* The Official: San Diego Chat Thread (#4) *

hp jnkey · 06-01-2014, 09:30 AM

Quote:

Originally Posted by taylors335

im in for a local meet next week if anyone else wants too

Mason, you heading to HRE next weekend?

Bimmer335i · 06-02-2014, 03:03 PM

Good Monday, fellow San Diegans,

So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you!

vertspeed · 06-02-2014, 07:14 PM

I was just contemplating doing the same thing myself. While getting my car smogged last week at Bright Tech Auto here in Santee I asked the guy and he said he would just charge me like $20 if I brought all the materials. David Tran - His #619-449-0741

Bimmer335i · 06-03-2014, 10:43 AM

Quote:

Originally Posted by vertspeed

I was just contemplating doing the same thing myself. While getting my car smogged last week at Bright Tech Auto here in Santee I asked the guy and he said he would just charge me like $20 if I brought all the materials. David Tran - His #619-449-0741

Vertspeed, thanks for the info. I'll give David a call.

itsyawn · 06-03-2014, 11:03 AM

Can I borrow someones USB cable for a jb4? I think I have a bad cable that's preventing me from connecting to a laptop. I'm trying to update the jb4 g4 board. I am located in Mira Mesa.

SagaSupra · 06-03-2014, 12:25 PM

Quote:

Originally Posted by Bimmer335i

Good Monday, fellow San Diegans,

So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you!

If you decide to diy, and you are still having issues getting your car on a lift, you can always try driving your car on a couple sheets of wood. That should give you a few inches

Jeef · 06-03-2014, 03:00 PM

Quote:

Originally Posted by itsyawn

Can I borrow someones USB cable for a jb4? I think I have a bad cable that's preventing me from connecting to a laptop. I'm trying to update the jb4 g4 board. I am located in Mira Mesa.

Is there an error message? Did you set up the com port?

Quote:

Originally Posted by Bimmer335i

Good Monday, fellow San Diegans,

So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you!

We can do this for you! You need more than oil and an oil filter by the way

Bimmer335i · 06-03-2014, 03:42 PM

Quote:

Originally Posted by Jeef

Is there an error message? Did you set up the com port?

We can do this for you! You need more than oil and an oil filter by the way

Hahaha..you know I can do the change myself, done it before, but I guess it doesn't hurt to make friends over a 6-pack or something like that..so where can I bring my car to?

itsyawn · 06-03-2014, 09:37 PM

Quote:

Originally Posted by Jeef

Is there an error message? Did you set up the com port?

We can do this for you! You need more than oil and an oil filter by the way

Yes I tried changing the com port and all that. My car went into limp mode.

deluxe 247 · 06-04-2014, 02:49 PM

lookin to get back into a 335i, anyone see a good deal recently?

Mikkors · 06-04-2014, 08:55 PM

Lets shoot for Tuesday June 17th 7pm for a meet. Maybe meet in Liberty Station. Slater's 50/50?????

June 17th 7pm
Slater's 50/50
Liberty Station

List of people going!!!!!

1. Mikkors

Schmidty335i · 06-05-2014, 12:39 PM

itsyawn, i have a JB4 usb cable that you can borrow but I live in spring valley and wont be back till saturday.

Jeef · 06-05-2014, 01:01 PM

Quote:

Originally Posted by itsyawn

Quote:

Originally Posted by Jeef

Is there an error message? Did you set up the com port?

We can do this for you! You need more than oil and an oil filter by the way

Yes I tried changing the com port and all that. My car went into limp mode.

Limp mode... Check your jb4 wires

Dmon335 · 06-05-2014, 02:25 PM

Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.

Jeef · 06-05-2014, 03:13 PM

Quote:

Originally Posted by Dmon335

Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.

We are not an Indy shop. Will you let us do it? If not I understand.

GSEN820 · 06-05-2014, 03:49 PM

^^^ Let JEEF do the work...He is really good knows what he is doing....He did my work and will doing more with me in the future....

Gumball335 · 06-05-2014, 09:57 PM

Quote:

Originally Posted by Dmon335

Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.

theres "bimmerspeed" in san diego and "dosebmw" in el cajon. both very good shops, but im willing to bet bimmerspeed is a bit cheaper.

khaye1 · 06-05-2014, 10:15 PM

If anybody is in the mood for some bomb ass sandwiches, you guys need to peep supernatural sandwiches on miramar rd. If I'm recommending it, it's good! Super friendly staff too...the co-owner, tony, super nice guy.

06-07-2014, 01:29 PM

What up Peeps,
New to the forum and the 335I community. This is my first euro car so I am excited to see how this project goes.... anyone in the North San Diego area?

06-07-2014, 01:32 PM

I can try and get you a good deal on one. PM me.

E90SDGUY · 06-07-2014, 05:34 PM

Hey, just wanted to drop in to say hi. New to the Bimmer world and am located in the PQ area. I'm hoping to meet all of you soon and learn more about the E90. About my car, I have a white 07 335i and so far have install Cobb, downpipes, charge pipe with HKS BOV, carbon fiber trunk and an Injen dual intake. Everything has been installed by myself because I think it is the best way ti learn about the car. Let me know if anyone need help with anything and would be glad to help.

QuikSilvr · 06-07-2014, 06:56 PM

Quote:

Originally Posted by Elbambino1136

What up Peeps,
New to the forum and the 335I community. This is my first euro car so I am excited to see how this project goes.... anyone in the North San Diego area?

Welcome, I hope you will enjoy the 335 and the BMW Community.

