What did you do to your car today?

MORTON · 03-04-2015, 12:20 PM

Quote:

Originally Posted by BeastMode335i

There we go

I figured since the original BMS DCI picture was so large, I'd just draw one for you instead..

That Sonax stuff is my new favorite product ever..!! Next I'm going to try that SwissVax on my leather and see if I can get it to come out like that guy from YouTube who does the coral red seats and they come out looking phenominal!!

That rendering looks cool!

MORTON · 03-04-2015, 12:21 PM

Quote:

Originally Posted by Douche

I like the silver strips

By the way, that's not my wheel in the picture

I noticed you quoted someone on that.

Douche · 03-04-2015, 12:26 PM

Quote:

Originally Posted by MORTON

I noticed you quoted someone on that.

Oh ok.

Yeah cause I thought it looked good and is very well done. But I honestly hadn't thought of the fact that I also want to cover my wood trim... And you mentioned it'd be too much, and I agree. I don't like my car flashy, so I may have to stick to a black pattern, as the CF is a bit too much on its own.

Efini · 03-04-2015, 12:28 PM

nothing. i love having to do nothing.

MORTON · 03-04-2015, 12:30 PM

Quote:

Originally Posted by Douche

Oh ok.

Yeah cause I thought it looked good and is very well done. But I honestly hadn't thought of the fact that I also want to cover my wood trim... And you mentioned it'd be too much, and I agree. I don't like my car flashy, so I may have to stick to a black pattern, as the CF is a bit too much on its own.

I sort of agree with you. A lot of CF would look too much but just the dash I personally think looks at least better than wood. Plus certain models come with CF trim so it isn't outlandish by any means.

patsbimmer1 · 03-04-2015, 09:49 PM

I threw some H&R race springs over the weekend and I am pleased with the results.
In total it is lowered 1 1/4" in the front and 1" in the back.

loveskiing · 03-05-2015, 12:23 AM

Well I started it up...listened to that growl...took her for a ride...had some guys in a modded Camero tell me that my car was the sh*t...had another guy stop me to ask about the slotted rotors...and another in a tricked out pick-up rev his engine and peel out in a vain attempt to race him...
Another day in the life of a BMW...

dassub · 03-05-2015, 03:08 PM

Quote:

Originally Posted by Douche

How so?
Did you have sport suspension?

Stock springs, non-sport suspension. The Bilstein HD are stiffer and more grounded.

dassub · 03-05-2015, 03:11 PM

Quote:

Originally Posted by MORTON

how much did you pay?

A lot

Best to check local prices for parts and labour (3 hours backs, 5 hours fronts).

Douche · 03-05-2015, 03:11 PM

Quote:

Originally Posted by dassub

Stock springs, non-sport suspension. The Bilstein HD are stiffer and more grounded.

Oh thanks.
Because I have sport suspension (which is already stiffer and grounded as you said) I was interested in knowing how they'd compare. I guess there's not much gain for me in swapping it out, is there? I'm not into lowering, and my car is already very low.

phubar · 03-05-2015, 03:21 PM

Made my own CREE LED reverse lights, total cost $10

View post on imgur.com

dassub · 03-05-2015, 03:54 PM

Quote:

Originally Posted by Douche

Oh thanks.
Because I have sport suspension (which is already stiffer and grounded as you said) I was interested in knowing how they'd compare. I guess there's not much gain for me in swapping it out, is there? I'm not into lowering, and my car is already very low.

I don't think there would be much to gain at all (and also not entirely sure that Bilstein HD would be a direct replacement for sport).
The stock suspension was not very good, and especially bad once it starts to wear and and the struts start to leak.

BeastMode335i · 03-05-2015, 04:00 PM

Quote:

Originally Posted by phubar

Made my own CREE LED reverse lights, total cost $10

View post on imgur.com

Any errors?

phubar · 03-05-2015, 05:31 PM

None

Douche · 03-05-2015, 09:05 PM

LED interior plus LED licence plate light.

Tom Droze · 03-05-2015, 10:17 PM

MFactory LSD and M3 differential bushings. Paid $652 to have the LSD installed and for the shop to R&R the differential and install the bushings.

M3maniac20 · 03-05-2015, 10:38 PM

Just felt bad because my car is so dirty from our interesting Teas weather. Can't wait to detail it this weekend!

Soles330i · 03-05-2015, 10:39 PM

screwed in my floor mat holders...

been lazy with that but got my new mats delivered today, so why not?

YouAreMyWorld · 03-05-2015, 10:52 PM

Blacked out my kidney grills and took her in for a nice wash.

Note:

Brand new owner of a 10' 335i, barely had her for a little over two weeks now! I'm just in love with it!

Titanium Silver with black rims and have been spending almost all of my spare time researching and reading all that I can with what this forum has to offer!

SAADTHESAV · 03-05-2015, 10:55 PM

Quote:

Originally Posted by YouAreMyWorld

Blacked out my kidney grills and took her in for a nice wash.

Note:

Brand new owner of a 10' 335i, barely had her for a little over two weeks now! I'm just in love with it!

Titanium Silver with black rims and have been spending almost all of my spare time researching and reading all that I can with what this forum has to offer!

