_NSL                      REAR FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_NSW                      FRONT FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_POL                      [???]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_1                     PARKING LIGHTS 1 ON WHEN WELCOME LIGHT ACTIVATED [AE's]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_2                     PARKING LIGHTS 2 ON WHEN WELCOME LIGHT ACTIVATED [Corners]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten

outie · 02-18-2011, 05:57 PM

Quote:

Originally Posted by onebadmofo

Here's mine as seen here

Code:

WL_AL 
	nicht_aktiv
WL_BLK_H
	nicht_aktiv
WL_BLK_V
	nicht_aktiv
WL_DAUER
	wert_01
WL_FL
	nicht_aktiv
WL_KZL
	soft_einschalten
WL_MAX_DAUER
	wert_01
WL_NSL
	soft_einschalten
WL_NSW
	soft_einschalten
WL_POL
	soft_einschalten
WL_SL_1
	soft_einschalten
WL_SL_2
	soft_einschalten

Here's description of each string

Code:

WL_AL                       LOW BEAMS ON WHEN WELCOME LIGHT ACTIVATED [not tested]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_BLK_H                    REAR TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
WL_BLK_V                    FRONT TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_DAUER                    WELCOME LIGHT DURATION [doesn't work]
    wert_01                     value 01
WL_FL                       HIGH BEAMS ON WHEN WELCOME LIGHT ACTIVATED [doesn't work]
    nicht_aktiv                 not active
WL_KZL                      License plate light [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_MAX_DAUER                [???]
    wert_01                     value 01
WL_MIT_FLC                  [???]
    aktiv                       active
    nicht_aktiv                 not active
WL_NSL                      REAR FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_NSW                      FRONT FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_POL                      [???]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_1                     PARKING LIGHTS 1 ON WHEN WELCOME LIGHT ACTIVATED [AE's]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_2                     PARKING LIGHTS 2 ON WHEN WELCOME LIGHT ACTIVATED [Corners]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten

I see you have "WL_POL" set to "soft" and then "not active" in the description. Which one do you have it really set as? Is that the corner orange LED in the headlight? Thanks.

antiks · 02-18-2011, 07:45 PM

Quote:

Originally Posted by onebadmofo

Here's mine as seen here

Code:

WL_AL 
	nicht_aktiv
WL_BLK_H
	nicht_aktiv
WL_BLK_V
	nicht_aktiv
WL_DAUER
	wert_01
WL_FL
	nicht_aktiv
WL_KZL
	soft_einschalten
WL_MAX_DAUER
	wert_01
WL_NSL
	soft_einschalten
WL_NSW
	soft_einschalten
WL_POL
	soft_einschalten
WL_SL_1
	soft_einschalten
WL_SL_2
	soft_einschalten

Here's description of each string

Code:

WL_AL                       LOW BEAMS ON WHEN WELCOME LIGHT ACTIVATED [not tested]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_BLK_H                    REAR TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
WL_BLK_V                    FRONT TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_DAUER                    WELCOME LIGHT DURATION [doesn't work]
    wert_01                     value 01
WL_FL                       HIGH BEAMS ON WHEN WELCOME LIGHT ACTIVATED [doesn't work]
    nicht_aktiv                 not active
WL_KZL                      License plate light [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_MAX_DAUER                [???]
    wert_01                     value 01
WL_MIT_FLC                  [???]
    aktiv                       active
    nicht_aktiv                 not active
WL_NSL                      REAR FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_NSW                      FRONT FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_POL                      [???]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_1                     PARKING LIGHTS 1 ON WHEN WELCOME LIGHT ACTIVATED [AE's]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_2                     PARKING LIGHTS 2 ON WHEN WELCOME LIGHT ACTIVATED [Corners]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten

what module is that in?

I see it in the full Cas trc file; but I think I went through my whole sub module list and couldn't find any WL options..

E90PAT · 02-18-2011, 08:21 PM

I just requested spreadsheet access,

pselan16

BabyBlack · 02-18-2011, 08:22 PM

WL-welcome light should be under FRM module

antiks · 02-18-2011, 09:03 PM

Quote:

Originally Posted by BabyBlack

WL-welcome light should be under FRM module

mine doesn't have it in the FRM at all..

BPMSport · 02-18-2011, 09:15 PM

Quote:

Originally Posted by antiks

mine doesn't have it in the FRM at all..

It will be in the NFRM on your car.

I requested access to the spreadsheet as well, just to help others. Whoever controls it add me to the access list if you wish.

antiks · 02-18-2011, 09:37 PM

Quote:

Originally Posted by Mike@Powerchip

It will be in the NFRM on your car.

I requested access to the spreadsheet as well, just to help others. Whoever controls it add me to the access list if you wish.

