Pittsburgh BMW Meets

brett335 · 09-11-2016, 03:46 PM

Quote:

Originally Posted by pits200

You xi or rwd. I'm in the process of getting upgraded turbos installed and it's a pretty big hassle if awd, same regarding inlets and outlets.

I'm XI. Not looking forward to all that's involved (subframe drop, etc), but there are modest gains with the inlets and figured I would do it all at once. Fortunately I will have a lift that I can work on...

milfriez · 09-12-2016, 08:14 AM

Quote:

Originally Posted by pits200

You xi or rwd. I'm in the process of getting upgraded turbos installed and it's a pretty big hassle if awd, same regarding inlets and outlets.

I'm XI also. What were you referring to that was a pretty big hassle? The downpipe?

All I have is ramps/jacks/stands, no lift.

LaxIan55 · 09-12-2016, 08:19 PM

Quote:

Originally Posted by milfriez

Quote:

Originally Posted by pits200

You xi or rwd. I'm in the process of getting upgraded turbos installed and it's a pretty big hassle if awd, same regarding inlets and outlets.

I'm XI also. What were you referring to that was a pretty big hassle? The downpipe?

All I have is ramps/jacks/stands, no lift.

Just did my xi downpipes on jackstands last weekend. They are as annoying as everyone says but not impossible by any means, 5 hours start to finish. Biggest annoyance was the factory bracket that wouldnt let it loose and the vband for the front down pipe on mine. Other than that pretty smooth and dropping the subframe wasn't bad at all. Definitely well worth the performance and sound gain!

FSociety · 09-23-2016, 11:02 AM

Inviting you guys to join us from NJ/NYC

Street Car Wars at ATCO Dragway in South Jerz (Best Track in tri-state area)
Friday Oct 7 & 14th

DIG or Roll Racing Sun Oct 23rd at Maple Grove Raceway in PA
Only 18 spots left

LaxIan55 · 10-06-2016, 11:28 PM

Anyone going to the NL tuning Oktoberfest show this Sunday in Greensburg?

brett335 · 10-08-2016, 08:57 PM

Can anyone recommend a good place for paint in/around Pittsburgh? I just picked up the m-sport conversion for my e90 and need to get it painted BSM.

Thanks fellas!
Brett

pits200 · 10-10-2016, 07:37 AM

Quote:

Originally Posted by brett335

Can anyone recommend a good place for paint in/around Pittsburgh? I just picked up the m-sport conversion for my e90 and need to get it painted BSM.

Thanks fellas!
Brett

I am getting the front of my car repainted as its been sandblasted from all the highway miles I've put on it. I'm going to a little place right off 88 and 51, we will see how it turns out.

What are you doing with your front oem bumper?

10-27-2016, 10:55 PM

Hey Yinz Guys! Any recommendations for a good indie mechanic around the 'Burgh? I live north of the city- Wexford area. Or anyone local DIY'd their water pump/thermostat and willing to share some advice?

In reference to: http://www.e90post.com/forums/showthread.php?t=1319169

pghmailman · 10-30-2016, 07:33 AM

I had mine done off of Route 8 just north of Route 228. Good guy and if you don't need a receipt and pay cash he'll give you a good deal. PM me for his info.

milfriez · 10-31-2016, 12:15 PM

Quote:

Originally Posted by bimfan

Hey Yinz Guys! Any recommendations for a good indie mechanic around the 'Burgh? I live north of the city- Wexford area. Or anyone local DIY'd their water pump/thermostat and willing to share some advice?

In reference to: http://www.e90post.com/forums/showthread.php?t=1319169

Hey, if you're up in wexford there is a shop just a little bit north in Zelienople. The guy works on all sorts of imports (a lot of VW/Porsche/Audi/BMW). Only problem is he is typically pretty busy. Does really good work though.

http://www.grspecialty.com

brett335 · 11-01-2016, 09:27 PM

Quote:

Originally Posted by bimfan

Hey Yinz Guys! Any recommendations for a good indie mechanic around the 'Burgh? I live north of the city- Wexford area. Or anyone local DIY'd their water pump/thermostat and willing to share some advice?

In reference to: http://www.e90post.com/forums/showthread.php?t=1319169

If my wife wasn't expecting in the next couple weeks I would say bring it to the South Hills and I could swap it out for you. I would recommend doing the thermostat as well. You'll also need the three fasteners as they're aluminum and should be replaced when you perform this service. I would only buy OEM parts. Reach out to my guy Armando whom works out of BMW of Manhattan, cheaper that anyone on the interwebs.

Armando Diaz
Wholesale Parts Manager
BMW/MINI of Manhattan
Armando.Diaz@bmwnyc.com
212-586-2269 Ext: 5303(Direct Line)
212-246-7375(Wholesale Hotline)
212-315-9560(Faxmail)
646-592-1410(Mobile)

Thanks
Brett

LaxIan55 · 11-01-2016, 09:39 PM

Quote:

Originally Posted by bimfan

Hey Yinz Guys! Any recommendations for a good indie mechanic around the 'Burgh? I live north of the city- Wexford area. Or anyone local DIY'd their water pump/thermostat and willing to share some advice?

