Sockets 335i build

Socket · 05-31-2016, 08:07 AM

Quote:

Originally Posted by NeT335

Nice bro stage 3 pump finally arrived

When you going to install?

Also 'DIPS' on stage 2

Quote:

Originally Posted by tawfeeqh

Nice one socks, stage 3 pumps. I take it PI kit is coming soon too?

Fuel It stage 3 and hobbs switch
Now I have to wait to save up some monies to buy a PI kit so wont be installing for a while yet Nic
I see you ordered a EOS Tawf.... Im jellies

Flex68 · 05-31-2016, 08:46 AM

Quote:

Originally Posted by Socket

Mod 57 - Cashy Diff Lock Down Kit

Lucky enuf to score this DLD kit from CashedUpBogun - aka Cashy (cheers mate)

Even luckier to have the boys at Active, install it for me while checking the new LSD

No doubt this is the best "bang for buck" mod you can do
Totally stabilisers the back end, especially when taking off in full throttle from a stand still

Pic 1 - Boys at Active installing kit
Pic 2 - DLD kit
Pic 3 - Bolted in

Where can I get this from socks ?

tawfeeqh · 05-31-2016, 09:06 AM

lol yeh how funny is that Socket I got one half (PI Kit) and you got the other half (stage 3 pump). I was personally tossing up between the PI kits that sandwhich between the manifold vs the EOS manifold with intergrated injectors then thought for a couple of hundred extra ($300 to be exact) the EOS one is a nicer finish, easier install and eliminates chances of cracks and leaks. Looks great in Ian's engine bay. They had a special going throwing in the AI6 split second controller for free so its a saving of about $500 AUD on that itself.

In terms of stage 3 pump, I haven't got yet as $1500 sound pretty steap for 2x450 walbro pumps in a bucket, though fuelit does package it up nicely with a hobb switch so is a much nicer fitout. For the moment i'll just run less power and see how much my stage 2 fuelit can cope with

Anyways good luck

Socket · 05-31-2016, 09:38 AM

Quote:

Originally Posted by Flex68

Where can I get this from socks ?

Not sure if he is arranging more but PM CashedUpBogan Flex

Socket · 05-31-2016, 09:46 AM

Quote:

Originally Posted by tawfeeqh

lol yeh how funny is that Socket I got one half (PI Kit) and you got the other half (stage 3 pump). I was personally tossing up between the PI kits that sandwhich between the manifold vs the EOS manifold with intergrated injectors then thought for a couple of hundred extra ($300 to be exact) the EOS one is a nicer finish, easier install and eliminates chances of cracks and leaks. Looks great in Ian's engine bay. They had a special going throwing in the AI6 split second controller for free so its a saving of about $500 AUD on that itself.

In terms of stage 3 pump, I haven't got yet as $1500 sound pretty steap for 2x450 walbro pumps in a bucket, though fuelit does package it up nicely with a hobb switch so is a much nicer fitout. For the moment i'll just run less power and see how much my stage 2 fuelit can cope with

Anyways good luck

Have been wanting to get the EOS since Inky dropped one in his car

Fuel it had a group buy running in May that DrJ put me onto, so I splashed out on the stage 3 while the discount was running.
Unfortunately outta money again, so PI will have to wait

tawfeeqh · 05-31-2016, 05:05 PM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by tawfeeqh

lol yeh how funny is that Socket I got one half (PI Kit) and you got the other half (stage 3 pump). I was personally tossing up between the PI kits that sandwhich between the manifold vs the EOS manifold with intergrated injectors then thought for a couple of hundred extra ($300 to be exact) the EOS one is a nicer finish, easier install and eliminates chances of cracks and leaks. Looks great in Ian's engine bay. They had a special going throwing in the AI6 split second controller for free so its a saving of about $500 AUD on that itself.

