Inexpensive upgraded shock mounts - Monroe 907984

ChiDiddy · 07-21-2016, 04:49 AM

So if I'm getting new shocks (bilstein b12 kit) for the front, would the Monroes front struts work it it? 335d...

DrewWphoto · 07-22-2016, 11:46 AM

Subscribed

Camman · 07-27-2016, 11:06 AM

Just ordered these to go with my BC Racing Coilovers I also ordered. Looks like they are a good purchase for when doing a suspension refresh.

1QuikWS6 · 08-04-2016, 05:41 AM

Found these hella Rear Lower Shock Mounts from AKG Performance while searching

They have them with Poly replaceable bushings:

https://www.akgmotorsport.com/produc...hings-e8x-e9x/

And Spherical Bearings:

https://www.akgmotorsport.com/produc...e9x-spherical/

They also carry the Poly Upper Bushings in both 85A/95A durometer

https://www.akgmotorsport.com/produc...y-85a-e8x-e9x/

https://www.akgmotorsport.com/produc...a-e8x-and-e9x/

feuer · 08-04-2016, 11:01 AM

Quote:

Originally Posted by 1QuikWS6

Found these hella Rear Lower Shock Mounts from AKG Performance while searching

They have them with Poly replaceable bushings:

https://www.akgmotorsport.com/produc...hings-e8x-e9x/

And Spherical Bearings:

https://www.akgmotorsport.com/produc...e9x-spherical/

They also carry the Poly Upper Bushings in both 85A/95A durometer

https://www.akgmotorsport.com/produc...y-85a-e8x-e9x/

https://www.akgmotorsport.com/produc...a-e8x-and-e9x/

Those are new. Justpete posted them recently.
http://www.e90post.com/forums/showpo...35&postcount=2

Wifeys335i · 08-06-2016, 02:23 PM

Pepboys have these in stock and you get 25% off. I just ordered both the 907984 and 907985 for $39.71. I'm doing a refresh kit for the my e90 and ordered the following items:

2 Front upper strut mounts (31306775098)
2 Shock Mount Sealing (33506767010)
2 Rear bump stop support cup (33526764418)

Is there anything else I need?

The Nightman · 10-05-2016, 11:47 AM

Sorry to bump an old thread but I recently installed the Monroe upper mounts and have noticed more noises from the rear. It sounds like minor thudding when going over bumps. Has anyone else experienced this?

I've checked that the top mount nuts were tight. I did not remove the shocks from the lower position during installation. I used the black Monroe washers instead of the silver OE "cups" if it matters.

phubar · 10-06-2016, 05:44 PM

Quote:

Originally Posted by freedomfries

I used the black Monroe washers instead of the silver OE "cups" if it matters.

That's probably the problem, I used both if I remember correctly, cup then black washer.

The Nightman · 10-07-2016, 12:18 PM

Quote:

Originally Posted by phubar

That's probably the problem, I used both if I remember correctly, cup then black washer.

The noises have subsided and I think I can attribute the remaining increase in NVH to the use of the stiffer mounts with RFTs. Aside from that, the rear does feel firmer and more planted. Not sure if it's worth the NVH on a daily though.

Stupenal · 11-28-2016, 04:22 PM

FYI - pepboys cyber monday sale takes 35% off.

Got the rear upper mounts - Pickup in store for $14.87, including CA tax.

feuer · 11-28-2016, 04:43 PM

Quote:

Originally Posted by freedomfries

Sorry to bump an old thread but I recently installed the Monroe upper mounts and have noticed more noises from the rear. It sounds like minor thudding when going over bumps. Has anyone else experienced this?

Well that's good, they work as designed. If you have RFT noise would not be pleasant.

mob17 · 12-04-2016, 05:31 PM

Quote:

Originally Posted by feuer

Quote:

Originally Posted by freedomfries

Sorry to bump an old thread but I recently installed the Monroe upper mounts and have noticed more noises from the rear. It sounds like minor thudding when going over bumps. Has anyone else experienced this?

Well that's good, they work as designed. If you have RFT noise would not be pleasant.

So ive recevied the top mounts. What instructions should i give to my installer, read a few different opinions on the monroe washer and oem one.

feuer · 12-04-2016, 08:52 PM

Quote:

Originally Posted by mob17

So ive recevied the top mounts. What instructions should i give to my installer, read a few different opinions on the monroe washer and oem one.

I didn't reuse the oem washer. It was worn out. Other have used it in conjunction with the new monroe washer. That shortens the shaft travel by few mm. Is up to you really.