In reference to: http://www.e90post.com/forums/showthread.php?t=1319169

There is a place called c&g performance in warrendale that I haven't had work done at yet but almost had them install my downpipes. Seem like a reputable group of guys though.

11-01-2016, 10:23 PM

Thanks for all the recommendations!
I went ahead and ordered the OEM Water Pump and Thermostat kit from Tischer. Parts should get here tomorrow. I'll let you know how it goes.

Lshaw · 11-14-2016, 12:28 PM

Winter wheel/tire set up.

http://www.e90post.com/forums/showthread.php?t=1319368

mose121 · 11-23-2016, 05:21 PM

If anyone is interested or in need...

http://www.m3post.com/forums/showthread.php?t=1321301

Quote:

I have a set of OEM 270m e9x winter wheels & tires that came off of my 2013 e92 M3. Wheels are in good condition, no curb rash only minor stuff from normal use. TPMS sensors are installed and included. Wheels were used lightly for 3 winters (have an X1 I usually drive in the winter) and 2 tires were replaced just before last winter. Tires are Michelin Pilot Alpin PA4's. Two have 7-8/32 and the other two have 8-9/32 of tread left. Will ship anywhere in the U.S. but buyer is responsible for shipping costs. This setup currently costs $3k new from the dealer.

Would also be willing to work out a trade deal for e9x ZCP style 359 wheels or other winter wheel/tire options that fit my 2016 F80 Competition Package (without carbon ceramic brake option).

muncie21 · 11-27-2016, 05:17 AM

Quote:

Originally Posted by pits200

I am getting the front of my car repainted as its been sandblasted from all the highway miles I've put on it. I'm going to a little place right off 88 and 51, we will see how it turns out.

What are you doing with your front oem bumper?

How'd that place work out for you? I'm needing to get my hood and bumper sprayed due to rock chips too

pits200 · 11-27-2016, 09:14 AM

Quote:

Originally Posted by muncie21

How'd that place work out for you? I'm needing to get my hood and bumper sprayed due to rock chips too

Lets just say, it's not worth it and you get what you pay for. Lesson learned but I couldn't justify spending $2,000 to repaint my hood and bumper.

Once again, I do not recommend Premier Auto Body, quality of work is very poor.

01-15-2017, 06:53 PM

Anyone in the 'Burgh willing to help me out with some coding?

I got the Lux Angels Eyes for Christmas and finally installed them today. They look awesome! But, I really want them setup as the DRLs for my '08 E90, which can apparently be done via coding. I downloaded BMW Coding Tool, NCS Expert, NCS Dummy, etc, but can't seem to figure it out.

I'd be more than happy to buy you a beer for the trouble...

pghmailman · 01-17-2017, 06:35 AM

I can code your drl's with the Carly app. Do you have a tune in the car and if so is it easily disabled. Shoot me a pm. I work graveyard and Tuesday evenings work best for me.

milfriez · 02-13-2017, 12:21 PM

Can't you just do this via the dash? That's how I did mine.

What's wrong with how they're setup in the picture above? Or are you talking about coding out the sidemarker?

03-04-2017, 04:45 PM

Quote:

Originally Posted by milfriez

Can't you just do this via the dash? That's how I did mine.

What's wrong with how they're setup in the picture above? Or are you talking about coding out the sidemarker?

I can turn DRLs on and off via the dash, but my DRLs include the inner headlight. I want just the halos as DRL.

The picture above is with the parking lights turned on, which had to be done manually each time. I'd like it to be automatic and without the side marker.

TheRedPanda · 03-29-2019, 09:50 AM

Hello! I really hope this gets noticed! (i'm not a bot btw, just really REALLY like this whole app)

DOWNLOAD RoadStr APP!!

It helps organize car meets and has a map on it that allows you to see other drivers in the area (if driving mode is on).

I have this app and it's really good. I'm looking to get a 2009 328i xDrive, but i have a red 2012 Acura TSX Special Edition with straight back exhaust system (no cat/resonator). I hope that I can help anyone set up RoadStr stuff. Find me on the app (or instagram) @the.Red_Panda

From Bethel Park and looking forward to just getting to car meets. Hope i get some notes or messages or something. Love this idea.

