[pwr hungry]

I did the trim on my e92. It's not that fun, easy to put stretch marks in and a pain in the dick to take off once it starts to show age. I'm redoing mine with plastidip after I finish removing the vinyl. Btw, I'm over in maineville. SG e92 with M3 front, sides, wheels and a big ass turbo! Haha

[Patel511]

Originally Posted by thompsac25

Yeah I think it totally changes the look of the car. I convinced my buddy to buy gloss black kidneys on his e92 M3, and it looks so much nicer.

I emailed Spade Kreations to see how much they would vinyl the window trim, but they havent gotten back to me. Guess they dont want my business? Anyone else know of any local shops will do vinyl?

I go to Turn In Concepts, they did my walnut blasting, and DCI install. I don't know about the vinyl trim but I will ask. They recently relocated to a bigger garage near rookwood.

On a side note the funniest thing happened today, I left for work around 1 PM and was in a hurry so I pushed the car a little bit and all of a sudden I see something fly off from the front of my car, I figured it was debris. When I got to work and looked at the car the roundel on the hood was gone...

[thompsac25]

Originally Posted by pwr hungry

I did the trim on my e92. It's not that fun, easy to put stretch marks in and a pain in the dick to take off once it starts to show age. I'm redoing mine with plastidip after I finish removing the vinyl. Btw, I'm over in maineville. SG e92 with M3 front, sides, wheels and a big ass turbo! Haha

Do you work somewhere over in Blue Ash or Sharonville? I've seen an e92 with M3 front and wheels several times in that area...

[thompsac25]

Originally Posted by Patel511

I go to Turn In Concepts, they did my walnut blasting, and DCI install. I don't know about the vinyl trim but I will ask. They recently relocated to a bigger garage near rookwood.

On a side note the funniest thing happened today, I left for work around 1 PM and was in a hurry so I pushed the car a little bit and all of a sudden I see something fly off from the front of my car, I figured it was debris. When I got to work and looked at the car the roundel on the hood was gone...

Nice...TurnIn is doing a ton of 335's lately. I have a few buddies who have taken their cars there. A guy I work with has his MazdaSpeed6 there for an engine rebuild. I havent seen their new facility yet but heard it was nice! I doubt they do vinyl...doesnt seem like their specialty. I may check around at a few tint shops. My buddy (who has an e92 M3) got his windows tinted from "Shades" in Fairfield - the owner used to work at Spade back when their window tinting was good, so he did an EXCELLENT job on my friends car. I'm going to see if he'll vinyl wrap my trim.

[pwr hungry]

Originally Posted by thompsac25

Do you work somewhere over in Blue Ash or Sharonville? I've seen an e92 with M3 front and wheels several times in that area...

I work at GE in Evendale and I have some family in Blue Ash. There is a guy somewhere in the plant here that has an SG e92 M3 though. So, you've maybe seen him as well.

[pwr hungry]

Originally Posted by thompsac25

Nice...TurnIn is doing a ton of 335's lately. I have a few buddies who have taken their cars there. A guy I work with has his MazdaSpeed6 there for an engine rebuild. I havent seen their new facility yet but heard it was nice! I doubt they do vinyl...doesnt seem like their specialty. I may check around at a few tint shops. My buddy (who has an e92 M3) got his windows tinted from "Shades" in Fairfield - the owner used to work at Spade back when their window tinting was good, so he did an EXCELLENT job on my friends car. I'm going to see if he'll vinyl wrap my trim.

Do you think you could grab a couple picks of the tint on his rear window? I'd love to have mine redone. The rear looks like sh*t and the back lower edges on the front sides are starting to peel. :/

[thompsac25]

Originally Posted by pwr hungry

I work at GE in Evendale and I have some family in Blue Ash. There is a guy somewhere in the plant here that has an SG e92 M3 though. So, you've maybe seen him as well.

I thought it was an M3 at first but I've seen it several times and realized it was a 335 with an M front. This was probably 6 months ago and I had my old car (stanced blue g35 coupe in case you ever saw me).

Originally Posted by pwr hungry

Do you think you could grab a couple picks of the tint on his rear window? I'd love to have mine redone. The rear looks like sh*t and the back lower edges on the front sides are starting to peel. :/

Yeah, next time I see him I'll try to take a pic of the tint. It was more expensive than many other tint shops, but its flawless. I've had 3 of my cars tinted at Spade Kreations over the years and have buddies who have gone there recently (in the past 2 years) and the tint jobs are REALLY bad. Then I found out that the guy who owns Shades in Fairfield used to be Spade's main tint guy.