I keep thinking of that tq on your 335d. You could pull lory trailer with it.

tdavis42 · 12-04-2016, 10:58 PM

Quote:

Originally Posted by feuer

I didn't reuse the oem washer. It was worn out. Other have used it in conjunction with the new monroe washer. That shortens the shaft travel by few mm. Is up to you really.

I keep thinking of that tq on your 335d. You could pull lory trailer with it.

When replacing this part do you just need to take the load off the shock to unbolt this part and replace? I know people say it's easy but I'm not 100% sure on install instructions for our cars. Any help would be appreciated.

mob17 · 12-05-2016, 05:19 AM

Quote:

Originally Posted by feuer

Quote:

Originally Posted by mob17

So ive recevied the top mounts. What instructions should i give to my installer, read a few different opinions on the monroe washer and oem one.

I didn't reuse the oem washer. It was worn out. Other have used it in conjunction with the new monroe washer. That shortens the shaft travel by few mm. Is up to you really.

I keep thinking of that tq on your 335d. You could pull lory trailer with it.

Ok thanks. Will get these fitted this Thursday.

Not sure if it can pull a lorry! Not towed anything with this, would be good to see how it does.

mob17 · 12-09-2016, 06:25 AM

Got these fitted today. Straight away noticed its more solid at the back. Think its taken some of the shimmy away too but will have to drive a bit more to find out

cdgatti · 12-11-2016, 07:20 AM

When I first installed mine I noticed slightly more noise/vibration or at least imagined I did! After a few days it either went away or I stopped imagining it. Have had them on for over a year and the one thing that I really notice is that very annoying 2nd oscillation when coming to a complete quick stop has been and has stayed eliminated with these harder rubber monroe units compared to the stock foam units. Great cheap upgrade.

SHEEDI · 03-24-2017, 01:00 PM

digging old thread, how long I should wait for shocks/struts to go bad before replacing them? I don't want to pay $200 for rear upper/lower bushing installation

feuer · 03-24-2017, 01:18 PM

Quote:

Originally Posted by SHEEDI

digging old thread, how long I should wait for shocks/struts to go bad before replacing them? I don't want to pay $200 for rear upper/lower bushing installation

Your is 2009 New York car that has seen harsh winter and poor roads. If you are past 75k you definitely need new struts and shocks.

SHEEDI · 03-24-2017, 02:36 PM

Quote:

Originally Posted by feuer

Your is 2009 New York car that has seen harsh winter and poor roads. If you are past 75k you definitely need new struts and shocks.

Thanks for input, I drive it on weekends only and it has only 56k on it.
so I guess I have to wait.

6ixSpd · 04-02-2017, 11:34 PM

Quick question: does that black metal washer sit between the OEM metal cup that houses the bumpstop, and the inner Monroe mount (the one that goes UNDER the unibody)? Obviously the outer Monroe mount goes in the trunk.

EDIT:NVM, I found the answer.

SHEEDI · 04-06-2017, 08:13 AM

do we need to do alignment done after installing upper and lower mounts?

07-21-2016, 04:49 AM	#155
ChiDiddy 50 19 Rep 230 Posts Drives: pop smoke Join Date: Jan 2009 Location: Houston iTrader: (0)	So if I'm getting new shocks (bilstein b12 kit) for the front, would the Monroes front struts work it it? 335d...
	Appreciate 0 Quote

07-22-2016, 11:46 AM	#156
DrewWphoto Private First Class 29 Rep 185 Posts Drives: 2017 WRX Join Date: Jul 2015 Location: Philadelphia iTrader: (0)	Subscribed
	Appreciate 0 Quote

07-27-2016, 11:06 AM	#157
Camman What am I doing here? 195 Rep 463 Posts Drives: 07 328i 6MT Join Date: Sep 2013 Location: Houston iTrader: (0)	Just ordered these to go with my BC Racing Coilovers I also ordered. Looks like they are a good purchase for when doing a suspension refresh. __________________ N52 : 6MT : ZSP : ZPP : BC Racing Coilovers : BMW PE
	Appreciate 0 Quote

08-04-2016, 05:41 AM	#158
1QuikWS6 No 55mph 1627 Rep 8,495 Posts Drives: F32 435ix MSport Join Date: Jul 2009 Location: Blitzburgh, PA iTrader: (113) Garage List 2022 BMW M440ix Vert [0.00] 2015 BMW 435ix MSport [0.00] 2000 Pontiac Trans Am [0.00]	Found these hella Rear Lower Shock Mounts from AKG Performance while searching They have them with Poly replaceable bushings: https://www.akgmotorsport.com/produc...hings-e8x-e9x/ And Spherical Bearings: https://www.akgmotorsport.com/produc...e9x-spherical/ They also carry the Poly Upper Bushings in both 85A/95A durometer https://www.akgmotorsport.com/produc...y-85a-e8x-e9x/ https://www.akgmotorsport.com/produc...a-e8x-and-e9x/ __________________ F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
	Appreciate 2 feuer4287.50 lab_rat396.50 Quote

