[Showsol2211]

Offer submitted!!

[antiks]

the same guy took $85

[matrix76]

Originally Posted by antiks

the same guy took $85

NICE!!!!!!!!!!!!!!!!!!!!!

[DESI4life10]

I wonder if there is a way to adjust the sensitivity of the automatic wipers.

My mini allows me to adjust the sensitivity through the bc switch.

[The_DDub]

Originally Posted by Showsol2211

Thats exactly what I want to hear! I was just confused because some say that it doesn't work with anything pre 2007. I want to order this because my retrofitted alarm is really quiet. Apparently there is a setting to crank it up a tad?

It sure as hell works. I've coded a few 2006s so, yup it works

[spazticrecords]

I also notice that ERROR_EJECT and KOMFORT_EJECT have been X'ed on the spreadsheet to work with all of the model years. I have tried it on many different models and haven't had it work once. I think that that function is limited to cars such as the E65 that have extra electronics up there to physically eject the key. Maybe this should be removed from the spreadsheet as well or the X's removed.

Funny, this was one of the first things I tried coding and couldn't get it work and thought it was my car. It wasn't until someone posted a few back that it works without CA and you need to hold the start/stop. Kind of nice, because you have choice of both (act normal) or hold start/stop and key will auto eject. I will update the spreadsheet later with instructions. Also, what is "ERROR_EJECT" I don't see that on the spreadsheet?

[Showsol2211]

Originally Posted by The_DDub

It sure as hell works. I've coded a few 2006s so, yup it works

Great news!! Thanks!

[Neutrino45]

Originally Posted by spazticrecords

I also notice that ERROR_EJECT and KOMFORT_EJECT have been X'ed on the spreadsheet to work with all of the model years. I have tried it on many different models and haven't had it work once. I think that that function is limited to cars such as the E65 that have extra electronics up there to physically eject the key. Maybe this should be removed from the spreadsheet as well or the X's removed.

Please don't delete a function if it works for some people. Let's just assume that it works if someone puts an X next to the model year. Let's not delete it please.

[Pseudo Nim]

Originally Posted by DESI4life10

I wonder if there is a way to adjust the sensitivity of the automatic wipers.

My mini allows me to adjust the sensitivity through the bc switch.

ya uh .. there's a little rotating thing on the right stalk. that controls it i wish my mini had that so that i didn't have to go to the stupid BC for it.

[outie]

Originally Posted by Pseudo Nim

ya uh .. there's a little rotating thing on the right stalk. that controls it i wish my mini had that so that i didn't have to go to the stupid BC for it.

I thought that only changes the frequency of the wipers but not the sensitivity.

[DESI4life10]

Originally Posted by Pseudo Nim

ya uh .. there's a little rotating thing on the right stalk. that controls it i wish my mini had that so that i didn't have to go to the stupid BC for it.

I am talking about the automatic wipers switch.

Sometimes it is too sensitive. The mini you can change the sensitivity depending on how much rain you want on the windshield before it wipes.

[Pseudo Nim]

Originally Posted by outie

I thought that only changes the frequency of the wipers but not the sensitivity.

Originally Posted by DESI4life10

I am talking about the automatic wipers switch.

Sometimes it is too sensitive. The mini you can change the sensitivity depending on how much rain you want on the windshield before it wipes.

That rotating thing sets the sensitivity in a car with a premium package. Try it!

[BeWide]

Hello here,

I write this message to make a list of all the people who seem to find no solution with this cable to make it work.

Thank you post a message here or mp.

[JETBLK335i]

Originally Posted by JETBLK335i

Hi all, I'm doing this from a blackberry, but can someone please help me with the code to remove this error?

we cannot find the values for this error. tried to use the values from halogen to xenon did not work.

this swap i did was AHL xenon to NONAHL xenon.

does anyone know the values?

Thanks all.

[JETBLK335i]

error

[xxxjecxxx]

Originally Posted by JETBLK335i

error

same error during my swap

licht_an_warnung -- look for a similar value in your frm or nfrm.

worked for me. had to drive around for a few minutes.

[DESI4life10]

Originally Posted by Pseudo Nim

That rotating thing sets the sensitivity in a car with a premium package. Try it!

Ahhh..I see what your talking about...nice gonna try this out.

Thanks bud for the tip

[spazticrecords]

I've been working on DVD in motion for last couple of months for CIC system. If you are located in Westchester, NY e-mail me at ************************* for testing.

[Pseudo Nim]

Originally Posted by DESI4life10

Ahhh..I see what your talking about...nice gonna try this out.

Thanks bud for the tip

np. the random things we find i hate the way Mini did it, btw. totally can't do it "quickly".

btw: i find it funny that we both have the same car collection.

[Pseudo Nim]

spaztic - do you have paddle shift by any chance? could you dump me your VO / FSW_PSW if you do? i'm still trying to figure out what's different in a paddle shift car

[el-drifot]

No wonder why comfort_eject didnt work.

Just HOLD the Start / Stop button, and it will work

Greetz
El-Drifto

[Pseudo Nim]

Originally Posted by el-drifot

No wonder why comfort_eject didnt work.

Just HOLD the Start / Stop button, and it will work

Greetz
El-Drifto

haha nice find. i guess it's a neat feature, although the actual TIME spent pushing the stop button is probably the same as just pushing the key in. but it's fun to have