In terms of stage 3 pump, I haven't got yet as $1500 sound pretty steap for 2x450 walbro pumps in a bucket, though fuelit does package it up nicely with a hobb switch so is a much nicer fitout. For the moment i'll just run less power and see how much my stage 2 fuelit can cope with

Anyways good luck

Have been wanting to get the EOS since Inky dropped one in his car

Fuel it had a group buy running in May that DrJ put me onto, so I splashed out on the stage 3 while the discount was running.
Unfortunately outta money again, so PI will have to wait

Can you PM me how much the GB set you back delivered AUD, just so I have an idea on best case scenario if this GB does return

Thanks

Socket · 06-01-2016, 04:51 AM

Quote:

Originally Posted by tawfeeqh

Can you PM me how much the GB set you back delivered AUD, just so I have an idea on best case scenario if this GB does return

Thanks

$1624 AUD delivered

Zoo Tv · 06-01-2016, 12:50 PM

Quote:

Originally Posted by Socket

$1624 AUD delivered

Fantastic car - love reading the mods. Where will it end up???

https://www.youtube.com/watch?v=HWvIoYm6CJI

Socket · 06-01-2016, 06:24 PM

Quote:

Originally Posted by Zoo Tv

Fantastic car - love reading the mods. Where will it end up???

https://www.youtube.com/watch?v=HWvIoYm6CJI

Thanks so much . Enjoyed watching this episode. Absolute rocket. Owner looked terrified and nearly pulled the Jesus handles out of the headliner haha
Not sure I'll ever make that type of power on twin turbos but I'd be happy with 600 hp. Need to install PI and finish tune then put it on the dyno to see what it will do.. Watch this space

CashedUpBogan · 06-02-2016, 12:14 PM

Quote:

Originally Posted by tawfeeqh

Quote:

Originally Posted by Socket

Quote:

Originally Posted by tawfeeqh

lol yeh how funny is that Socket I got one half (PI Kit) and you got the other half (stage 3 pump). I was personally tossing up between the PI kits that sandwhich between the manifold vs the EOS manifold with intergrated injectors then thought for a couple of hundred extra ($300 to be exact) the EOS one is a nicer finish, easier install and eliminates chances of cracks and leaks. Looks great in Ian's engine bay. They had a special going throwing in the AI6 split second controller for free so its a saving of about $500 AUD on that itself.

In terms of stage 3 pump, I haven't got yet as $1500 sound pretty steap for 2x450 walbro pumps in a bucket, though fuelit does package it up nicely with a hobb switch so is a much nicer fitout. For the moment i'll just run less power and see how much my stage 2 fuelit can cope with

Anyways good luck

Have been wanting to get the EOS since Inky dropped one in his car

Fuel it had a group buy running in May that DrJ put me onto, so I splashed out on the stage 3 while the discount was running.
Unfortunately outta money again, so PI will have to wait

Can you PM me how much the GB set you back delivered AUD, just so I have an idea on best case scenario if this GB does return

Thanks

Hit JD75 up. I got a good price. He can at least price match if not better anything you see online

Socket · 06-04-2016, 11:23 PM

Got rid of the red stripes on the engine cover
Back to stock CF

EB89 · 06-04-2016, 11:31 PM

Looks good, does the dinan looks yellow in person?

Fuji · 06-04-2016, 11:33 PM

Quote:

Originally Posted by Socket

Got rid of the red stripes on the engine cover
Back to stock CF

Significant weight reduction there

vtl · 06-04-2016, 11:46 PM

Quote:

Originally Posted by Socket

Got rid of the red stripes on the engine cover
Back to stock CF

Looks so much better! Wasn't a fan of the red.

Pete.J · 06-04-2016, 11:57 PM

Quote:

Originally Posted by Socket

Mod 57 - Cashy Diff Lock Down Kit

Lucky enuf to score this DLD kit from CashedUpBogun - aka Cashy (cheers mate)

Even luckier to have the boys at Active, install it for me while checking the new LSD

No doubt this is the best "bang for buck" mod you can do
Totally stabilisers the back end, especially when taking off in full throttle from a stand still

Pic 1 - Boys at Active installing kit
Pic 2 - DLD kit
Pic 3 - Bolted in

Wouldn't solid diff bushes achieve a similar effect?

Socket · 06-05-2016, 12:22 AM

Quote:

Originally Posted by EB89

Looks good, does the dinan looks yellow in person?