Quote:

Originally Posted by E90SDGUY

Hey, just wanted to drop in to say hi. New to the Bimmer world and am located in the PQ area. I'm hoping to meet all of you soon and learn more about the E90. About my car, I have a white 07 335i and so far have install Cobb, downpipes, charge pipe with HKS BOV, carbon fiber trunk and an Injen dual intake. Everything has been installed by myself because I think it is the best way ti learn about the car. Let me know if anyone need help with anything and would be glad to help.

Welcome to the community, I also live in PQ.

06-02-2014, 03:03 PM	#1806
Bimmer335i Major 49 Rep 1,353 Posts Drives: 07 Sparkling Graphite 335i Sed Join Date: Jun 2007 Location: San Diego, CA US iTrader: (0)	Good Monday, fellow San Diegans, So over the weekend I tried to DIY my oil change, but found out that my car is too low for the Torin Hydraulic Jack. Does anyone have a really low jack that I can borrow so I can lift up my car? Or do you know if any oil change vendors, auto shops, etc would do the oil change with the oil and filter I provide? Appreciate any help. Thank you! __________________ Enjoy the ride!
	Appreciate 0 Quote

06-02-2014, 07:14 PM	#1807
vertspeed Second Lieutenant 8 Rep 213 Posts Drives: 08' 335i e93 Join Date: Apr 2011 Location: San Diego, CA iTrader: (8)	I was just contemplating doing the same thing myself. While getting my car smogged last week at Bright Tech Auto here in Santee I asked the guy and he said he would just charge me like $20 if I brought all the materials. David Tran - His #619-449-0741
	Appreciate 0 Quote

06-03-2014, 11:03 AM	#1809
itsyawn New Member 0 Rep 5 Posts Drives: 09 335i Join Date: Mar 2014 Location: San Diego, CA iTrader: (1)	Can I borrow someones USB cable for a jb4? I think I have a bad cable that's preventing me from connecting to a laptop. I'm trying to update the jb4 g4 board. I am located in Mira Mesa.
	Appreciate 0 Quote

06-04-2014, 02:49 PM	#1814
deluxe 247 Shake and Bake 32 Rep 494 Posts Drives: 2016 M4 Join Date: Mar 2011 Location: Los Angeles & San Diego iTrader: (3)	lookin to get back into a 335i, anyone see a good deal recently?
	Appreciate 0 Quote

06-04-2014, 08:55 PM	#1815
Mikkors Enlisted Member 2 Rep 35 Posts Drives: 2008 E92 335i Join Date: Jun 2012 Location: San Diego iTrader: (1)	Lets shoot for Tuesday June 17th 7pm for a meet. Maybe meet in Liberty Station. Slater's 50/50????? June 17th 7pm Slater's 50/50 Liberty Station List of people going!!!!! 1. Mikkors
	Appreciate 0 Quote

06-05-2014, 12:39 PM	#1816
Schmidty335i Lieutenant 43 Rep 412 Posts Drives: E92 335i PS2 turbo FBO JB4 Join Date: Jun 2014 Location: San Diego iTrader: (0)	itsyawn, i have a JB4 usb cable that you can borrow but I live in spring valley and wont be back till saturday.
	Appreciate 0 Quote

06-05-2014, 02:25 PM	#1818
Dmon335 New Member 0 Rep 19 Posts Drives: 335i \| JB4 G5 \| BMS DCI Join Date: Feb 2014 Location: SoCal iTrader: (0)	Anyone know of a shop that could install and code my new injectors... Looks like not many people wanna do this job and dealerships wanna charge me a arm and leg. Looking for a reputable Indy shop that could help here in San Diego.
	Appreciate 0 Quote

06-05-2014, 03:49 PM	#1820
GSEN820 Private First Class 65 Rep 145 Posts Drives: 2011 e92 M3 DCT Join Date: Aug 2011 Location: San Diego,CA iTrader: (2)	^^^ Let JEEF do the work...He is really good knows what he is doing....He did my work and will doing more with me in the future.... __________________ IG @gsen_820
	Appreciate 0 Quote

06-05-2014, 10:15 PM	#1822
khaye1 Colonel 150 Rep 2,811 Posts Drives: 18 AW F80 Join Date: Feb 2009 Location: San Diego iTrader: (8)	If anybody is in the mood for some bomb ass sandwiches, you guys need to peep supernatural sandwiches on miramar rd. If I'm recommending it, it's good! Super friendly staff too...the co-owner, tony, super nice guy. __________________
	Appreciate 0 Quote

06-07-2014, 01:29 PM	#1823
Elbambino1136 Guest 0 Rep n/a Posts Drives:	What up Peeps, New to the forum and the 335I community. This is my first euro car so I am excited to see how this project goes.... anyone in the North San Diego area?
	Appreciate 0 Quote

06-07-2014, 01:32 PM	#1824
Elbambino1136 Guest 0 Rep n/a Posts Drives:	I can try and get you a good deal on one. PM me.
	Appreciate 0 Quote

06-07-2014, 05:34 PM	#1825
E90SDGUY Private First Class 35 Rep 186 Posts Drives: 07 335i COBB and Stuff Join Date: Jun 2014 Location: San Diego iTrader: (2)	New Member Hey, just wanted to drop in to say hi. New to the Bimmer world and am located in the PQ area. I'm hoping to meet all of you soon and learn more about the E90. About my car, I have a white 07 335i and so far have install Cobb, downpipes, charge pipe with HKS BOV, carbon fiber trunk and an Injen dual intake. Everything has been installed by myself because I think it is the best way ti learn about the car. Let me know if anyone need help with anything and would be glad to help.
	Appreciate 0 Quote