09-23-2016, 11:02 AM	#1786
FSociety IG @bmwF9xG80 3902 Rep 7,664 Posts Drives: G80 M3, X4M, G07 X7m50 Join Date: Apr 2012 Location: NYC to NJ to Orlando FL iTrader: (3) Garage List 2023 BMW G80 M3 [10.00] 2020 BMW X4MC [10.00] 16' BMW X4 M40i [10.00] 06 Cadillac STS [10.00]	Inviting you guys to join us from NJ/NYC Street Car Wars at ATCO Dragway in South Jerz (Best Track in tri-state area) Friday Oct 7 & 14th DIG or Roll Racing Sun Oct 23rd at Maple Grove Raceway in PA Only 18 spots left __________________ Current 23 G80 M3x \| 20 X7 M50 Previous 20 X4M, F90 M5, F80 M3 IG: @bmwF9xG80
	Appreciate 0 Quote

10-06-2016, 11:28 PM	#1787
LaxIan55 Second Lieutenant 92 Rep 223 Posts Drives: 335i E90 xdrive Join Date: Oct 2013 Location: Pittsburgh iTrader: (0)	Anyone going to the NL tuning Oktoberfest show this Sunday in Greensburg?
	Appreciate 0 Quote

10-08-2016, 08:57 PM	#1788
brett335 Enlisted Member 15 Rep 35 Posts Drives: 2009 335i XDrive Sedan Join Date: Nov 2014 Location: Pittsburgh, PA iTrader: (1)	Can anyone recommend a good place for paint in/around Pittsburgh? I just picked up the m-sport conversion for my e90 and need to get it painted BSM. Thanks fellas! Brett
	Appreciate 0 Quote

10-27-2016, 10:55 PM	#1790
bimfan Guest 0 Rep n/a Posts Drives:	Hey Yinz Guys! Any recommendations for a good indie mechanic around the 'Burgh? I live north of the city- Wexford area. Or anyone local DIY'd their water pump/thermostat and willing to share some advice? In reference to: http://www.e90post.com/forums/showthread.php?t=1319169
	Appreciate 0 Quote

10-30-2016, 07:33 AM	#1791
pghmailman New Member 12 Rep 12 Posts Drives: E92 335i xdrive Join Date: May 2016 Location: W.Pa iTrader: (0)	I had mine done off of Route 8 just north of Route 228. Good guy and if you don't need a receipt and pay cash he'll give you a good deal. PM me for his info.
	Appreciate 0 Quote

11-01-2016, 10:23 PM	#1795
bimfan Guest 0 Rep n/a Posts Drives:	Thanks Thanks for all the recommendations! I went ahead and ordered the OEM Water Pump and Thermostat kit from Tischer. Parts should get here tomorrow. I'll let you know how it goes.
	Appreciate 0 Quote

11-14-2016, 12:28 PM	#1796
Lshaw Lieutenant Colonel 256 Rep 1,873 Posts Drives: 09 335i 6mt Join Date: Oct 2007 Location: NYC/Pittsburgh iTrader: (21)	Winter wheel/tire set up. http://www.e90post.com/forums/showthread.php?t=1319368 __________________ 07 335xi (2007-2010) 08 Legacy Spec B (08-) 09 335i (2010-) 15 X5 xdrive 35i (2015-) 17 Forester XT (2016-)
	Appreciate 0 Quote

01-15-2017, 06:53 PM	#1800
bimfan Guest 0 Rep n/a Posts Drives:	DRL Coding Anyone in the 'Burgh willing to help me out with some coding? I got the Lux Angels Eyes for Christmas and finally installed them today. They look awesome! But, I really want them setup as the DRLs for my '08 E90, which can apparently be done via coding. I downloaded BMW Coding Tool, NCS Expert, NCS Dummy, etc, but can't seem to figure it out. I'd be more than happy to buy you a beer for the trouble... Attached Images Last edited by bimfan; 01-19-2017 at 09:04 PM.. Reason: Embed picture instead of link
	Appreciate 0 Quote

01-17-2017, 06:35 AM	#1801
pghmailman New Member 12 Rep 12 Posts Drives: E92 335i xdrive Join Date: May 2016 Location: W.Pa iTrader: (0)	I can code your drl's with the Carly app. Do you have a tune in the car and if so is it easily disabled. Shoot me a pm. I work graveyard and Tuesday evenings work best for me.
	Appreciate 0 Quote

02-13-2017, 12:21 PM	#1802
milfriez Private First Class 30 Rep 106 Posts Drives: 2007 TiAg 335xi Join Date: Oct 2015 Location: Western PA iTrader: (1)	Can't you just do this via the dash? That's how I did mine. What's wrong with how they're setup in the picture above? Or are you talking about coding out the sidemarker?
	Appreciate 0 Quote

03-29-2019, 09:50 AM	#1804
TheRedPanda Registered 1 Rep 4 Posts Drives: 2009 BMW 328i xDrive Join Date: Mar 2019 Location: Pennsylvania iTrader: (0)	Hello! I really hope this gets noticed! (i'm not a bot btw, just really REALLY like this whole app) DOWNLOAD RoadStr APP!! It helps organize car meets and has a map on it that allows you to see other drivers in the area (if driving mode is on). I have this app and it's really good. I'm looking to get a 2009 328i xDrive, but i have a red 2012 Acura TSX Special Edition with straight back exhaust system (no cat/resonator). I hope that I can help anyone set up RoadStr stuff. Find me on the app (or instagram) @the.Red_Panda From Bethel Park and looking forward to just getting to car meets. Hope i get some notes or messages or something. Love this idea.
	Appreciate 0 Quote