Hexon RR600's arrived and installed!

BQTuning · 02-14-2016, 12:10 PM

Quote:

Originally Posted by sirdaft1

Is that with Meth or E85?

No meth, just E50 fuel

Msport335 · 02-14-2016, 12:42 PM

no inlets on either of these cars?

Kienvu14 · 02-14-2016, 12:45 PM

Quote:

Originally Posted by Msport335

no inlets on either of these cars?

Look at the first post.....they have inlets

Grand_hustle17 · 02-14-2016, 01:53 PM

Wish my hpfp was that healthy lol

ibnd335i · 02-15-2016, 05:05 PM

My entire fuel system is new with a stage 2 lpfp cant wait to get these 700s on and push the limits lol

mwahlert · 03-09-2016, 03:29 PM

I am really wondering what is possible on 93 with RR600's, stock inlets. I have an opportunity to have my turbos swapped out and am thinking about putting the RR600's in, but don't plan on going nuts with the car otherwise.

Mods would be limited to DCI or similar intake
CL downpipes
small FMIC (something like vrsf 5", or mishimoto)
RR600's
maybe a LPFP if needed

car has fresh coils, plugs, injectors, HPFP.

i'd be happy with 450whp on that setup, i think.

Thacuda · 03-11-2016, 08:11 AM

Anyone have experience regarding when they received turbos vs when the install /gasket kit came? Turbos have arrived, just no kit

f3adm · 03-11-2016, 08:36 AM

Quote:

Originally Posted by Thacuda

Anyone have experience regarding when they received turbos vs when the install /gasket kit came? Turbos have arrived, just no kit

My kit came a week later, comes from the states.

jcarv20s · 03-11-2016, 10:27 AM

Quote:

Originally Posted by mwahlert

I am really wondering what is possible on 93 with RR600's, stock inlets. I have an opportunity to have my turbos swapped out and am thinking about putting the RR600's in, but don't plan on going nuts with the car otherwise.

Mods would be limited to DCI or similar intake
CL downpipes
small FMIC (something like vrsf 5", or mishimoto)
RR600's
maybe a LPFP if needed

car has fresh coils, plugs, injectors, HPFP.

i'd be happy with 450whp on that setup, i think.

We are on the same boat. I'm in the need for turbos, been looking at the RR600's. My goal is 450whp with the following support mods:

VRSF 7" FMIC
VRSF DPs
Burger DCI's
Upper and Lower CP's

Current EM Cobb V2.

Does the Hybrid 2 RR600 kit come with everything I need? http://www.hexonautowerks.com/produc...?pg=&PdSearch=

+ the BMW Genuine Installation kit of course.

Also, I can't find a benefit to the Hexon inlets, is it just relocation? JW.

Happy Friday!

Sean978 · 03-11-2016, 12:28 PM

If I had to do it all over again I would have just sourced the gaskets (BMW install kit) seperately... you can save some bucks there for sure. My install kit did come in before my turbos though, about 2 or 3 days.

OB · 03-12-2016, 12:01 PM

Quote:

Originally Posted by jcarv20s

We are on the same boat. I'm in the need for turbos, been looking at the RR600's. My goal is 450whp with the following support mods:

VRSF 7" FMIC
VRSF DPs
Burger DCI's
Upper and Lower CP's

Current EM Cobb V2.

Does the Hybrid 2 RR600 kit come with everything I need? http://www.hexonautowerks.com/produc...?pg=&PdSearch=

+ the BMW Genuine Installation kit of course.

Also, I can't find a benefit to the Hexon inlets, is it just relocation? JW.

Happy Friday!

Aluminum instead of silicon (heat perspective), bracket to secure the front inlet from contact with pulley - other silicon inlets with stock location needs to be zip tied to the fan shroud.

Whit45 · 03-13-2016, 11:52 AM

Just opened up my pkg. from hexon, I've had it for about a month now. Guess what, no install kit; wow! Glad I haven't been in a hurry...lol

Whit45 · 03-13-2016, 11:55 AM

How much can you save by sourcing the parts locally?