I don't have the NFRM module either..07 build

BPMSport · 02-18-2011, 10:15 PM

Quote:

Originally Posted by antiks

I don't have the NFRM module either..07 build

Post a screen shot of the modules you have...

I haven't seen an E9x without the FRM or NFRM - don't think that's even possible unless they are using a body module for some reason on your variant.

rubdom · 02-18-2011, 10:46 PM

I coded the hazard lights to double blink.

DOPPELBLINKIMPULS_WARNBLK

I wonder if this could get me tickets? Thoughts?

antiks · 02-18-2011, 10:49 PM

Quote:

Originally Posted by Mike@Powerchip

Post a screen shot of the modules you have...

I haven't seen an E9x without the FRM or NFRM - don't think that's even possible unless they are using a body module for some reason on your variant.

I have the FRM, but none of the WL_ or Welcome is in there

lopealle · 02-18-2011, 10:50 PM

I doubt it will

BPMSport · 02-18-2011, 11:07 PM

Quote:

Originally Posted by antiks

I have the FRM, but none of the WL_ or Welcome is in there

I do not believe that 2007 cars (unless they are late 07's) have welcome light functions. The model year needs to be 2008.

antiks · 02-18-2011, 11:09 PM

Quote:

Originally Posted by Mike@Powerchip

I do not believe that 2007 cars (unless they are late 07's) have welcome light functions. The model year needs to be 2008.

ok..that might explain it; and even though it's in the full .trc file when you load the chasis and CAS; it's not necessarily in the modules? I see it in the FSW_PSW.TRC file w/ all the modules together

woodpecka · 02-18-2011, 11:29 PM

I have searched the threads without founding the answer.

Anyone know how to remove an airbag error?

I need to clear a warning ASAP and I'm not sure if this tool can do it.

BeWide · 02-19-2011, 04:28 AM

Quote:

Originally Posted by antiks

found these translations for the Welcome lights; i'm gonna make mine real easy to find in the parking lot now..lol

Control unit: LMA

WELCOME_LIGHT_ACTIVE
nicht_aktiv -> active
WL_AL = low beam
nicht_aktiv / hart_einschalten
WL_BL = brake light
nicht_aktiv soft_einschalten / / hart_einschalten
WL_BLK_H = Left Rear
nicht_aktiv soft_einschalten / / hart_einschalten
WL_BLK_V = front indicator
nicht_aktiv soft_einschalten / / hart_einschalten
WL_FL = beam
nicht_aktiv soft_einschalten / / hart_einschalten
WL_KZL = plate light
nicht_aktiv soft_einschalten / / hart_einschalten
WL_NSL = rear fog lamp
nicht_aktiv soft_einschalten / / hart_einschalten
WL_NSW = fog
nicht_aktiv soft_einschalten / / hart_einschalten
WL_POL = position or the front parking light
nicht_aktiv soft_einschalten / / hart_einschalten
WL_SL_1 = closing or parking light rear 1
nicht_aktiv soft_einschalten / / hart_einschalten
WL_SL_2 = closing or parking lights, rear 2
nicht_aktiv soft_einschalten / / hart_einschalten
WL_SM = Eyebrow
nicht_aktiv soft_einschalten / / hart_einschalten

One says is in the LMA module, another in FRM or NFRM module .

I want to add these function in the spreadsheet so please specify .

NiVeDh · 02-19-2011, 09:45 AM

Just requested access to the spreadsheet.

spera23 · 02-19-2011, 10:13 AM

I have been able to code these welcome light features on my 07 e92, yet still have no been able to disable the orange LED DRL's.

Can anyone help me with this???

Quote:

Originally Posted by onebadmofo

Here's mine as seen here

Code:

WL_AL 
	nicht_aktiv
WL_BLK_H
	nicht_aktiv
WL_BLK_V
	nicht_aktiv
WL_DAUER
	wert_01
WL_FL
	nicht_aktiv
WL_KZL
	soft_einschalten
WL_MAX_DAUER
	wert_01
WL_NSL
	soft_einschalten
WL_NSW
	soft_einschalten
WL_POL
	soft_einschalten
WL_SL_1
	soft_einschalten
WL_SL_2
	soft_einschalten

Here's description of each string

Code:

WL_AL                       LOW BEAMS ON WHEN WELCOME LIGHT ACTIVATED [not tested]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_BLK_H                    REAR TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
WL_BLK_V                    FRONT TURN SIGNALS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_DAUER                    WELCOME LIGHT DURATION [doesn't work]
    wert_01                     value 01
WL_FL                       HIGH BEAMS ON WHEN WELCOME LIGHT ACTIVATED [doesn't work]
    nicht_aktiv                 not active
WL_KZL                      License plate light [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_MAX_DAUER                [???]
    wert_01                     value 01
WL_MIT_FLC                  [???]
    aktiv                       active
    nicht_aktiv                 not active
WL_NSL                      REAR FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_NSW                      FRONT FOG LIGHTS ON WHEN WELCOME LIGHT ACTIVATED [works]
    nicht_aktiv                 not active
    soft_einschalten            
WL_POL                      [???]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_1                     PARKING LIGHTS 1 ON WHEN WELCOME LIGHT ACTIVATED [AE's]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten            
WL_SL_2                     PARKING LIGHTS 2 ON WHEN WELCOME LIGHT ACTIVATED [Corners]
    hart_einschalten            
    nicht_aktiv                 not active
    soft_einschalten