[Sandman614]

SPOTTED: (sorry no pics)

Blue 335is tonight at 1000 Polaris Parkway here in Columbus
Looked like it had a black grill, Ohio plates

Really hoping this is an e90post member

[The Die]

You saw yourself in Polaris?

[Sandman614]

Originally Posted by The Die

You saw yourself in Polaris?

saw my younger, slightly more athletic looking, brother

[schach23]

Can anyone recommend a remote start installer in the Akron Area? Thanks

Scott

[David1]

Originally Posted by schach23

Can anyone recommend a remote start installer in the Akron Area? Thanks

Scott

Do not install one.......fair warning you also loose full electronic warranty on the car once installed. It is a vary invasive/hacking install if the installer even gets it right.

[schach23]

Actually was wondering for another car, not my 335.

Scott

[David1]

Originally Posted by schach23

Actually was wondering for another car, not my 335.

Scott

That's good! Keep in mind that most of the aftermarket remote start stuff is junk.

[M2M2M2]

Anyone with a 335 have the BMW Performance exhaust? I would love to hear it in person before pulling the trigger.

or the VRSF exhaust.

[Turn In Concepts]

Hey guys. We don't post in here often, but have been getting quite a few requests from people lately for work on 335's so I figured I would come in a say a few words.

We did recently relocate to a new facility. We have a 15000 sqft building now that is right on 71 about a mile north of Rookwood. We do everything from basic maintenance to race preparation and have an AWD dyno on which we will soon be offering custom tuning for the 335 platform.

Here's a short video of our new shop space from our preview day we had a couple months ago.

If there are any questions you guys have please let us know. We have been working on these cars now for about 4 years and have a lot of knowledge into how to make them fast and live problem free lives.

Tony

[thompsac25]

Originally Posted by Turn In Concepts

Hey guys. We don't post in here often, but have been getting quite a few requests from people lately for work on 335's so I figured I would come in a say a few words.

We did recently relocate to a new facility. We have a 15000 sqft building now that is right on 71 about a mile north of Rookwood. We do everything from basic maintenance to race preparation and have an AWD dyno on which we will soon be offering custom tuning for the 335 platform.

Here's a short video of our new shop space from our preview day we had a couple months ago.

If there are any questions you guys have please let us know. We have been working on these cars now for about 4 years and have a lot of knowledge into how to make them fast and live problem free lives.

Tony

Tony,

You guys have worked on several of my buddies' cars - you are currently working on a friend's Mazdaspeed 6.

How much do you charge for walnut blasting? How long does it take?

Thanks,
Adam

[thompsac25]

Originally Posted by Asiana Jones

Anyone with a 335 have the BMW Performance exhaust? I would love to hear it in person before pulling the trigger.

or the VRSF exhaust.

Would like to hear the VRSF exhaust as well. I'm contemplating pulling the trigger on one, but I keep reading about bad fitment issues.

[Turn In Concepts]

Originally Posted by thompsac25

Tony,

You guys have worked on several of my buddies' cars - you are currently working on a friend's Mazdaspeed 6.

How much do you charge for walnut blasting? How long does it take?

Thanks,
Adam

I will shoot you a PM.

[strobe89]

Originally Posted by Asiana Jones

Anyone with a 335 have the BMW Performance exhaust? I would love to hear it in person before pulling the trigger.

or the VRSF exhaust.

I have the N54 with the PE and stock downpipe/cats on it in Dayton. I'd be willing to meet up somewhere so you can hear it. I'm also running the aFe dual cone intake and Cobb with PTF eTune. Shoot me a PM.

[SUHleen]

Originally Posted by LaVerita

SPOTTED: (sorry no pics)

Blue 335is tonight at 1000 Polaris Parkway here in Columbus
Looked like it had a black grill, Ohio plates

Really hoping this is an e90post member

It's not me but I would like to know. I'm on the east side of Columbus and have a '11 Space Gray 335is.

We need to get together for a C-bus meet!

[EricP3]

Originally Posted by thompsac25

Yeah I think it totally changes the look of the car. I convinced my buddy to buy gloss black kidneys on his e92 M3, and it looks so much nicer.

I emailed Spade Kreations to see how much they would vinyl the window trim, but they havent gotten back to me. Guess they dont want my business? Anyone else know of any local shops will do vinyl?

I don't know how I never see you guys. I live down in Mt Adams but I'm up at my parents in Kings right off of Western Row almost every weekend. I play golf at Crooked Tree alot. White e92 with aero lip, gunmetal vmr710s(summer only) and cobb tune. Maybe we should all meet up sometime?