CalmLikeABomb · 03-13-2016, 12:25 PM

Quote:

Originally Posted by Kienvu14

537hp and 548tq. Sorry I can't open the file up on my phone so a picture of it will do for now until I can get home.

super stoked about the power!

Congrats! 21 PSI??

my friend with RB's 15t turbos made 565hp and 590 tq on a heartbreak dyno. dynojet numbers are close to 600whp with the same mods but he runs 25-26 psi with e60 and TBI to help the HPFP. You have more room for power!!!

Chris@BoostConcepts · 03-25-2016, 11:43 PM

OP, wow, nice numbers for 21 PSI!! very impressive, how is it to drive? what are your impressions of spool and top end power?

Chris

Welterweight · 03-26-2016, 07:31 PM

Dropped the car off today for RR600 install. Mechanic asked if the turbo seals were in the install kit or turbo box. I was unsure. Anyone know the answer? Thanks!

altostratus · 03-26-2016, 07:44 PM

Mine goes in Tuesday for 600's and VTT outlets. Should be great

Chris@BoostConcepts · 03-26-2016, 07:49 PM

Quote:

Originally Posted by Welterweight

Dropped the car off today for RR600 install. Mechanic asked if the turbo seals were in the install kit or turbo box. I was unsure. Anyone know the answer? Thanks!

Should be in the install kit!!

Chris

Welterweight · 03-26-2016, 09:32 PM

Quote:

Originally Posted by Chris@BoostConcepts

Should be in the install kit!!

Chris

Thanks brotha!

I also have the silicon inlets and BMS 3.5 bar TMAP!

Chris@BoostConcepts · 03-26-2016, 09:44 PM

Nice!! Sounds like you will be making some nice power soon, bet you are pretty excited... I love that feeling when you start crossing items off your build list and are getting ready for the installation.. Good stuff!!

Welterweight · 03-26-2016, 09:58 PM

So pumped man! I'm an adrenaline junky. I have a corporate job but also do cage fighting as a hobby and of course drive way too fast!!!!!

Chris@BoostConcepts · 03-26-2016, 10:06 PM

Sounds like it..hahaha.. Fightclub meets fast and furious... Sounds like you have your outlets covered in spades!! Let is know how the cars feels when you get it back!! Fun to read people's impressions after a significant power transformation!!

02-14-2016, 12:42 PM	#156
Msport335 Captain 99 Rep 804 Posts Drives: 2009 335i m-sport e90 Join Date: May 2013 Location: Burlington iTrader: (0)	no inlets on either of these cars? __________________ E90 LCI M-sport/ 6AT/ LSD/ FBO+
	Appreciate 0 Quote

02-14-2016, 01:53 PM	#158
Grand_hustle17 Major 194 Rep 1,173 Posts Drives: E90 335i Join Date: Aug 2015 Location: Maryland iTrader: (0)	Wish my hpfp was that healthy lol
	Appreciate 0 Quote

02-15-2016, 05:05 PM	#159
ibnd335i New Member 0 Rep 8 Posts Drives: 2007 e92 335i Join Date: May 2014 Location: Tampa, FL iTrader: (0)	My entire fuel system is new with a stage 2 lpfp cant wait to get these 700s on and push the limits lol
	Appreciate 0 Quote

03-09-2016, 03:29 PM	#160
mwahlert Lieutenant Colonel 97 Rep 1,659 Posts Drives: 2009 335i Join Date: Apr 2008 Location: NC iTrader: (8)	I am really wondering what is possible on 93 with RR600's, stock inlets. I have an opportunity to have my turbos swapped out and am thinking about putting the RR600's in, but don't plan on going nuts with the car otherwise. Mods would be limited to DCI or similar intake CL downpipes small FMIC (something like vrsf 5", or mishimoto) RR600's maybe a LPFP if needed car has fresh coils, plugs, injectors, HPFP. i'd be happy with 450whp on that setup, i think.
	Appreciate 0 Quote