08-06-2016, 02:23 PM	#160
Wifeys335i Private First Class 48 Rep 182 Posts Drives: E90 335 Join Date: Oct 2009 Location: South Florida iTrader: (0)	Pepboys have these in stock and you get 25% off. I just ordered both the 907984 and 907985 for $39.71. I'm doing a refresh kit for the my e90 and ordered the following items: 2 Front upper strut mounts (31306775098) 2 Shock Mount Sealing (33506767010) 2 Rear bump stop support cup (33526764418) Is there anything else I need?
	Appreciate 1 feuer4287.50 Quote

10-05-2016, 11:47 AM	#161
The Nightman Cometh 1236 Rep 1,408 Posts Drives: Boy's Soul Join Date: Jul 2016 Location: Boy's Hole iTrader: (4) Garage List E90 LCI "330i& ... [10.00]	Sorry to bump an old thread but I recently installed the Monroe upper mounts and have noticed more noises from the rear. It sounds like minor thudding when going over bumps. Has anyone else experienced this? I've checked that the top mount nuts were tight. I did not remove the shocks from the lower position during installation. I used the black Monroe washers instead of the silver OE "cups" if it matters.
	Appreciate 0 Quote

11-28-2016, 04:22 PM	#164
Stupenal First Lieutenant 46 Rep 347 Posts Drives: Mmm Join Date: May 2009 Location: Socal iTrader: (10)	FYI - pepboys cyber monday sale takes 35% off. Got the rear upper mounts - Pickup in store for $14.87, including CA tax.
	Appreciate 1 mantis278.00 Quote

12-09-2016, 06:25 AM	#170
mob17 Major General 395 Rep 5,612 Posts Drives: E92 335D Join Date: Mar 2012 Location: East Midlands, UK iTrader: (5)	Got these fitted today. Straight away noticed its more solid at the back. Think its taken some of the shimmy away too but will have to drive a bit more to find out
	Appreciate 0 Quote

12-11-2016, 07:20 AM	#171
cdgatti Colonel 260 Rep 2,547 Posts Drives: e90 328i Join Date: May 2011 Location: KY iTrader: (4)	When I first installed mine I noticed slightly more noise/vibration or at least imagined I did! After a few days it either went away or I stopped imagining it. Have had them on for over a year and the one thing that I really notice is that very annoying 2nd oscillation when coming to a complete quick stop has been and has stayed eliminated with these harder rubber monroe units compared to the stock foam units. Great cheap upgrade. __________________ OEM Black grill and Blackline tails - LCI halogens with Lux V2 coded as DRL - 3M Crystalline - BMS PBX - OEM Euro Airbox with K&N - Hardwired CTEK - Bilstein B6 w/OEM springs and SP perches - Conti DWS06 - HiFi-Helix DSP - JLAudio HD/XD-Morel - CD changer trim - AE optical out
	Appreciate 0 Quote

03-24-2017, 01:00 PM	#172
SHEEDI Banned 607 Rep 2,703 Posts Drives: 2009 335i - Sport PKG Join Date: Jun 2009 Location: NY iTrader: (0) Garage List 2009 BMW 335i [8.50]	digging old thread, how long I should wait for shocks/struts to go bad before replacing them? I don't want to pay $200 for rear upper/lower bushing installation
	Appreciate 0 Quote

04-02-2017, 11:34 PM	#175
6ixSpd Save the manuals! 6066 Rep 6,760 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	Quick question: does that black metal washer sit between the OEM metal cup that houses the bumpstop, and the inner Monroe mount (the one that goes UNDER the unibody)? Obviously the outer Monroe mount goes in the trunk. EDIT:NVM, I found the answer. __________________ '16 M3 \| '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc
	Appreciate 1 feuer4287.50 Quote

04-06-2017, 08:13 AM	#176
SHEEDI Banned 607 Rep 2,703 Posts Drives: 2009 335i - Sport PKG Join Date: Jun 2009 Location: NY iTrader: (0) Garage List 2009 BMW 335i [8.50]	do we need to do alignment done after installing upper and lower mounts?
	Appreciate 0 Quote