Damn upload a pic! and congrats on your 1st post!

LandoT · 03-05-2015, 11:01 PM

I replaced my #3 ignition coil and added an afe intake.

YouAreMyWorld · 03-06-2015, 01:45 AM

Quote:

Originally Posted by SAADTHESAV

Damn upload a pic! and congrats on your 1st post!

Thank you!

And I shall tomorrow morning when there's proper lighting

03-04-2015, 12:28 PM	#1830
Efini Silent Service 102 Rep 977 Posts Drives: BMW Join Date: Jun 2013 Location: Orange County, CA iTrader: (2)	nothing. i love having to do nothing.
	Appreciate 0 Quote

03-04-2015, 09:49 PM	#1832
patsbimmer1 Second Lieutenant 179 Rep 280 Posts Drives: E90 SSii M3 Join Date: Oct 2014 Location: North Prairie, WI iTrader: (0)	I threw some H&R race springs over the weekend and I am pleased with the results. In total it is lowered 1 1/4" in the front and 1" in the back.
	Appreciate 0 Quote

03-05-2015, 12:23 AM	#1833
loveskiing Lieutenant Colonel 971 Rep 1,612 Posts Drives: 2011 M3 E90 Join Date: Aug 2012 Location: Portland, OR iTrader: (0)	Well I started it up...listened to that growl...took her for a ride...had some guys in a modded Camero tell me that my car was the sh*t...had another guy stop me to ask about the slotted rotors...and another in a tricked out pick-up rev his engine and peel out in a vain attempt to race him... Another day in the life of a BMW...
	Appreciate 0 Quote

03-05-2015, 03:21 PM	#1837
phubar Lieutenant 91 Rep 465 Posts Drives: 335 Vert Join Date: Apr 2013 Location: Fort Campbell KY iTrader: (8)	Made my own CREE LED reverse lights, total cost $10 View post on imgur.com View post on imgur.com View post on imgur.com View post on imgur.com
	Appreciate 0 Quote

03-05-2015, 05:31 PM	#1840
phubar Lieutenant 91 Rep 465 Posts Drives: 335 Vert Join Date: Apr 2013 Location: Fort Campbell KY iTrader: (8)	None
	Appreciate 0 Quote

03-05-2015, 09:05 PM	#1841
Douche Banned 466 Rep 1,980 Posts Drives: Car Join Date: Jan 2015 Location: Location iTrader: (0)	LED interior plus LED licence plate light.
	Appreciate 1 Quote

03-05-2015, 10:17 PM	#1842
Tom Droze Major 413 Rep 1,286 Posts Drives: 2012 BMW 328i (e92) Join Date: Jul 2014 Location: Scottsdale, Arizona iTrader: (0)	MFactory LSD and M3 differential bushings. Paid $652 to have the LSD installed and for the shop to R&R the differential and install the bushings. __________________ 2012 Jet Black 328i Coupe / ESS Tuning Gen. 2 Supercharger / Evolution Racewerks Oil Cooler / BMS Oil Catch Can / BMW Performance Exhaust with Dinan Y Pipe / Eibach Pro Kit Springs / Koni FSD Shocks / MFactory LSD & Differential Bushings / Performance Rear Trailing Arms / BMW Performance Strut Brace / Stop Tech Slotted Rotors / Hawk HPS 5.0 / SS Brake Lines / Brass Guide Pins / M3 Front Control Arms, 28 MM FSB, Engine Cowl, and DCT Paddle Shifters / Michelin PSS / APEX ARC-8
	Appreciate 0 Quote

03-05-2015, 10:38 PM	#1843
M3maniac20 Captain 91 Rep 725 Posts Drives: 2013 BMW 335is Coupe Join Date: Aug 2010 Location: Austin, Texas iTrader: (0)	Just felt bad because my car is so dirty from our interesting Teas weather. Can't wait to detail it this weekend! __________________ 2016 340i M-Sport 6-MT(on order) 2013 335is (still have) 2011.5 M3 ZCP (traded in)
	Appreciate 0 Quote

03-05-2015, 10:39 PM	#1844
Soles330i Private First Class 15 Rep 136 Posts Drives: 06 330i Join Date: Feb 2015 Location: San Diego iTrader: (0)	screwed in my floor mat holders... been lazy with that but got my new mats delivered today, so why not?
	Appreciate 0 Quote

03-05-2015, 10:52 PM	#1845
YouAreMyWorld ///Project Aura 392 Rep 889 Posts Drives: Mineral White ///M-Sport 335i Join Date: Feb 2015 Location: Los Angeles iTrader: (0)	Blacked out my kidney grills and took her in for a nice wash. Note: Brand new owner of a 10' 335i, barely had her for a little over two weeks now! I'm just in love with it! Titanium Silver with black rims and have been spending almost all of my spare time researching and reading all that I can with what this forum has to offer!
	Appreciate 0 Quote

03-05-2015, 11:01 PM	#1847
LandoT Private First Class 10 Rep 113 Posts Drives: 2011 E91 328xi Join Date: May 2014 Location: IL iTrader: (2) Garage List 2011 E91 328i xDrive [0.00]	I replaced my #3 ignition coil and added an afe intake. Attached Images
	Appreciate 0 Quote