03-11-2016, 08:11 AM	#161
Thacuda New Member 2 Rep 24 Posts Drives: 2007 335 Join Date: Sep 2015 Location: Charlotte, NC iTrader: (0)	Anyone have experience regarding when they received turbos vs when the install /gasket kit came? Turbos have arrived, just no kit
	Appreciate 0 Quote

03-11-2016, 12:28 PM	#164
Sean978 Private First Class 35 Rep 120 Posts Drives: 2007 335i 6MT SGM Join Date: Jan 2014 Location: Nashua, NH iTrader: (0)	If I had to do it all over again I would have just sourced the gaskets (BMW install kit) seperately... you can save some bucks there for sure. My install kit did come in before my turbos though, about 2 or 3 days.
	Appreciate 0 Quote

03-13-2016, 11:52 AM	#166
Whit45 Second Lieutenant 40 Rep 228 Posts Drives: '08 E90 335i/'10 E92 M3/'13 Is Join Date: Apr 2014 Location: NC The curvy side iTrader: (0)	Just opened up my pkg. from hexon, I've had it for about a month now. Guess what, no install kit; wow! Glad I haven't been in a hurry...lol
	Appreciate 0 Quote

03-13-2016, 11:55 AM	#167
Whit45 Second Lieutenant 40 Rep 228 Posts Drives: '08 E90 335i/'10 E92 M3/'13 Is Join Date: Apr 2014 Location: NC The curvy side iTrader: (0)	How much can you save by sourcing the parts locally?
	Appreciate 0 Quote

03-25-2016, 11:43 PM	#169
Chris@BoostConcepts 172 Rep 312 Posts Drives: 2008 BMW 135i, 2007 335i e92 Join Date: Jun 2013 Location: Wilmington, NC iTrader: (2)	OP, wow, nice numbers for 21 PSI!! very impressive, how is it to drive? what are your impressions of spool and top end power? Chris
	Appreciate 0 Quote

03-26-2016, 07:31 PM	#170
Welterweight Major 100 Rep 1,337 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Dropped the car off today for RR600 install. Mechanic asked if the turbo seals were in the install kit or turbo box. I was unsure. Anyone know the answer? Thanks!
	Appreciate 0 Quote

03-26-2016, 07:44 PM	#171
altostratus Private First Class 9 Rep 106 Posts Drives: 09 335xi sedan Join Date: Aug 2014 Location: Toronto iTrader: (0)	Mine goes in Tuesday for 600's and VTT outlets. Should be great
	Appreciate 0 Quote

03-26-2016, 09:44 PM	#174
Chris@BoostConcepts 172 Rep 312 Posts Drives: 2008 BMW 135i, 2007 335i e92 Join Date: Jun 2013 Location: Wilmington, NC iTrader: (2)	Nice!! Sounds like you will be making some nice power soon, bet you are pretty excited... I love that feeling when you start crossing items off your build list and are getting ready for the installation.. Good stuff!!
	Appreciate 0 Quote

03-26-2016, 09:58 PM	#175
Welterweight Major 100 Rep 1,337 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	So pumped man! I'm an adrenaline junky. I have a corporate job but also do cage fighting as a hobby and of course drive way too fast!!!!!
	Appreciate 0 Quote

03-26-2016, 10:06 PM	#176
Chris@BoostConcepts 172 Rep 312 Posts Drives: 2008 BMW 135i, 2007 335i e92 Join Date: Jun 2013 Location: Wilmington, NC iTrader: (2)	Sounds like it..hahaha.. Fightclub meets fast and furious... Sounds like you have your outlets covered in spades!! Let is know how the cars feels when you get it back!! Fun to read people's impressions after a significant power transformation!! Last edited by Chris@BoostConcepts; 03-27-2016 at 10:03 PM..
	Appreciate 0 Quote