Yep. Dinan is Kevlar/CF, the Kevlar is a yellow thread

Quote:

Originally Posted by Fuji

Significant weight reduction there

Yep down at least 3g hahaha

Quote:

Originally Posted by vtl

Looks so much better! Wasn't a fan of the red.

Same... agree... took ages to get the stuff off. Used a mild nail polish remover to avoid damaging the CF finish.... mission accomplished

Socket · 06-05-2016, 12:24 AM

Quote:

Originally Posted by pitos_7

Wouldn't solid diff bushes achieve a similar effect?

Hey Pete. Not sure tbh

terminator335i · 06-07-2016, 10:05 AM

Quote:

Originally Posted by Socket

Have been wanting to get the EOS since Inky dropped one in his car

Fuel it had a group buy running in May that DrJ put me onto, so I splashed out on the stage 3 while the discount was running.
Unfortunately outta money again, so PI will have to wait

...

Socket · 06-07-2016, 05:03 PM

Hahaha so true

MMM335 · 06-09-2016, 08:27 AM

Following and taking inspiration!

Socket · 06-09-2016, 08:41 AM

Quote:

Originally Posted by 335gc

Following and taking inspiration!

Socket · 06-09-2016, 08:45 AM

Dropping car back to Active tomorrow to have the LSD replaced.

Replacing it with the proper diff
The shipping paperwork lists it as a "gear type" but I thought these only came in a helical format??

Definitely the right part number MF-TRS-05E46A and seems to match the photos on the MF website, so might be a Taiwanese typo

Hopefully will get rid of the wheel lock at low speeds and the vibration at high speeds.

Will let you know when I pick it up in a week or so

05-31-2016, 09:06 AM	#1543
tawfeeqh Major 166 Rep 1,175 Posts Drives: 2007 BMW e90 335i Join Date: Jun 2015 Location: Melbourne, Australia iTrader: (0)	lol yeh how funny is that Socket I got one half (PI Kit) and you got the other half (stage 3 pump). I was personally tossing up between the PI kits that sandwhich between the manifold vs the EOS manifold with intergrated injectors then thought for a couple of hundred extra ($300 to be exact) the EOS one is a nicer finish, easier install and eliminates chances of cracks and leaks. Looks great in Ian's engine bay. They had a special going throwing in the AI6 split second controller for free so its a saving of about $500 AUD on that itself. In terms of stage 3 pump, I haven't got yet as $1500 sound pretty steap for 2x450 walbro pumps in a bucket, though fuelit does package it up nicely with a hobb switch so is a much nicer fitout. For the moment i'll just run less power and see how much my stage 2 fuelit can cope with Anyways good luck
	Appreciate 0 Quote

06-04-2016, 11:23 PM	#1551
Socket Lieutenant General 4720 Rep 11,971 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Got rid of the red stripes on the engine cover Back to stock CF Attached Images
	Appreciate 0 Quote

06-04-2016, 11:31 PM	#1552
EB89 Brigadier General 550 Rep 3,127 Posts Drives: 2011 335i e92 DCT Join Date: Sep 2015 Location: Australia, NSW iTrader: (0) Garage List 2011 BMW 335i e92 [0.00]	Looks good, does the dinan looks yellow in person?
	Appreciate 0 Quote

06-07-2016, 05:03 PM	#1559
Socket Lieutenant General 4720 Rep 11,971 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Hahaha so true
	Appreciate 0 Quote

06-09-2016, 08:27 AM	#1560
MMM335 Lieutenant 94 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	Following and taking inspiration!
	Appreciate 0 Quote

06-09-2016, 08:45 AM	#1562
Socket Lieutenant General 4720 Rep 11,971 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Dropping car back to Active tomorrow to have the LSD replaced. Replacing it with the proper diff The shipping paperwork lists it as a "gear type" but I thought these only came in a helical format?? Definitely the right part number MF-TRS-05E46A and seems to match the photos on the MF website, so might be a Taiwanese typo Hopefully will get rid of the wheel lock at low speeds and the vibration at high speeds. Will let you know when I pick it up in a week or so Attached Images Last edited by Socket; 06-09-2016 at 08:58 AM..
	Appreciate 0 Quote