[XrayMan]

E93 spoiler in the works??

[jaceaholic]

no pictures up yet??? HmmmMMm...

[adamaster]

Customer picture
E92 VSR Style CFRP Painted AW Aero Deck Lid Spoiler

[PIMPIN THE E92]

looks good! mine is on its way!

[dvpouldar26]

Can you post up pics of the underside of the Vorsteiner tyle spoiler to show where we have to apply the double sided tape? Also, is removing the badges and roundel necessary to install the spoiler?

[Queenskid24]

Originally Posted by PIMPIN THE E92

looks good! mine is on its way!

lucky.....mine should be leaving soon

[QUOTE=dvpouldar26;3649750]Can you post up pics of the underside of the Vorsteiner tyle spoiler to show where we have to apply the double sided tape? Also, is removing the badges and roundel necessary to install the spoiler?[/QUOTE]

yes. and id also be interested in seeing where we should apply the 3m tape.

[Nypeder]

Originally Posted by Queenskid24

lucky.....mine should be leaving soon

you gotta stop by the westburry meet when you install this

[Kit523]

did u guys notice there is no 2 holes for the emblems?
drilling a painted fiberglass is not good
so maybe the best idea is to cut off the 2 things behind the emblems and use 3m to put it on

[pdjafari]

Originally Posted by Kit523

did u guys notice there is no 2 holes for the emblems?
drilling a painted fiberglass is not good
so maybe the best idea is to cut off the 2 things behind the emblems and use 3m to put it on

Let me mention one thing. The body shop which did my authentic PUR decklid, removed my OEM roundel from the trunk and attached it on the VOR decklid with 3m tape as well as drilled 2 holes for those small nothces which get inserted. When I removed my VOR decklid to sell it, I had to then remove the roundel again and replace it back on my OEM trunk. I was unable to get the roundel to sit inside teh oem holes w/o using 3m tape. It's been on there for 6 mos and its still almost impossible to remove the roundel. I think putting on a roundel with 3m tape should be sufficient considering my OEM roundel is sitting pretty after this many months!!!

[pdjafari]

Originally Posted by dvpouldar26

Can you post up pics of the underside of the Vorsteiner tyle spoiler to show where we have to apply the double sided tape? Also, is removing the badges and roundel necessary to install the spoiler?

When I had my authentic VOR the body shop had to place 3m tape on teh following locations and it worked flawlessly. Keep in mind I went through many high pressure car washes and drove very fast and never had any problems with it coming off or becoming loose!!

This pic I illustrated poorly should give you an idea of where you want to apply the 3m tape. More/less these areas will be flush with your trunk the center of the spoiler is slightly concave so placing 3m tape may not even touch the trunk..

[AKbmw]

anybody know how to remov the roundel from the car to put onto the decklid, also do you have to cut the two peices sticking out and just 3m tape it to the decklid?

[jaceaholic]

i would use dental floss, the emblem should be stuck on there with double sided tape..

[jaceaholic]

has anyone recieved the VSR decklid yet and fitted on the car with the emblem??

[Queenskid24]

Originally Posted by AKbmw

anybody know how to remov the roundel from the car to put onto the decklid, also do you have to cut the two peices sticking out and just 3m tape it to the decklid?

+1, id like to know too lol

[pdjafari]

^^ When I installed my authentic months ago I removed the roundel from the trunk with dental floss. Just wedge it between teh trunk/roundel and slowly move down pulling both sides downwards..

[adamaster]

Thanks for the orders

VSR Style Painted CFRP/CF Aero Deck Lid Spoiler orderd shipped
thank you
Adamaster

[darkphantom]

Originally Posted by X*****n

E93 spoiler in the works??

Why can't we just use these? are the dimensions of our trunks really that different? they look the same to me...I know the insides are totally different, but the decklid doesn't seem so...?

[pdjafari]

Originally Posted by darkphantom

Why can't we just use these? are the dimensions of our trunks really that different? they look the same to me...I know the insides are totally different, but the decklid doesn't seem so...?

well i think if you look at the e93 trunk vs e92 the e92 has lines that mesh with the rear quarter panel. I think the e92's lines are also more curved rounded whereas the e93s are more square.

Let me see if I can do a side by side

[Gtrain]

The emblem is not stuck on by double sided tape. It actually has two "pegs that go into the trunk. Use a flat plastic item to wedge between the emblem and trunk and just pull it out. Afterwards, take out the two rubber pieces that are in the two hole that help fill in the pegs of the emblem. Remember to cover up the two holes with small tape so that water doesn't get in after the trunk lid is installed. (i did it just in case)

[Prissy]

Hi Ada do you sell the front aero lip for E92? how much is painted shipped to 11358? Is it 100% perfect fitment like the oem areo lip? Also can I combine shipping with E92 Vorsteiner Style CFRP Aero Deck Lid Spoiler painted? please give me a quote with PM? Thanks! By the way do you have a shop in taiwan? I would love to get parts from you in the future when I am in taipei!

[adjmcloon]

I'd like to see a Hartge style front lip for the e90 like LT used to sell. Painted!

[jaceaholic]

Originally Posted by Gtrain

The emblem is not stuck on by double sided tape. It actually has two "pegs that go into the trunk. Use a flat plastic item to wedge between the emblem and trunk and just pull it out. Afterwards, take out the two rubber pieces that are in the two hole that help fill in the pegs of the emblem. Remember to cover up the two holes with small tape so that water doesn't get in after the trunk lid is installed. (i did it just in case)

acturally on my e92 the emblem is stuck on with double sided tape and the two plastic pegs it was a bitch to take off but i got it off.. hehehe..