What did you do to your car today?

BeastMode335i · 03-02-2015, 01:31 PM

There we go

I figured since the original BMS DCI picture was so large, I'd just draw one for you instead..

That Sonax stuff is my new favorite product ever..!! Next I'm going to try that SwissVax on my leather and see if I can get it to come out like that guy from YouTube who does the coral red seats and they come out looking phenominal!!

EzequielR · 03-02-2015, 02:09 PM

Forget to post in Friday, installed 15mm spacers upfront and 20mm in the rear, along with reinstalling my style 225M's. Will be posting a picture as soon as the snow clears up...

patsbimmer1 · 03-02-2015, 02:32 PM

Quote:

Originally Posted by MORTON

Hey thanks for the link man ill def check it out!! Ah I wish there was a black shift knob without the M///.

What do you think about this one from BavAuto?

The only part of that knob I don't like is the orange/red shift pattern on there. Other than that I like it!

Needbmwpartzz · 03-02-2015, 03:19 PM

Drove it!

patsbimmer1 · 03-02-2015, 03:43 PM

Quote:

Originally Posted by SHEEDI

Nice work,

looks great buttttttttttttttttttttttttttt see image below, the dash trim, the pattern going to right, shifter's and driver side small piece trim pattern going to left,

all trims are going left right left right left right

Fix itttttttttttttttttttt

Unfortunately you're not pointing anything out to me that I haven't noticed already lol. The only piece that bothers me is center console not matching up with the large dash piece. The problem that I had is they were 2 separate vinyl sheets that came from an ebay seller and they were rectangular. Long story short, I sent back the 2nd piece that I did the center console with to get a matching piece to the dash piece but received the same pattern

. I got sick of staring at the wood center console and decided to wrap it until I order more vinyl.

Eventually it will be fixed but for now I am content.

BeastMode335i · 03-02-2015, 04:43 PM

Link to where you bought your vinyl?

BeastMode335i · 03-02-2015, 04:47 PM

Quote:

Originally Posted by Bmw doubles

6 new fuel injectors index 12 in both banks and polished of the soot on the tips thanks to SoCal.BMW.Installs

Closer pics of the tips?

summiz · 03-02-2015, 05:11 PM

Got my car back from getting the water pump replaced under warrantee.

Socket · 03-03-2015, 03:11 AM

Installed M3 bumpers and side skirts

Aashenfox · 03-03-2015, 03:34 AM

Nice. I might have to do this. I was thinking of just the M lip on the stocker, it does look good, but hte M3 style is growing on me. Do the larger side air ducts make the oil cooler more effective? In fact, I'm guessing you have just as hot weather in the summer as we do in Greece, any oil heat problems generally?

EzequielR · 03-03-2015, 07:24 AM

Looking great brother!!!

patsbimmer1 · 03-03-2015, 09:12 PM

Quote:

Originally Posted by BeastMode335i

Link to where you bought your vinyl?

I was mistaken, when I went through my receipts it looks like it was an amazon seller I bought it through.

http://www.amazon.com/dp/B005HX6V4O/...332200_TE_item

Douche · 03-04-2015, 06:03 AM

Quote:

Originally Posted by Aashenfox

I haven't yet seen a CF steering wheel trim that doesn't look tacky to my eyes. I'll also do mine, but again I can't decide. I have a black/black/tan interior, so may even end up with just satin black all over. I'll probably try a few things. Fortunately, I love doing this kind of stuff.

EDIT: Actually I just decided, I'll do the steering wheel trim in matte black dip when I do the grilles. Its the OEM look (I have an M wheel, hope I can do it without screwing up the ///M sticker), I'm only realy doing it to fix up some wear, the only aspect of the interior I don't like is the walnut, walnut is for blasting valves!

You don't like this?

Quote:

Originally Posted by mojobmw_e90

I did my own.took me 2hrs for the entire inside trim

MORTON · 03-04-2015, 06:16 AM

Quote:

Originally Posted by Socket

Installed M3 bumpers and side skirts

I like

MORTON · 03-04-2015, 06:20 AM

Quote:

Originally Posted by Douche

You don't like this?

Doing the entire steering wheel PLUS all the trim is too much IMO.

Socket · 03-04-2015, 06:54 AM

Quote:

Originally Posted by Aashenfox

Nice. I might have to do this. I was thinking of just the M lip on the stocker, it does look good, but hte M3 style is growing on me. Do the larger side air ducts make the oil cooler more effective? In fact, I'm guessing you have just as hot weather in the summer as we do in Greece, any oil heat problems generally?

Thanks
Yes we have hot weather here in Australia.... never had problems with high oil temps

Aashenfox · 03-04-2015, 07:07 AM

Quote:

Originally Posted by Douche

You don't like this?

Quote:

Originally Posted by MORTON

Doing the entire steering wheel PLUS all the trim is too much IMO.

Yeh, I'm with Morton on that. Its too much, I also don't really like 'fake' carbon fiber that much, but I could handle it on the dash trim and door trims.