NiVeDh · 02-19-2011, 10:15 AM

To disable the orange LED on the E92, try these:

SIDEMARKER_US_NFRM: nicht_aktiv
PO_RL_FKT_MIT_SL_V: nicht_aktiv
PWM_SL_V_BEI_AKTIVEN_AL: wert_04
PWM_SL_V_BEI_AKTIVEN_FL: wert_04

spera23 · 02-19-2011, 10:35 AM

Thanks, I see those values when I read the entire CAS file, but I cannot locate them anywhere in the individual modules.

Is it possible everyone has these but me? lol

Quote:

Originally Posted by NiVeDh

To disable the orange LED on the E92, try these:

SIDEMARKER_US_NFRM: nicht_aktiv
PO_RL_FKT_MIT_SL_V: nicht_aktiv
PWM_SL_V_BEI_AKTIVEN_AL: wert_04
PWM_SL_V_BEI_AKTIVEN_FL: wert_04

NiVeDh · 02-19-2011, 10:51 AM

Quote:

Originally Posted by spera23

Thanks, I see those values when I read the entire CAS file, but I cannot locate them anywhere in the individual modules.

Is it possible everyone has these but me? lol

They should be in the FRM or NFRM.

02-18-2011, 04:41 PM	#1453
onebadmofo Colonel 353 Rep 2,394 Posts Drives: 2008 E90 M3 Join Date: Aug 2010 Location: Central NJ iTrader: (14)	"Soft" you can see in my video, it's gradual turn on. Hard is instant-on.
	Appreciate 0 Quote

02-18-2011, 08:21 PM	#1457
E90PAT SOFLO CODING 209 Rep 3,587 Posts Drives: Z4M Join Date: Apr 2009 Location: SoFla iTrader: (18)	I just requested spreadsheet access, pselan16
	Appreciate 0 Quote

02-18-2011, 08:22 PM	#1458
BabyBlack First Lieutenant 28 Rep 304 Posts Drives: E46 M3 & E90 335i & E71 X6M Join Date: Jun 2006 Location: Canada iTrader: (3)	WL-welcome light should be under FRM module
	Appreciate 0 Quote

02-18-2011, 10:46 PM	#1463
rubdom Private First Class 8 Rep 117 Posts Drives: 08 E90 AW Join Date: Feb 2010 Location: San Antonio iTrader: (2)	I coded the hazard lights to double blink. DOPPELBLINKIMPULS_WARNBLK I wonder if this could get me tickets? Thoughts?
	Appreciate 0 Quote

02-18-2011, 10:50 PM	#1465
lopealle Resident Black Guy 268 Rep 2,302 Posts Drives: Lion Join Date: May 2009 Location: Federal Way, WA iTrader: (2) Garage List 2006 M5 [10.00]	I doubt it will
	Appreciate 0 Quote

02-18-2011, 11:29 PM	#1468
woodpecka Major 73 Rep 1,026 Posts Drives: E91 Join Date: May 2010 Location: Montreal iTrader: (2)	I have searched the threads without founding the answer. Anyone know how to remove an airbag error? I need to clear a warning ASAP and I'm not sure if this tool can do it. Last edited by woodpecka; 02-19-2011 at 12:44 AM..
	Appreciate 0 Quote

02-19-2011, 09:45 AM	#1470
NiVeDh Major General 426 Rep 8,003 Posts Drives: '08 E90 335i, '99 E36 M3 Join Date: Apr 2009 Location: Houston, TX & Atlanta, GA iTrader: (132) Garage List 2008 BMW 335i Sedan [8.66]	Just requested access to the spreadsheet.
	Appreciate 0 Quote

02-19-2011, 10:15 AM	#1472
NiVeDh Major General 426 Rep 8,003 Posts Drives: '08 E90 335i, '99 E36 M3 Join Date: Apr 2009 Location: Houston, TX & Atlanta, GA iTrader: (132) Garage List 2008 BMW 335i Sedan [8.66]	To disable the orange LED on the E92, try these: SIDEMARKER_US_NFRM: nicht_aktiv PO_RL_FKT_MIT_SL_V: nicht_aktiv PWM_SL_V_BEI_AKTIVEN_AL: wert_04 PWM_SL_V_BEI_AKTIVEN_FL: wert_04
	Appreciate 0 Quote