I would love to do the BMW full carbon trim, but IIRC it's $1800, when I saw that I actually laughed out loud at my desk, causing a colleague or two to turn around. What the fuck were they thinking? lol.

nyfg56 · 03-04-2015, 07:35 AM

M3 bumper and lip (please forgive winter mode

)

Douche · 03-04-2015, 10:33 AM

Quote:

Originally Posted by MORTON

Doing the entire steering wheel PLUS all the trim is too much IMO.

Quote:

Originally Posted by Aashenfox

Yeh, I'm with Morton on that. Its too much, I also don't really like 'fake' carbon fiber that much, but I could handle it on the dash trim and door trims.

I would love to do the BMW full carbon trim, but IIRC it's $1800, when I saw that I actually laughed out loud at my desk, causing a colleague or two to turn around. What the fuck were they thinking? lol.

You guys are right... Maybe when all is done it will be too much.

I think I'll go matte black on everything or leave the wheel as is (it's got just minor imperfections, doesn't really bother me, it's not gross) and do gloss or matte black on top of the wood.

MORTON · 03-04-2015, 11:17 AM

Quote:

Originally Posted by Douche

You guys are right... Maybe when all is done it will be too much.

I think I'll go matte black on everything or leave the wheel as is (it's got just minor imperfections, doesn't really bother me, it's not gross) and do gloss or matte black on top of the wood.

Ive been thinking of just doing the silver strips on the steering wheel along with my trim.. Getting it done this Friday so well play around with the extra pieces to see if it looks too much. If you like it bro keep it.

MORTON · 03-04-2015, 11:18 AM

Quote:

Originally Posted by nyfg56

M3 bumper and lip (please forgive winter mode

)

I like

Douche · 03-04-2015, 11:19 AM

Quote:

Originally Posted by MORTON

Ive been thinking of just doing the silver strips on the steering wheel along with my trim.. Getting it done this Friday so well play around with the extra pieces to see if it looks too much. If you like it bro keep it.

I like the silver strips

By the way, that's not my wheel in the picture

03-02-2015, 01:31 PM	#1805
BeastMode335i Maximus Decimus Meridius 1163 Rep 4,640 Posts Drives: F30 335i Join Date: Apr 2014 Location: Down South iTrader: (2)	There we go I figured since the original BMS DCI picture was so large, I'd just draw one for you instead.. That Sonax stuff is my new favorite product ever..!! Next I'm going to try that SwissVax on my leather and see if I can get it to come out like that guy from YouTube who does the coral red seats and they come out looking phenominal!! Attached Images __________________ F30 335i Melbourne Red Metallic M-Sport Package
	Appreciate 0 Quote

03-02-2015, 03:19 PM	#1808
Needbmwpartzz Colonel 853 Rep 2,792 Posts Drives: 2009 bmw 328i x-drive Join Date: Feb 2014 Location: Kitchener/Waterloo iTrader: (0)	Drove it!
	Appreciate 0 Quote

03-02-2015, 04:43 PM	#1810
BeastMode335i Maximus Decimus Meridius 1163 Rep 4,640 Posts Drives: F30 335i Join Date: Apr 2014 Location: Down South iTrader: (2)	Link to where you bought your vinyl?
	Appreciate 0 Quote

03-02-2015, 05:11 PM	#1812
summiz Enlisted Member 0 Rep 42 Posts Drives: 2009 BMW 335i Join Date: Nov 2014 Location: Las Vegas iTrader: (0)	Got my car back from getting the water pump replaced under warrantee.
	Appreciate 0 Quote

03-03-2015, 03:11 AM	#1813
Socket Lieutenant General 4634 Rep 11,945 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Installed M3 bumpers and side skirts Attached Images
	Appreciate 0 Quote

03-03-2015, 03:34 AM	#1814
Aashenfox Captain 128 Rep 663 Posts Drives: 08 E92 335xi 6AT Join Date: Jan 2015 Location: Brit in Greece iTrader: (0)	Nice. I might have to do this. I was thinking of just the M lip on the stocker, it does look good, but hte M3 style is growing on me. Do the larger side air ducts make the oil cooler more effective? In fact, I'm guessing you have just as hot weather in the summer as we do in Greece, any oil heat problems generally? __________________ 08 E92 335xi 6AT, Sapphire Black Metallic Modlist: 19x8.5+32/19x9.5+35 BBS CH-R Black, Michelin PSS 225/35/19 - 255/30/19, rolled rear fenders \| KW v3 coilovers \| Akrapovic exhaust Keep it on the black stuff shiny side up!
	Appreciate 0 Quote

03-04-2015, 07:35 AM	#1822
nyfg56 Captain 103 Rep 857 Posts Drives: 2010 E90 M3 AW/Fox Red 6MT Join Date: Nov 2013 Location: Albany NY iTrader: (2)	M3 bumper and lip (please forgive winter mode ) Attached Images
	Appreciate 0 Quote